SensorNetworkShowcaseA

Package: inet.showcases.wireless.sensornetwork

SensorNetworkShowcaseA

network

(no description)

configurator : Ipv4NetworkConfigurator Assigns IPv4 addresses and sets up static routing for an IPv4 network. Source: configurator: Ipv4NetworkConfigurator { @display("p=3.4662657,4.033473"); } visualizer : IntegratedCanvasVisualizer Integrates all canvas visualizers into a single module. Source: visualizer: IntegratedCanvasVisualizer { @display("p=3.4662657,9.264383"); } radioMedium : RadioMedium The medium model describes the shared physical medium where communication takes place. Source: radioMedium: RadioMedium { @display("p=3.4032426,14.0541315"); } sensor4 : SensorNode A wireless sensor network (WSN) node with low-power communication capabilities. Source: sensor4: SensorNode { @display("p=22,6.5;i=misc/sensor2"); } sensor1 : SensorNode A wireless sensor network (WSN) node with low-power communication capabilities. Source: sensor1: SensorNode { @display("p=16.482326,20.196255;i=misc/sensor2"); } sensor2 : SensorNode A wireless sensor network (WSN) node with low-power communication capabilities. Source: sensor2: SensorNode { @display("p=33.772572,16.275303;i=misc/sensor2"); } sensor3 : SensorNode A wireless sensor network (WSN) node with low-power communication capabilities. Source: sensor3: SensorNode { @display("p=35,6.5;i=misc/sensor2"); } gateway : SensorNode A wireless sensor network (WSN) node with low-power communication capabilities. Source: gateway: SensorNode { @display("p=28.5,13;i=misc/sensorgateway"); } server : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: server: StandardHost { @display("p=38.35591,12.96182"); }

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork
display bgb=60,30;bgi=showcases/warehouse,s

Unassigned submodule parameters

Name Type Default value Description
configurator.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.updateRoutes bool false

Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology bool false

Print extracted network topology to the module output
configurator.dumpLinks bool false

Print recognized network links to the module output
configurator.dumpAddresses bool false

Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
visualizer.sceneVisualizer.visualizationTargetModule string
visualizer.sceneVisualizer.visualizationSubjectModule string
visualizer.physicalEnvironmentVisualizer.visualizationTargetModule string
visualizer.physicalEnvironmentVisualizer.visualizationSubjectModule string
visualizer.networkNodeVisualizer.visualizationTargetModule string
visualizer.networkNodeVisualizer.visualizationSubjectModule string
visualizer.networkConnectionVisualizer.visualizationTargetModule string
visualizer.networkConnectionVisualizer.visualizationSubjectModule string
visualizer.mobilityVisualizer.visualizationTargetModule string
visualizer.mobilityVisualizer.visualizationSubjectModule string
visualizer.statisticVisualizer.visualizationTargetModule string
visualizer.statisticVisualizer.visualizationSubjectModule string
visualizer.infoVisualizer.visualizationTargetModule string
visualizer.infoVisualizer.visualizationSubjectModule string
visualizer.energyStorageVisualizer.visualizationTargetModule string
visualizer.energyStorageVisualizer.visualizationSubjectModule string
visualizer.mediumVisualizer.visualizationTargetModule string
visualizer.mediumVisualizer.visualizationSubjectModule string
visualizer.obstacleLossVisualizer.visualizationTargetModule string
visualizer.obstacleLossVisualizer.visualizationSubjectModule string
visualizer.packetDropVisualizer.visualizationTargetModule string
visualizer.packetDropVisualizer.visualizationSubjectModule string
visualizer.packetFlowVisualizer.visualizationTargetModule string
visualizer.packetFlowVisualizer.visualizationSubjectModule string
visualizer.queueVisualizer.visualizationTargetModule string
visualizer.queueVisualizer.visualizationSubjectModule string
visualizer.gateScheduleVisualizer.visualizationTargetModule string
visualizer.gateScheduleVisualizer.visualizationSubjectModule string
visualizer.radioVisualizer.visualizationTargetModule string
visualizer.radioVisualizer.visualizationSubjectModule string
visualizer.physicalLinkVisualizer.visualizationTargetModule string
visualizer.physicalLinkVisualizer.visualizationSubjectModule string
visualizer.interfaceTableVisualizer.visualizationTargetModule string
visualizer.interfaceTableVisualizer.visualizationSubjectModule string
visualizer.dataLinkVisualizer.visualizationTargetModule string
visualizer.dataLinkVisualizer.visualizationSubjectModule string
visualizer.linkBreakVisualizer.visualizationTargetModule string
visualizer.linkBreakVisualizer.visualizationSubjectModule string
visualizer.ieee80211Visualizer.visualizationTargetModule string
visualizer.ieee80211Visualizer.visualizationSubjectModule string
visualizer.networkRouteVisualizer.visualizationTargetModule string
visualizer.networkRouteVisualizer.visualizationSubjectModule string
visualizer.routingTableVisualizer.visualizationTargetModule string
visualizer.routingTableVisualizer.visualizationSubjectModule string
visualizer.transportRouteVisualizer.visualizationTargetModule string
visualizer.transportRouteVisualizer.visualizationSubjectModule string
visualizer.transportConnectionVisualizer.visualizationTargetModule string
visualizer.transportConnectionVisualizer.visualizationSubjectModule string
visualizer.failureProtectionConfigurationVisualizer.visualizationTargetModule string
visualizer.failureProtectionConfigurationVisualizer.visualizationSubjectModule string
visualizer.streamRedundancyConfigurationVisualizer.visualizationTargetModule string
visualizer.streamRedundancyConfigurationVisualizer.visualizationSubjectModule string
radioMedium.neighborCache.refillPeriod double
sensor4.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.status.initialStatus string "UP"

