DynamicTest

Package: inet.examples.rip.dynamictest

DynamicTest

network

(no description)

rtr : RoutingTableRecorder Records changes in the routing tables (~Ipv4RoutingTable) and interface tables (~InterfaceTable) of... Source: rtr: RoutingTableRecorder { @display("p=100,200;is=s"); } H1 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H1: StandardHost { parameters: @display("p=250,200"); gates: ethg[1]; } R1 : RipRouter A router that uses the Routing Information Protocol (RIP) version 2. Source: R1: RipRouter { parameters: @display("p=400,200"); gates: ethg[3]; } RA : RipRouter A router that uses the Routing Information Protocol (RIP) version 2. Source: RA: RipRouter { parameters: @display("p=550,100"); gates: ethg[2]; } RB : RipRouter A router that uses the Routing Information Protocol (RIP) version 2. Source: RB: RipRouter { parameters: @display("p=550,300"); gates: ethg[2]; } R2 : RipRouter A router that uses the Routing Information Protocol (RIP) version 2. Source: R2: RipRouter { parameters: @display("p=700,200"); gates: ethg[3]; } H2 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H2: StandardHost { parameters: @display("p=850,200"); gates: ethg[1]; } configurator : Ipv4NetworkConfigurator Assigns IPv4 addresses and sets up static routing for an IPv4 network. Source: configurator: Ipv4NetworkConfigurator { parameters: @display("p=100,100;is=s"); addStaticRoutes = false; config = xml("<config>" + "<interface among='H1 R1' address='192.168.1.x' netmask='255.255.255.x' />" + "<interface ... scenarioManager : ScenarioManager ~ScenarioManager is for setting up and controlling simulation experiments. Source: scenarioManager: ScenarioManager { @display("p=100,300;is=s"); }

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork
display p=10,10;b=712,152

Unassigned submodule parameters

Name Type Default value Description
rtr.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rtr.enabled bool true
rtr.logfile string "${resultdir}/${configname}-#${runnumber}.rt"
H1.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.status.initialStatus string "UP"

TODO @signal, @statistic
H1.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.environment.initStage int 0

Initialization stage for the setup command
H1.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H1.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H1.environment.setupCommand string ""

A host OS system command
H1.environment.teardownCommand string ""

A host OS system command
H1.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.pcapRecorder.verbose bool true

Whether to log packets on the module output
H1.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H1.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H1.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H1.pcapRecorder.fileFormat string "pcapng"
H1.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H1.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H1.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H1.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H1.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H1.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H1.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H1.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H1.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H1.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.cb.forwardServiceRegistration bool true
H1.cb.forwardProtocolRegistration bool true
H1.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.bl.forwardServiceRegistration bool true
H1.bl.forwardProtocolRegistration bool true
H1.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.li.forwardServiceRegistration bool true
H1.li.forwardProtocolRegistration bool true
H1.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.eth.bitrate double
H1.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.nl.forwardServiceRegistration bool true
H1.nl.forwardProtocolRegistration bool true
H1.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.tn.forwardServiceRegistration bool true
H1.tn.forwardProtocolRegistration bool true
H1.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.at.forwardServiceRegistration bool true
H1.at.forwardProtocolRegistration bool true
H1.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.status.initialStatus string "UP"

TODO @signal, @statistic
R1.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.environment.initStage int 0

Initialization stage for the setup command
R1.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
R1.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
R1.environment.setupCommand string ""

A host OS system command
R1.environment.teardownCommand string ""

A host OS system command
R1.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.pcapRecorder.verbose bool true

Whether to log packets on the module output
R1.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
R1.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
R1.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
R1.pcapRecorder.fileFormat string "pcapng"
R1.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
R1.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
R1.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
R1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
R1.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
R1.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
R1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
R1.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
R1.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
R1.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R1.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
R1.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.cb.forwardServiceRegistration bool true
R1.cb.forwardProtocolRegistration bool true
R1.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.bl.forwardServiceRegistration bool true
R1.bl.forwardProtocolRegistration bool true
R1.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.li.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.li.forwardServiceRegistration bool true
R1.li.forwardProtocolRegistration bool true
R1.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.eth.bitrate double
R1.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.nl.forwardServiceRegistration bool true
R1.nl.forwardProtocolRegistration bool true
R1.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.tn.forwardServiceRegistration bool true
R1.tn.forwardProtocolRegistration bool true
R1.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.at.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.at.forwardServiceRegistration bool true
R1.at.forwardProtocolRegistration bool true
R1.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.bgp.interfaceTableModule string

