FlatNet

Package: inet.examples.inet.flatnet

FlatNet

network

(no description)

configurator : Ipv4NetworkConfigurator Assigns IPv4 addresses and sets up static routing for an IPv4 network. Source: configurator: Ipv4NetworkConfigurator { parameters: config = xml("<config><interface hosts='*' address='192.168.x.x' netmask='255.255.x.x'/></config>"); @display("p=100,100;is=s"); } rte[57] : Router A network router device with support for multiple routing protocols and network interfaces. Source: rte[57]: Router; cli[2] : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: cli[2]: StandardHost { parameters: @display("i=device/laptop"); } srv : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: srv: StandardHost { parameters: @display("i=device/server"); }

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork

Unassigned submodule parameters

Name Type Default value Description
configurator.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.assignAddresses bool true

Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.updateRoutes bool false

Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology bool false

Print extracted network topology to the module output
configurator.dumpLinks bool false

Print recognized network links to the module output
configurator.dumpAddresses bool false

Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
rte.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.status.initialStatus string "UP"

TODO @signal, @statistic
rte.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.environment.initStage int 0

Initialization stage for the setup command
rte.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
rte.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
rte.environment.setupCommand string ""

A host OS system command
rte.environment.teardownCommand string ""

A host OS system command
rte.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.pcapRecorder.verbose bool true

Whether to log packets on the module output
rte.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
rte.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
rte.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
rte.pcapRecorder.fileFormat string "pcapng"
rte.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
rte.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
rte.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
rte.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
rte.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
rte.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
rte.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
rte.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
rte.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
rte.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
rte.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
rte.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
rte.cb.forwardServiceRegistration bool true
rte.cb.forwardProtocolRegistration bool true
rte.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
rte.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
rte.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
rte.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
rte.bl.forwardServiceRegistration bool true
rte.bl.forwardProtocolRegistration bool true
rte.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
rte.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
rte.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
rte.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.li.interfaceTableModule string

Module path to the ~InterfaceTable module
rte.li.forwardServiceRegistration bool true
rte.li.forwardProtocolRegistration bool true
rte.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
rte.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
rte.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
rte.eth.bitrate double
rte.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
rte.nl.forwardServiceRegistration bool true
rte.nl.forwardProtocolRegistration bool true
rte.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
rte.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
rte.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
rte.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
rte.tn.forwardServiceRegistration bool true
rte.tn.forwardProtocolRegistration bool true
rte.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
rte.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
rte.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
rte.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
rte.at.interfaceTableModule string

Module path to the ~InterfaceTable module
rte.at.forwardServiceRegistration bool true
rte.at.forwardProtocolRegistration bool true
rte.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
rte.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
rte.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
rte.bgp.interfaceTableModule string

The path to the InterfaceTable module
rte.bgp.routingTableModule string
rte.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
cli.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.status.initialStatus string "UP"

TODO @signal, @statistic
cli.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.environment.initStage int 0

Initialization stage for the setup command
cli.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
cli.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
cli.environment.setupCommand string ""

A host OS system command
cli.environment.teardownCommand string ""

A host OS system command
cli.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.pcapRecorder.verbose bool true

Whether to log packets on the module output
cli.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
cli.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
cli.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
cli.pcapRecorder.fileFormat string "pcapng"
cli.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
cli.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
cli.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
cli.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
cli.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
cli.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
cli.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
cli.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
cli.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
cli.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
cli.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
cli.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
cli.cb.forwardServiceRegistration bool true
cli.cb.forwardProtocolRegistration bool true
cli.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
cli.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
cli.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
cli.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
cli.bl.forwardServiceRegistration bool true
cli.bl.forwardProtocolRegistration bool true
cli.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
cli.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
cli.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
cli.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.li.interfaceTableModule string

Module path to the ~InterfaceTable module
cli.li.forwardServiceRegistration bool true
cli.li.forwardProtocolRegistration bool true
cli.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
cli.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
cli.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
cli.eth.bitrate double
cli.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
cli.nl.forwardServiceRegistration bool true
cli.nl.forwardProtocolRegistration bool true
cli.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
cli.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
cli.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
cli.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
cli.tn.forwardServiceRegistration bool true
cli.tn.forwardProtocolRegistration bool true
cli.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
cli.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
cli.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
cli.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.at.interfaceTableModule string

Module path to the ~InterfaceTable module
cli.at.forwardServiceRegistration bool true
cli.at.forwardProtocolRegistration bool true
cli.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
cli.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
cli.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
srv.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.status.initialStatus string "UP"

TODO @signal, @statistic
srv.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.environment.initStage int 0