TODO @signal, @statistic
sensor4.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.environment.initStage int 0

Initialization stage for the setup command
sensor4.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
sensor4.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
sensor4.environment.setupCommand string ""

A host OS system command
sensor4.environment.teardownCommand string ""

A host OS system command
sensor4.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.pcapRecorder.verbose bool true

Whether to log packets on the module output
sensor4.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
sensor4.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
sensor4.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
sensor4.pcapRecorder.fileFormat string "pcapng"
sensor4.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
sensor4.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
sensor4.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
sensor4.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
sensor4.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
sensor4.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
sensor4.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
sensor4.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
sensor4.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
sensor4.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
sensor4.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
sensor4.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor4.cb.forwardServiceRegistration bool true
sensor4.cb.forwardProtocolRegistration bool true
sensor4.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor4.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor4.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor4.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor4.bl.forwardServiceRegistration bool true
sensor4.bl.forwardProtocolRegistration bool true
sensor4.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor4.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor4.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor4.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.li.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor4.li.forwardServiceRegistration bool true
sensor4.li.forwardProtocolRegistration bool true
sensor4.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor4.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor4.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor4.eth.bitrate double
sensor4.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor4.nl.forwardServiceRegistration bool true
sensor4.nl.forwardProtocolRegistration bool true
sensor4.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor4.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor4.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor4.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor4.tn.forwardServiceRegistration bool true
sensor4.tn.forwardProtocolRegistration bool true
sensor4.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor4.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor4.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor4.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor4.at.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor4.at.forwardServiceRegistration bool true
sensor4.at.forwardProtocolRegistration bool true
sensor4.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor4.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor4.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor1.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.status.initialStatus string "UP"

TODO @signal, @statistic
sensor1.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.environment.initStage int 0

Initialization stage for the setup command
sensor1.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
sensor1.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
sensor1.environment.setupCommand string ""

A host OS system command
sensor1.environment.teardownCommand string ""

A host OS system command
sensor1.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.pcapRecorder.verbose bool true