The path to the InterfaceTable module
R1.bgp.routingTableModule string
R1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RA.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.status.initialStatus string "UP"

TODO @signal, @statistic
RA.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.environment.initStage int 0

Initialization stage for the setup command
RA.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
RA.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
RA.environment.setupCommand string ""

A host OS system command
RA.environment.teardownCommand string ""

A host OS system command
RA.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.pcapRecorder.verbose bool true

Whether to log packets on the module output
RA.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
RA.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
RA.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
RA.pcapRecorder.fileFormat string "pcapng"
RA.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
RA.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
RA.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
RA.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
RA.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
RA.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
RA.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
RA.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
RA.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RA.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RA.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
RA.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
RA.cb.forwardServiceRegistration bool true
RA.cb.forwardProtocolRegistration bool true
RA.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RA.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RA.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RA.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
RA.bl.forwardServiceRegistration bool true
RA.bl.forwardProtocolRegistration bool true
RA.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RA.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RA.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RA.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.li.interfaceTableModule string

Module path to the ~InterfaceTable module
RA.li.forwardServiceRegistration bool true
RA.li.forwardProtocolRegistration bool true
RA.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RA.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RA.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RA.eth.bitrate double
RA.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
RA.nl.forwardServiceRegistration bool true
RA.nl.forwardProtocolRegistration bool true
RA.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RA.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RA.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RA.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
RA.tn.forwardServiceRegistration bool true
RA.tn.forwardProtocolRegistration bool true
RA.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RA.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RA.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RA.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RA.at.interfaceTableModule string

Module path to the ~InterfaceTable module
RA.at.forwardServiceRegistration bool true
RA.at.forwardProtocolRegistration bool true
RA.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RA.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RA.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RA.bgp.interfaceTableModule string

The path to the InterfaceTable module
RA.bgp.routingTableModule string
RA.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RB.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.status.initialStatus string "UP"

TODO @signal, @statistic
RB.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.environment.initStage int 0

Initialization stage for the setup command
RB.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
RB.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
RB.environment.setupCommand string ""

A host OS system command
RB.environment.teardownCommand string ""

A host OS system command
RB.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.pcapRecorder.verbose bool true

Whether to log packets on the module output
RB.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
RB.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
RB.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
RB.pcapRecorder.fileFormat string "pcapng"
RB.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
RB.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
RB.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
RB.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
RB.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
RB.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
RB.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
RB.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
RB.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RB.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RB.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
RB.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
RB.cb.forwardServiceRegistration bool true
RB.cb.forwardProtocolRegistration bool true
RB.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RB.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RB.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RB.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
RB.bl.forwardServiceRegistration bool true
RB.bl.forwardProtocolRegistration bool true
RB.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RB.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RB.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RB.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.li.interfaceTableModule string

Module path to the ~InterfaceTable module
RB.li.forwardServiceRegistration bool true
RB.li.forwardProtocolRegistration bool true
RB.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RB.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RB.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RB.eth.bitrate double
RB.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
RB.nl.forwardServiceRegistration bool true
RB.nl.forwardProtocolRegistration bool true
RB.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RB.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RB.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RB.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
RB.tn.forwardServiceRegistration bool true
RB.tn.forwardProtocolRegistration bool true
RB.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RB.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RB.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RB.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
RB.at.interfaceTableModule string

Module path to the ~InterfaceTable module
RB.at.forwardServiceRegistration bool true
RB.at.forwardProtocolRegistration bool true
RB.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
RB.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
RB.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
RB.bgp.interfaceTableModule string

The path to the InterfaceTable module
RB.bgp.routingTableModule string
RB.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
R2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.status.initialStatus string "UP"

TODO @signal, @statistic
R2.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.environment.initStage int 0

Initialization stage for the setup command
R2.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
R2.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
R2.environment.setupCommand string ""

A host OS system command
R2.environment.teardownCommand string ""

A host OS system command
R2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.pcapRecorder.verbose bool true

Whether to log packets on the module output
R2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
R2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
R2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
R2.pcapRecorder.fileFormat string "pcapng"
R2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
R2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
R2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
R2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
R2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
R2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
R2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
R2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
R2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
R2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
R2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.cb.forwardServiceRegistration bool true
R2.cb.forwardProtocolRegistration bool true
R2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.bl.forwardServiceRegistration bool true
R2.bl.forwardProtocolRegistration bool true
R2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.li.forwardServiceRegistration bool true
R2.li.forwardProtocolRegistration bool true
R2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.eth.bitrate double
R2.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.nl.forwardServiceRegistration bool true
R2.nl.forwardProtocolRegistration bool true
R2.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.tn.forwardServiceRegistration bool true
R2.tn.forwardProtocolRegistration bool true
R2.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.at.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.at.forwardServiceRegistration bool true
R2.at.forwardProtocolRegistration bool true
R2.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.bgp.interfaceTableModule string