Initialization stage for the setup command
srv.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
srv.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
srv.environment.setupCommand string ""

A host OS system command
srv.environment.teardownCommand string ""

A host OS system command
srv.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.pcapRecorder.verbose bool true

Whether to log packets on the module output
srv.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
srv.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
srv.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
srv.pcapRecorder.fileFormat string "pcapng"
srv.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
srv.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
srv.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
srv.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
srv.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
srv.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
srv.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
srv.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
srv.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
srv.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
srv.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
srv.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
srv.cb.forwardServiceRegistration bool true
srv.cb.forwardProtocolRegistration bool true
srv.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
srv.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
srv.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
srv.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
srv.bl.forwardServiceRegistration bool true
srv.bl.forwardProtocolRegistration bool true
srv.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
srv.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
srv.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
srv.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.li.interfaceTableModule string

Module path to the ~InterfaceTable module
srv.li.forwardServiceRegistration bool true
srv.li.forwardProtocolRegistration bool true
srv.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
srv.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
srv.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
srv.eth.bitrate double
srv.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
srv.nl.forwardServiceRegistration bool true
srv.nl.forwardProtocolRegistration bool true
srv.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
srv.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
srv.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
srv.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
srv.tn.forwardServiceRegistration bool true
srv.tn.forwardProtocolRegistration bool true
srv.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
srv.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
srv.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
srv.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
srv.at.interfaceTableModule string

Module path to the ~InterfaceTable module
srv.at.forwardServiceRegistration bool true
srv.at.forwardProtocolRegistration bool true
srv.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
srv.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
srv.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default