Whether to log packets on the module output
sensor1.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
sensor1.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
sensor1.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
sensor1.pcapRecorder.fileFormat string "pcapng"
sensor1.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
sensor1.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
sensor1.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
sensor1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
sensor1.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
sensor1.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
sensor1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
sensor1.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
sensor1.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
sensor1.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
sensor1.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
sensor1.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor1.cb.forwardServiceRegistration bool true
sensor1.cb.forwardProtocolRegistration bool true
sensor1.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor1.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor1.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor1.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor1.bl.forwardServiceRegistration bool true
sensor1.bl.forwardProtocolRegistration bool true
sensor1.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor1.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor1.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor1.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.li.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor1.li.forwardServiceRegistration bool true
sensor1.li.forwardProtocolRegistration bool true
sensor1.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor1.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor1.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor1.eth.bitrate double
sensor1.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor1.nl.forwardServiceRegistration bool true
sensor1.nl.forwardProtocolRegistration bool true
sensor1.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor1.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor1.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor1.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor1.tn.forwardServiceRegistration bool true
sensor1.tn.forwardProtocolRegistration bool true
sensor1.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor1.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor1.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor1.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor1.at.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor1.at.forwardServiceRegistration bool true
sensor1.at.forwardProtocolRegistration bool true
sensor1.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor1.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor1.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.status.initialStatus string "UP"

TODO @signal, @statistic
sensor2.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.environment.initStage int 0

Initialization stage for the setup command
sensor2.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
sensor2.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
sensor2.environment.setupCommand string ""

A host OS system command
sensor2.environment.teardownCommand string ""

A host OS system command
sensor2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.pcapRecorder.verbose bool true

Whether to log packets on the module output
sensor2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
sensor2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
sensor2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
sensor2.pcapRecorder.fileFormat string "pcapng"
sensor2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
sensor2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
sensor2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
sensor2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
sensor2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
sensor2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
sensor2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
sensor2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
sensor2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
sensor2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
sensor2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
sensor2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor2.cb.forwardServiceRegistration bool true
sensor2.cb.forwardProtocolRegistration bool true
sensor2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor2.bl.forwardServiceRegistration bool true
sensor2.bl.forwardProtocolRegistration bool true
sensor2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor2.li.forwardServiceRegistration bool true
sensor2.li.forwardProtocolRegistration bool true
sensor2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor2.eth.bitrate double
sensor2.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor2.nl.forwardServiceRegistration bool true
sensor2.nl.forwardProtocolRegistration bool true
sensor2.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor2.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor2.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor2.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor2.tn.forwardServiceRegistration bool true
sensor2.tn.forwardProtocolRegistration bool true
sensor2.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor2.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor2.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor2.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor2.at.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor2.at.forwardServiceRegistration bool true
sensor2.at.forwardProtocolRegistration bool true
sensor2.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor2.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor2.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor3.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.status.initialStatus string "UP"

TODO @signal, @statistic
sensor3.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.environment.initStage int 0

Initialization stage for the setup command
sensor3.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
sensor3.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
sensor3.environment.setupCommand string ""

A host OS system command
sensor3.environment.teardownCommand string ""

A host OS system command
sensor3.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.pcapRecorder.verbose bool true

Whether to log packets on the module output
sensor3.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
sensor3.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
sensor3.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
sensor3.pcapRecorder.fileFormat string "pcapng"
sensor3.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
sensor3.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
sensor3.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
sensor3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
sensor3.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
sensor3.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
sensor3.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
sensor3.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
sensor3.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
sensor3.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
sensor3.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
sensor3.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor3.cb.forwardServiceRegistration bool true
sensor3.cb.forwardProtocolRegistration bool true
sensor3.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor3.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor3.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor3.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor3.bl.forwardServiceRegistration bool true
sensor3.bl.forwardProtocolRegistration bool true
sensor3.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor3.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor3.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor3.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.li.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor3.li.forwardServiceRegistration bool true
sensor3.li.forwardProtocolRegistration bool true
sensor3.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor3.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor3.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor3.eth.bitrate double
sensor3.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor3.nl.forwardServiceRegistration bool true
sensor3.nl.forwardProtocolRegistration bool true
sensor3.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor3.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor3.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor3.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor3.tn.forwardServiceRegistration bool true
sensor3.tn.forwardProtocolRegistration bool true
sensor3.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor3.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor3.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
sensor3.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sensor3.at.interfaceTableModule string

Module path to the ~InterfaceTable module
sensor3.at.forwardServiceRegistration bool true
sensor3.at.forwardProtocolRegistration bool true
sensor3.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
sensor3.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
sensor3.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
gateway.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.status.initialStatus string "UP"

TODO @signal, @statistic
gateway.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.environment.initStage int 0

Initialization stage for the setup command
gateway.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
gateway.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
gateway.environment.setupCommand string ""

