VoIPStreamTrafficTest

Package: inet.examples.voipstream.VoIPStreamTrafficTest

VoIPStreamTrafficTest

network

(no description)

client : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: client: StandardHost { parameters: @display("p=54,133;i=device/laptop_l"); } switch : EthernetSwitch EthernetSwitch models a Layer 2 Ethernet switch with support for various IEEE 802.1 protocols and... Source: switch: EthernetSwitch { parameters: @display("p=190,224;i=device/switch"); } router2 : Router A network router device with support for multiple routing protocols and network interfaces. Source: router2: Router { parameters: @display("p=376,297;i=abstract/router"); } router1 : Router A network router device with support for multiple routing protocols and network interfaces. Source: router1: Router { parameters: @display("p=266,144;i=abstract/router"); } server : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: server: StandardHost { parameters: @display("p=589,58;i=device/server_l"); } configurator : Ipv4NetworkConfigurator Assigns IPv4 addresses and sets up static routing for an IPv4 network. Source: configurator: Ipv4NetworkConfigurator { parameters: config = xml("<config><interface hosts='*' address='10.0.x.x' netmask='255.255.x.x'/></config>"); @display("p=44,19;i=block/cogwheel_s"); } host1 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: host1: StandardHost { @display("p=54,310"); } host2 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: host2: StandardHost { @display("p=589,332"); } switch2 : EthernetSwitch EthernetSwitch models a Layer 2 Ethernet switch with support for various IEEE 802.1 protocols and... Source: switch2: EthernetSwitch { @display("p=473,224"); }

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork
display bgb=750,447

Unassigned submodule parameters

Name Type Default value Description
client.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.status.initialStatus string "UP"

TODO @signal, @statistic
client.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.environment.initStage int 0

Initialization stage for the setup command
client.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
client.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
client.environment.setupCommand string ""

A host OS system command
client.environment.teardownCommand string ""

A host OS system command
client.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.pcapRecorder.verbose bool true

Whether to log packets on the module output
client.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
client.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
client.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
client.pcapRecorder.fileFormat string "pcapng"
client.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
client.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
client.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
client.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
client.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
client.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
client.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
client.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
client.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
client.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
client.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
client.cb.forwardServiceRegistration bool true
client.cb.forwardProtocolRegistration bool true
client.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
client.bl.forwardServiceRegistration bool true
client.bl.forwardProtocolRegistration bool true
client.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.li.interfaceTableModule string

Module path to the ~InterfaceTable module
client.li.forwardServiceRegistration bool true
client.li.forwardProtocolRegistration bool true
client.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client.eth.bitrate double
client.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
client.nl.forwardServiceRegistration bool true
client.nl.forwardProtocolRegistration bool true
client.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
client.tn.forwardServiceRegistration bool true
client.tn.forwardProtocolRegistration bool true
client.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client.at.interfaceTableModule string

Module path to the ~InterfaceTable module
client.at.forwardServiceRegistration bool true
client.at.forwardProtocolRegistration bool true
client.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch.macTable.agingTime double
switch.macTable.forwardingTableFile string
switch.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
switch.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch.status.initialStatus string "UP"

TODO @signal, @statistic
switch.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch.pcapRecorder.verbose bool true

Whether to log packets on the module output
switch.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
switch.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
switch.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
switch.pcapRecorder.fileFormat string "pcapng"
switch.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
switch.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
switch.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
switch.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
switch.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
switch.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
switch.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
switch.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
switch.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
switch.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
switch.mrp.ccmInterval double
switch.mrp.mrpRole string
switch.mrp.timingProfile int
switch.mrp.uuid0 int
switch.mrp.uuid1 int
switch.mrp.ringPort1 int
switch.mrp.ringPort2 int
switch.mrp.interconnectionLinkCheckAware bool
switch.mrp.interconnectionRingCheckAware bool
switch.mrp.nonblockingMrcSupported bool
switch.mrp.reactOnLinkChange bool
switch.mrp.visualize bool
switch.stp.helloTime double
switch.stp.forwardDelay double
switch.stp.maxAge double
switch.stp.bridgePriority int
switch.stp.visualize bool
switch.gptp.gptpNodeType string "BRIDGE_NODE"
switch.sc.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch.sc.interfaceTableModule string