The path to the InterfaceTable module
R2.bgp.routingTableModule string
R2.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
H2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.status.initialStatus string "UP"

TODO @signal, @statistic
H2.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.environment.initStage int 0

Initialization stage for the setup command
H2.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H2.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H2.environment.setupCommand string ""

A host OS system command
H2.environment.teardownCommand string ""

A host OS system command
H2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.pcapRecorder.verbose bool true

Whether to log packets on the module output
H2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H2.pcapRecorder.fileFormat string "pcapng"
H2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.cb.forwardServiceRegistration bool true
H2.cb.forwardProtocolRegistration bool true
H2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.bl.forwardServiceRegistration bool true
H2.bl.forwardProtocolRegistration bool true
H2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.li.forwardServiceRegistration bool true
H2.li.forwardProtocolRegistration bool true
H2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.eth.bitrate double
H2.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.nl.forwardServiceRegistration bool true
H2.nl.forwardProtocolRegistration bool true
H2.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.tn.forwardServiceRegistration bool true
H2.tn.forwardProtocolRegistration bool true
H2.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.at.forwardServiceRegistration bool true
H2.at.forwardProtocolRegistration bool true
H2.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
configurator.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.assignAddresses bool true

Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addDefaultRoutes bool true

Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.updateRoutes bool false

Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology bool false

Print extracted network topology to the module output
configurator.dumpLinks bool false

Print recognized network links to the module output
configurator.dumpAddresses bool false

Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
scenarioManager.displayStringTextFormat string "total %c changes, %l left\nnext at: %t"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
scenarioManager.script xml xml("")

Source code

network DynamicTest
{
    parameters:
        @display("p=10,10;b=712,152");
    types:
        channel C extends ThruputMeteringChannel
        {
            delay = 0.1us;
            datarate = 100Mbps;
            thruputDisplayFormat = "#N";
        }
    submodules:
        rtr: RoutingTableRecorder {
            @display("p=100,200;is=s");
        }
        H1: StandardHost {
            parameters:
                @display("p=250,200");
            gates:
                ethg[1];
        }
        R1: RipRouter {
            parameters:
                @display("p=400,200");
            gates:
                ethg[3];
        }
        RA: RipRouter {
            parameters:
                @display("p=550,100");
            gates:
                ethg[2];
        }
        RB: RipRouter {
            parameters:
                @display("p=550,300");
            gates:
                ethg[2];
        }
        R2: RipRouter {
            parameters:
                @display("p=700,200");
            gates:
                ethg[3];
        }
        H2: StandardHost {
            parameters:
                @display("p=850,200");
            gates:
                ethg[1];
        }
        configurator: Ipv4NetworkConfigurator {
            parameters:
                @display("p=100,100;is=s");
                addStaticRoutes = false;
                config = xml("<config>"
                        + "<interface among='H1 R1' address='192.168.1.x' netmask='255.255.255.x' />"
                        + "<interface among='H2 R2' address='192.168.2.x' netmask='255.255.255.x' />"
                        + "<interface among='R*' address='10.0.0.x' netmask='255.255.255.x' />"
                        + "<route hosts='H1' destination='*' gateway='R1'/>"
                        + "<route hosts='H2' destination='*' gateway='R2'/>"
                        + "<route hosts='R*' destination='224.0.0.0' netmask='240.0.0.0' interface='eth0'/>"
                        + "<route hosts='R*' destination='224.0.0.0' netmask='240.0.0.0' interface='eth1'/>"
                        + "<route hosts='R1 R2' destination='224.0.0.0' netmask='240.0.0.0' interface='eth2'/>"
                        + "</config>");
        }
        scenarioManager: ScenarioManager {
            @display("p=100,300;is=s");
        }
    connections:
        H1.ethg[0] <--> C <--> R1.ethg[0];
        R1.ethg[1] <--> C <--> RA.ethg[0];
        R1.ethg[2] <--> C <--> RB.ethg[0];
        RA.ethg[1] <--> C <--> R2.ethg[1];
        RB.ethg[1] <--> C <--> R2.ethg[2];
        R2.ethg[0] <--> C <--> H2.ethg[0];
}
File: examples/rip/dynamictest/DynamicTest.ned

This documentation is released under the Creative Commons license