A host OS system command
gateway.environment.teardownCommand string ""

A host OS system command
gateway.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.pcapRecorder.verbose bool true

Whether to log packets on the module output
gateway.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
gateway.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
gateway.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
gateway.pcapRecorder.fileFormat string "pcapng"
gateway.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
gateway.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
gateway.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
gateway.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
gateway.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
gateway.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
gateway.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
gateway.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
gateway.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
gateway.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
gateway.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
gateway.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
gateway.cb.forwardServiceRegistration bool true
gateway.cb.forwardProtocolRegistration bool true
gateway.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
gateway.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
gateway.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
gateway.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
gateway.bl.forwardServiceRegistration bool true
gateway.bl.forwardProtocolRegistration bool true
gateway.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
gateway.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
gateway.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
gateway.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.li.interfaceTableModule string

Module path to the ~InterfaceTable module
gateway.li.forwardServiceRegistration bool true
gateway.li.forwardProtocolRegistration bool true
gateway.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
gateway.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
gateway.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
gateway.eth.bitrate double
gateway.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
gateway.nl.forwardServiceRegistration bool true
gateway.nl.forwardProtocolRegistration bool true
gateway.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
gateway.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
gateway.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
gateway.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
gateway.tn.forwardServiceRegistration bool true
gateway.tn.forwardProtocolRegistration bool true
gateway.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
gateway.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
gateway.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
gateway.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
gateway.at.interfaceTableModule string

Module path to the ~InterfaceTable module
gateway.at.forwardServiceRegistration bool true
gateway.at.forwardProtocolRegistration bool true
gateway.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
gateway.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
gateway.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.status.initialStatus string "UP"

TODO @signal, @statistic
server.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.environment.initStage int 0

Initialization stage for the setup command
server.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
server.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
server.environment.setupCommand string ""

A host OS system command
server.environment.teardownCommand string ""

A host OS system command
server.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.pcapRecorder.verbose bool true

Whether to log packets on the module output
server.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
server.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
server.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
server.pcapRecorder.fileFormat string "pcapng"
server.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
server.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
server.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
server.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
server.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
server.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
server.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
server.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
server.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
server.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
server.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
server.cb.forwardServiceRegistration bool true
server.cb.forwardProtocolRegistration bool true
server.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
server.bl.forwardServiceRegistration bool true
server.bl.forwardProtocolRegistration bool true
server.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.li.interfaceTableModule string

Module path to the ~InterfaceTable module
server.li.forwardServiceRegistration bool true
server.li.forwardProtocolRegistration bool true
server.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.eth.bitrate double
server.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
server.nl.forwardServiceRegistration bool true
server.nl.forwardProtocolRegistration bool true
server.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
server.tn.forwardServiceRegistration bool true
server.tn.forwardProtocolRegistration bool true
server.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server.at.interfaceTableModule string

Module path to the ~InterfaceTable module
server.at.forwardServiceRegistration bool true
server.at.forwardProtocolRegistration bool true
server.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default

Source code

network SensorNetworkShowcaseA
{
    @display("bgb=60,30;bgi=showcases/warehouse,s");
    submodules:
        configurator: Ipv4NetworkConfigurator {
            @display("p=3.4662657,4.033473");
        }
        visualizer: IntegratedCanvasVisualizer {
            @display("p=3.4662657,9.264383");
        }
        radioMedium: RadioMedium {
            @display("p=3.4032426,14.0541315");
        }
        sensor4: SensorNode {
            @display("p=22,6.5;i=misc/sensor2");
        }
        sensor1: SensorNode {
            @display("p=16.482326,20.196255;i=misc/sensor2");
        }
        sensor2: SensorNode {
            @display("p=33.772572,16.275303;i=misc/sensor2");
        }
        sensor3: SensorNode {
            @display("p=35,6.5;i=misc/sensor2");
        }
        gateway: SensorNode {
            @display("p=28.5,13;i=misc/sensorgateway");
        }
        server: StandardHost {
            @display("p=38.35591,12.96182");
        }
    connections:
        gateway.ethg++ <--> Eth100M <--> server.ethg++;
}
File: showcases/wireless/sensornetwork/SensorNetworkShowcase.ned

This documentation is released under the Creative Commons license