Module path to the ~InterfaceTable module
switch.sc.forwardServiceRegistration bool true
switch.sc.forwardProtocolRegistration bool true
switch.sc.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch.sc.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch.sc.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
switch.cb.forwardServiceRegistration bool true
switch.cb.forwardProtocolRegistration bool true
switch.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
switch.bl.forwardServiceRegistration bool true
switch.bl.forwardProtocolRegistration bool true
switch.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch.li.interfaceTableModule string

Module path to the ~InterfaceTable module
switch.li.forwardServiceRegistration bool true
switch.li.forwardProtocolRegistration bool true
switch.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch.eth.bitrate double
router2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.status.initialStatus string "UP"

TODO @signal, @statistic
router2.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.environment.initStage int 0

Initialization stage for the setup command
router2.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
router2.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
router2.environment.setupCommand string ""

A host OS system command
router2.environment.teardownCommand string ""

A host OS system command
router2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.pcapRecorder.verbose bool true

Whether to log packets on the module output
router2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
router2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
router2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
router2.pcapRecorder.fileFormat string "pcapng"
router2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
router2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
router2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
router2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
router2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
router2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
router2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
router2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
router2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
router2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
router2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
router2.cb.forwardServiceRegistration bool true
router2.cb.forwardProtocolRegistration bool true
router2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
router2.bl.forwardServiceRegistration bool true
router2.bl.forwardProtocolRegistration bool true
router2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
router2.li.forwardServiceRegistration bool true
router2.li.forwardProtocolRegistration bool true
router2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router2.eth.bitrate double
router2.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
router2.nl.forwardServiceRegistration bool true
router2.nl.forwardProtocolRegistration bool true
router2.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router2.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router2.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router2.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
router2.tn.forwardServiceRegistration bool true
router2.tn.forwardProtocolRegistration bool true
router2.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router2.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router2.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router2.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router2.at.interfaceTableModule string

Module path to the ~InterfaceTable module
router2.at.forwardServiceRegistration bool true
router2.at.forwardProtocolRegistration bool true
router2.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router2.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router2.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router2.bgp.interfaceTableModule string

The path to the InterfaceTable module
router2.bgp.routingTableModule string
router2.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
router1.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.status.initialStatus string "UP"

TODO @signal, @statistic
router1.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.environment.initStage int 0

Initialization stage for the setup command
router1.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
router1.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
router1.environment.setupCommand string ""

A host OS system command
router1.environment.teardownCommand string ""

A host OS system command
router1.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.pcapRecorder.verbose bool true

Whether to log packets on the module output
router1.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
router1.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
router1.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
router1.pcapRecorder.fileFormat string "pcapng"
router1.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
router1.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
router1.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
router1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
router1.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
router1.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
router1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
router1.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
router1.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
router1.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router1.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
router1.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
router1.cb.forwardServiceRegistration bool true
router1.cb.forwardProtocolRegistration bool true
router1.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router1.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router1.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router1.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
router1.bl.forwardServiceRegistration bool true
router1.bl.forwardProtocolRegistration bool true
router1.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router1.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router1.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router1.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.li.interfaceTableModule string

Module path to the ~InterfaceTable module
router1.li.forwardServiceRegistration bool true
router1.li.forwardProtocolRegistration bool true
router1.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router1.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router1.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router1.eth.bitrate double
router1.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
router1.nl.forwardServiceRegistration bool true
router1.nl.forwardProtocolRegistration bool true
router1.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router1.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router1.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router1.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
router1.tn.forwardServiceRegistration bool true
router1.tn.forwardProtocolRegistration bool true
router1.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router1.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router1.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router1.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router1.at.interfaceTableModule string

Module path to the ~InterfaceTable module
router1.at.forwardServiceRegistration bool true
router1.at.forwardProtocolRegistration bool true
router1.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router1.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router1.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router1.bgp.interfaceTableModule string

