Network InterfaceTableVisualizationAdvancedFeaturesShowcase

Package: inet.showcases.visualizer.interfacetable
File: showcases/visualizer/interfacetable/InterfaceTableVisualizationShowcase.ned

(no description)

StandardHost StandardHost EtherSwitch Router AccessPoint WirelessHost AdhocHost IPv4NetworkConfigurator IntegratedVisualizer Ieee80211ScalarRadioMedium

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Properties:

Name Value Description
isNetwork
display bgb=732,417

Unassigned submodule parameters:

Name Type Default value Description
host1.status.initialStatus string "UP"

TODO @signal, @statistic
host1.routingTable.forwarding bool
host1.routingTable.multicastForwarding bool
host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host1.pcapRecorder.verbose bool false

whether to log packets on the module output
host1.pcapRecorder.pcapFile string ""

the PCAP file to be written
host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
host1.lo0.lo.mtu int 4470B
host2.status.initialStatus string "UP"

TODO @signal, @statistic
host2.routingTable.forwarding bool
host2.routingTable.multicastForwarding bool
host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host2.pcapRecorder.verbose bool false

whether to log packets on the module output
host2.pcapRecorder.pcapFile string ""

the PCAP file to be written
host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
host2.lo0.lo.mtu int 4470B
switch.status.initialStatus string "UP"

TODO @signal, @statistic
switch.l2NodeConfigurator.interfaceTableModule string
switch.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator
switch.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
switch.macTable.agingTime double
switch.macTable.addressTableFile string
switch.stp.helloTime double
switch.stp.forwardDelay double
switch.stp.maxAge double
switch.stp.bridgePriority int
switch.stp.visualize bool
router.status.initialStatus string "UP"

TODO @signal, @statistic
router.routingTable.forwarding bool
router.routingTable.multicastForwarding bool
router.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router.pcapRecorder.verbose bool false

whether to log packets on the module output
router.pcapRecorder.pcapFile string ""

the PCAP file to be written
router.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router.lo0.lo.mtu int 4470B
router.bgp.interfaceTableModule string

The path to the InterfaceTable module
router.bgp.routingTableModule string
router.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router.bgp.dataTransferMode string
accessPoint.status.initialStatus string "UP"

TODO @signal, @statistic
accessPoint.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
accessPoint.macTable.agingTime double
accessPoint.macTable.addressTableFile string
wirelessHost.status.initialStatus string "UP"

TODO @signal, @statistic
wirelessHost.routingTable.forwarding bool
wirelessHost.routingTable.multicastForwarding bool
wirelessHost.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
wirelessHost.pcapRecorder.verbose bool false

whether to log packets on the module output
wirelessHost.pcapRecorder.pcapFile string ""

the PCAP file to be written
wirelessHost.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
wirelessHost.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
wirelessHost.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
wirelessHost.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
wirelessHost.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
wirelessHost.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
wirelessHost.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
wirelessHost.lo0.lo.mtu int 4470B
mobileHost.status.initialStatus string "UP"

TODO @signal, @statistic
mobileHost.routingTable.forwarding bool
mobileHost.routingTable.multicastForwarding bool
mobileHost.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
mobileHost.pcapRecorder.verbose bool false

whether to log packets on the module output
mobileHost.pcapRecorder.pcapFile string ""

the PCAP file to be written
mobileHost.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
mobileHost.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
mobileHost.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
mobileHost.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
mobileHost.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
mobileHost.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
mobileHost.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
mobileHost.lo0.lo.mtu int 4470B
configurator.minLinkWeight double 1E-3
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
radioMedium.neighborCache.refillPeriod double

Source code:

network InterfaceTableVisualizationAdvancedFeaturesShowcase
{
    @display("bgb=732,417");
    submodules:
        host1: StandardHost {
            @display("p=79,128");
        }
        host2: StandardHost {
            @display("p=80,218");
        }
        switch: EtherSwitch {
            @display("p=196,181");
        }
        router: Router {
            @display("p=304,182");
        }
        accessPoint: AccessPoint {
            @display("p=439,181");
        }
        wirelessHost: WirelessHost {
            @display("p=459,80");
        }
        mobileHost: AdhocHost {
            @display("p=468,313");
        }
        configurator: IPv4NetworkConfigurator {
            @display("p=631,50");
        }
        visualizer: IntegratedVisualizer {
            @display("p=631,122");
        }
        radioMedium: Ieee80211ScalarRadioMedium {
            @display("p=630,182;b=11,5");
        }
    connections:
        host1.ethg++ <--> Eth100M <--> switch.ethg++;
        host2.ethg++ <--> Eth100M <--> switch.ethg++;
        switch.ethg++ <--> Eth100M <--> router.ethg++;
        router.ethg++ <--> Eth100M <--> accessPoint.ethg++;
}

This documentation is released under the Creative Commons license