Source code

network FlatNet
{
    types:
        channel fiberline extends DatarateChannel
        {
            delay = 1us;
            datarate = 512Mbps;
        }
        channel ethernetline extends DatarateChannel
        {
            delay = 0.1us;
            datarate = 10Mbps;
        }
    submodules:
        configurator: Ipv4NetworkConfigurator {
            parameters:
                config = xml("<config><interface hosts='*' address='192.168.x.x' netmask='255.255.x.x'/></config>");
                @display("p=100,100;is=s");
        }
        rte[57]: Router;
        cli[2]: StandardHost {
            parameters:
                @display("i=device/laptop");
        }
        srv: StandardHost {
            parameters:
                @display("i=device/server");
        }
    connections:
        cli[0].pppg++ <--> ethernetline <--> rte[50].pppg++;
        cli[1].pppg++ <--> ethernetline <--> rte[8].pppg++;
        srv.pppg++ <--> fiberline <--> rte[18].pppg++;
        rte[0].pppg++ <--> fiberline <--> rte[1].pppg++;
        rte[1].pppg++ <--> fiberline <--> rte[2].pppg++;
        rte[1].pppg++ <--> fiberline <--> rte[4].pppg++;
        rte[3].pppg++ <--> fiberline <--> rte[4].pppg++;
        rte[4].pppg++ <--> fiberline <--> rte[5].pppg++;
        rte[4].pppg++ <--> fiberline <--> rte[7].pppg++;
        rte[5].pppg++ <--> fiberline <--> rte[6].pppg++;
        rte[5].pppg++ <--> fiberline <--> rte[10].pppg++;
        rte[6].pppg++ <--> fiberline <--> rte[7].pppg++;
        rte[6].pppg++ <--> fiberline <--> rte[9].pppg++;
        rte[7].pppg++ <--> fiberline <--> rte[8].pppg++;
        rte[7].pppg++ <--> fiberline <--> rte[12].pppg++;
        rte[9].pppg++ <--> fiberline <--> rte[11].pppg++;
        rte[10].pppg++ <--> fiberline <--> rte[11].pppg++;
        rte[10].pppg++ <--> fiberline <--> rte[13].pppg++;
        rte[11].pppg++ <--> fiberline <--> rte[12].pppg++;
        rte[11].pppg++ <--> fiberline <--> rte[14].pppg++;
        rte[12].pppg++ <--> fiberline <--> rte[15].pppg++;
        rte[13].pppg++ <--> fiberline <--> rte[18].pppg++;
        rte[14].pppg++ <--> fiberline <--> rte[15].pppg++;
        rte[14].pppg++ <--> fiberline <--> rte[22].pppg++;
        rte[15].pppg++ <--> fiberline <--> rte[16].pppg++;
        rte[16].pppg++ <--> fiberline <--> rte[17].pppg++;
        rte[16].pppg++ <--> fiberline <--> rte[23].pppg++;
        rte[18].pppg++ <--> fiberline <--> rte[19].pppg++;
        rte[18].pppg++ <--> fiberline <--> rte[21].pppg++;
        rte[19].pppg++ <--> fiberline <--> rte[20].pppg++;
        rte[19].pppg++ <--> fiberline <--> rte[26].pppg++;
        rte[20].pppg++ <--> fiberline <--> rte[21].pppg++;
        rte[20].pppg++ <--> fiberline <--> rte[24].pppg++;
        rte[20].pppg++ <--> fiberline <--> rte[25].pppg++;
        rte[21].pppg++ <--> fiberline <--> rte[22].pppg++;
        rte[21].pppg++ <--> fiberline <--> rte[23].pppg++;
        rte[21].pppg++ <--> fiberline <--> rte[24].pppg++;
        rte[23].pppg++ <--> fiberline <--> rte[24].pppg++;
        rte[24].pppg++ <--> fiberline <--> rte[28].pppg++;
        rte[25].pppg++ <--> fiberline <--> rte[27].pppg++;
        rte[26].pppg++ <--> fiberline <--> rte[32].pppg++;
        rte[27].pppg++ <--> fiberline <--> rte[29].pppg++;
        rte[27].pppg++ <--> fiberline <--> rte[30].pppg++;
        rte[27].pppg++ <--> fiberline <--> rte[32].pppg++;
        rte[28].pppg++ <--> fiberline <--> rte[29].pppg++;
        rte[28].pppg++ <--> fiberline <--> rte[31].pppg++;
        rte[29].pppg++ <--> fiberline <--> rte[31].pppg++;
        rte[30].pppg++ <--> fiberline <--> rte[36].pppg++;
        rte[31].pppg++ <--> fiberline <--> rte[33].pppg++;
        rte[32].pppg++ <--> fiberline <--> rte[34].pppg++;
        rte[33].pppg++ <--> fiberline <--> rte[37].pppg++;
        rte[34].pppg++ <--> fiberline <--> rte[35].pppg++;
        rte[34].pppg++ <--> fiberline <--> rte[40].pppg++;
        rte[35].pppg++ <--> fiberline <--> rte[36].pppg++;
        rte[35].pppg++ <--> fiberline <--> rte[39].pppg++;
        rte[36].pppg++ <--> fiberline <--> rte[37].pppg++;
        rte[37].pppg++ <--> fiberline <--> rte[38].pppg++;
        rte[38].pppg++ <--> fiberline <--> rte[39].pppg++;
        rte[38].pppg++ <--> fiberline <--> rte[42].pppg++;
        rte[39].pppg++ <--> fiberline <--> rte[40].pppg++;
        rte[39].pppg++ <--> fiberline <--> rte[41].pppg++;
        rte[40].pppg++ <--> fiberline <--> rte[43].pppg++;
        rte[40].pppg++ <--> fiberline <--> rte[44].pppg++;
        rte[40].pppg++ <--> fiberline <--> rte[52].pppg++;
        rte[41].pppg++ <--> fiberline <--> rte[42].pppg++;
        rte[41].pppg++ <--> fiberline <--> rte[43].pppg++;
        rte[42].pppg++ <--> fiberline <--> rte[43].pppg++;
        rte[43].pppg++ <--> fiberline <--> rte[46].pppg++;
        rte[44].pppg++ <--> fiberline <--> rte[45].pppg++;
        rte[44].pppg++ <--> fiberline <--> rte[47].pppg++;
        rte[45].pppg++ <--> fiberline <--> rte[46].pppg++;
        rte[46].pppg++ <--> fiberline <--> rte[49].pppg++;
        rte[47].pppg++ <--> fiberline <--> rte[48].pppg++;
        rte[48].pppg++ <--> fiberline <--> rte[50].pppg++;
        rte[48].pppg++ <--> fiberline <--> rte[51].pppg++;
        rte[49].pppg++ <--> fiberline <--> rte[50].pppg++;
        rte[50].pppg++ <--> fiberline <--> rte[53].pppg++;
        rte[51].pppg++ <--> fiberline <--> rte[52].pppg++;
        rte[51].pppg++ <--> fiberline <--> rte[53].pppg++;
        rte[52].pppg++ <--> fiberline <--> rte[53].pppg++;
        rte[52].pppg++ <--> fiberline <--> rte[54].pppg++;
        rte[53].pppg++ <--> fiberline <--> rte[56].pppg++;
        rte[54].pppg++ <--> fiberline <--> rte[55].pppg++;
        rte[55].pppg++ <--> fiberline <--> rte[56].pppg++;
}
File: examples/inet/flatnet/FlatNet.ned

This documentation is released under the Creative Commons license