The path to the InterfaceTable module
router1.bgp.routingTableModule string
router1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
server.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.status.initialStatus string "UP"

TODO @signal, @statistic
server.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.environment.initStage int 0

Initialization stage for the setup command
server.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
server.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
server.environment.setupCommand string ""

A host OS system command
server.environment.teardownCommand string ""

A host OS system command
server.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.pcapRecorder.verbose bool true

Whether to log packets on the module output
server.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
server.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
server.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
server.pcapRecorder.fileFormat string "pcapng"
server.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
server.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
server.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
server.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
server.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
server.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
server.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
server.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
server.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
server.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
server.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
server.cb.forwardServiceRegistration bool true
server.cb.forwardProtocolRegistration bool true
server.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
server.bl.forwardServiceRegistration bool true
server.bl.forwardProtocolRegistration bool true
server.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.li.interfaceTableModule string

Module path to the ~InterfaceTable module
server.li.forwardServiceRegistration bool true
server.li.forwardProtocolRegistration bool true
server.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.eth.bitrate double
server.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
server.nl.forwardServiceRegistration bool true
server.nl.forwardProtocolRegistration bool true
server.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
server.tn.forwardServiceRegistration bool true
server.tn.forwardProtocolRegistration bool true
server.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.at.interfaceTableModule string

Module path to the ~InterfaceTable module
server.at.forwardServiceRegistration bool true
server.at.forwardProtocolRegistration bool true
server.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
configurator.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.assignAddresses bool true

Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.updateRoutes bool false

Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology bool false

Print extracted network topology to the module output
configurator.dumpLinks bool false

Print recognized network links to the module output
configurator.dumpAddresses bool false

Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
host1.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.status.initialStatus string "UP"

TODO @signal, @statistic
host1.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.environment.initStage int 0

Initialization stage for the setup command
host1.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
host1.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
host1.environment.setupCommand string ""

A host OS system command
host1.environment.teardownCommand string ""

A host OS system command
host1.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.pcapRecorder.verbose bool true

Whether to log packets on the module output
host1.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
host1.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
host1.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
host1.pcapRecorder.fileFormat string "pcapng"
host1.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
host1.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
host1.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
host1.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
host1.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
host1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
host1.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
host1.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host1.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host1.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
host1.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.cb.forwardServiceRegistration bool true
host1.cb.forwardProtocolRegistration bool true
host1.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.bl.forwardServiceRegistration bool true
host1.bl.forwardProtocolRegistration bool true
host1.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.li.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.li.forwardServiceRegistration bool true
host1.li.forwardProtocolRegistration bool true
host1.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.eth.bitrate double
host1.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.nl.forwardServiceRegistration bool true
host1.nl.forwardProtocolRegistration bool true
host1.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.tn.forwardServiceRegistration bool true
host1.tn.forwardProtocolRegistration bool true
host1.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.at.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.at.forwardServiceRegistration bool true
host1.at.forwardProtocolRegistration bool true
host1.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.status.initialStatus string "UP"

TODO @signal, @statistic
host2.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.environment.initStage int 0

Initialization stage for the setup command
host2.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
host2.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
host2.environment.setupCommand string ""

A host OS system command
host2.environment.teardownCommand string ""

A host OS system command
host2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.pcapRecorder.verbose bool true

Whether to log packets on the module output
host2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
host2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
host2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
host2.pcapRecorder.fileFormat string "pcapng"
host2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
host2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
host2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
host2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
host2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
host2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
host2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
host2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
host2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.cb.forwardServiceRegistration bool true
host2.cb.forwardProtocolRegistration bool true
host2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.bl.forwardServiceRegistration bool true
host2.bl.forwardProtocolRegistration bool true
host2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.li.forwardServiceRegistration bool true
host2.li.forwardProtocolRegistration bool true
host2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.eth.bitrate double
host2.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.nl.forwardServiceRegistration bool true
host2.nl.forwardProtocolRegistration bool true
host2.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.tn.forwardServiceRegistration bool true
host2.tn.forwardProtocolRegistration bool true
host2.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.at.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.at.forwardServiceRegistration bool true
host2.at.forwardProtocolRegistration bool true
host2.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.macTable.agingTime double
switch2.macTable.forwardingTableFile string
switch2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
switch2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.status.initialStatus string "UP"

TODO @signal, @statistic
switch2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.pcapRecorder.verbose bool true

Whether to log packets on the module output
switch2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
switch2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
switch2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
switch2.pcapRecorder.fileFormat string "pcapng"
switch2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
switch2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
switch2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
switch2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
switch2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
switch2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
switch2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
switch2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
switch2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
switch2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
switch2.mrp.ccmInterval double
switch2.mrp.mrpRole string
switch2.mrp.timingProfile int
switch2.mrp.uuid0 int
switch2.mrp.uuid1 int
switch2.mrp.ringPort1 int
switch2.mrp.ringPort2 int
switch2.mrp.interconnectionLinkCheckAware bool
switch2.mrp.interconnectionRingCheckAware bool
switch2.mrp.nonblockingMrcSupported bool
switch2.mrp.reactOnLinkChange bool
switch2.mrp.visualize bool
switch2.stp.helloTime double
switch2.stp.forwardDelay double
switch2.stp.maxAge double
switch2.stp.bridgePriority int
switch2.stp.visualize bool
switch2.gptp.gptpNodeType string "BRIDGE_NODE"
switch2.sc.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.sc.interfaceTableModule string

Module path to the ~InterfaceTable module
switch2.sc.forwardServiceRegistration bool true
switch2.sc.forwardProtocolRegistration bool true
switch2.sc.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch2.sc.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch2.sc.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
switch2.cb.forwardServiceRegistration bool true
switch2.cb.forwardProtocolRegistration bool true
switch2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
switch2.bl.forwardServiceRegistration bool true
switch2.bl.forwardProtocolRegistration bool true
switch2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
switch2.li.forwardServiceRegistration bool true
switch2.li.forwardProtocolRegistration bool true
switch2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.eth.bitrate double

Source code

network VoIPStreamTrafficTest
{
    @display("bgb=750,447");
    types:
        channel line1 extends DatarateChannel
        {
            parameters:
                delay = 100us;
                datarate = 100Mbps;
        }

        channel line2 extends DatarateChannel
        {
            parameters:
                delay = 10us;
                datarate = 100Mbps;
        }
    submodules:
        client: StandardHost {
            parameters:
                @display("p=54,133;i=device/laptop_l");
        }
        switch: EthernetSwitch {
            parameters:
                @display("p=190,224;i=device/switch");
        }
        router2: Router {
            parameters:
                @display("p=376,297;i=abstract/router");
        }
        router1: Router {
            parameters:
                @display("p=266,144;i=abstract/router");
        }
        server: StandardHost {
            parameters:
                @display("p=589,58;i=device/server_l");
        }
        configurator: Ipv4NetworkConfigurator {
            parameters:
                config = xml("<config><interface hosts='*' address='10.0.x.x' netmask='255.255.x.x'/></config>");
                @display("p=44,19;i=block/cogwheel_s");
        }
        host1: StandardHost {
            @display("p=54,310");
        }
        host2: StandardHost {
            @display("p=589,332");
        }
        switch2: EthernetSwitch {
            @display("p=473,224");
        }
    connections:
        client.ethg++ <--> line1 <--> switch.ethg++;
        router1.ethg++ <--> line1 <--> switch.ethg++;
        router1.ethg++ <--> line2 <--> router2.ethg++;
        switch2.ethg++ <--> line2 <--> router2.ethg++;
        switch2.ethg++ <--> line1 <--> server.ethg++;
        switch2.ethg++ <--> line1 <--> host2.ethg++;
        switch.ethg++ <--> line1 <--> host1.ethg++;
}
File: examples/voipstream/VoIPStreamTrafficTest/VoIPStreamTrafficTest.ned

This documentation is released under the Creative Commons license