DiffservNetwork

Package: inet.examples.diffserv.onedomain

DiffservNetwork

network

(no description)

H1 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H1: StandardHost { @display("p=250,100"); } H2 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H2: StandardHost { @display("p=250,200"); } R4 : Router A network router device with support for multiple routing protocols and network interfaces. Source: R4: Router { @display("p=850,150"); } R2 : Router A network router device with support for multiple routing protocols and network interfaces. Source: R2: Router { @display("p=550,250"); } R1 : Router A network router device with support for multiple routing protocols and network interfaces. Source: R1: Router { @display("p=400,350"); } R3 : Router A network router device with support for multiple routing protocols and network interfaces. Source: R3: Router { @display("p=700,250"); } R5 : Router A network router device with support for multiple routing protocols and network interfaces. Source: R5: Router { @display("p=850,350"); } R0 : Router A network router device with support for multiple routing protocols and network interfaces. Source: R0: Router { @display("p=400,150"); } H5 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H5: StandardHost { @display("p=1000,100"); } H6 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H6: StandardHost { @display("p=1000,200"); } H7 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H7: StandardHost { @display("p=1000,300"); } H8 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H8: StandardHost { @display("p=1000,400"); } H3 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H3: StandardHost { @display("p=250,300"); } H4 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: H4: StandardHost { @display("p=250,400"); } configurator : Ipv4NetworkConfigurator Assigns IPv4 addresses and sets up static routing for an IPv4 network. Source: configurator: Ipv4NetworkConfigurator { @display("p=100,100;is=s"); }

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Parameters

Name Type Default value Description
edgeDatarate double
coreDatarate double

Properties

Name Value Description
isNetwork

Unassigned submodule parameters

Name Type Default value Description
H1.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.status.initialStatus string "UP"

TODO @signal, @statistic
H1.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.environment.initStage int 0

Initialization stage for the setup command
H1.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H1.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H1.environment.setupCommand string ""

A host OS system command
H1.environment.teardownCommand string ""

A host OS system command
H1.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.pcapRecorder.verbose bool true

Whether to log packets on the module output
H1.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H1.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H1.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H1.pcapRecorder.fileFormat string "pcapng"
H1.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H1.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H1.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H1.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H1.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H1.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H1.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H1.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H1.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H1.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.cb.forwardServiceRegistration bool true
H1.cb.forwardProtocolRegistration bool true
H1.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.bl.forwardServiceRegistration bool true
H1.bl.forwardProtocolRegistration bool true
H1.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.li.forwardServiceRegistration bool true
H1.li.forwardProtocolRegistration bool true
H1.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.eth.bitrate double
H1.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.nl.forwardServiceRegistration bool true
H1.nl.forwardProtocolRegistration bool true
H1.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.tn.forwardServiceRegistration bool true
H1.tn.forwardProtocolRegistration bool true
H1.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H1.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H1.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H1.at.forwardServiceRegistration bool true
H1.at.forwardProtocolRegistration bool true
H1.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H1.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H1.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.status.initialStatus string "UP"

TODO @signal, @statistic
H2.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.environment.initStage int 0

Initialization stage for the setup command
H2.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H2.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H2.environment.setupCommand string ""

A host OS system command
H2.environment.teardownCommand string ""

A host OS system command
H2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.pcapRecorder.verbose bool true

Whether to log packets on the module output
H2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H2.pcapRecorder.fileFormat string "pcapng"
H2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.cb.forwardServiceRegistration bool true
H2.cb.forwardProtocolRegistration bool true
H2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.bl.forwardServiceRegistration bool true
H2.bl.forwardProtocolRegistration bool true
H2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.li.forwardServiceRegistration bool true
H2.li.forwardProtocolRegistration bool true
H2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.eth.bitrate double
H2.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.nl.forwardServiceRegistration bool true
H2.nl.forwardProtocolRegistration bool true
H2.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.tn.forwardServiceRegistration bool true
H2.tn.forwardProtocolRegistration bool true
H2.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H2.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H2.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H2.at.forwardServiceRegistration bool true
H2.at.forwardProtocolRegistration bool true
H2.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H2.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H2.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R4.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.status.initialStatus string "UP"

TODO @signal, @statistic
R4.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.environment.initStage int 0

Initialization stage for the setup command
R4.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
R4.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
R4.environment.setupCommand string ""

A host OS system command
R4.environment.teardownCommand string ""

A host OS system command
R4.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.pcapRecorder.verbose bool true

Whether to log packets on the module output
R4.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
R4.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
R4.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
R4.pcapRecorder.fileFormat string "pcapng"
R4.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
R4.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
R4.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
R4.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
R4.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
R4.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
R4.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
R4.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
R4.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
R4.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R4.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
R4.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
R4.cb.forwardServiceRegistration bool true
R4.cb.forwardProtocolRegistration bool true
R4.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R4.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R4.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R4.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
R4.bl.forwardServiceRegistration bool true
R4.bl.forwardProtocolRegistration bool true
R4.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R4.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R4.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R4.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.li.interfaceTableModule string

Module path to the ~InterfaceTable module
R4.li.forwardServiceRegistration bool true
R4.li.forwardProtocolRegistration bool true
R4.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R4.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R4.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R4.eth.bitrate double
R4.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
R4.nl.forwardServiceRegistration bool true
R4.nl.forwardProtocolRegistration bool true
R4.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R4.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R4.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R4.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
R4.tn.forwardServiceRegistration bool true
R4.tn.forwardProtocolRegistration bool true
R4.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R4.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R4.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R4.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R4.at.interfaceTableModule string

Module path to the ~InterfaceTable module
R4.at.forwardServiceRegistration bool true
R4.at.forwardProtocolRegistration bool true
R4.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R4.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R4.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R4.bgp.interfaceTableModule string

The path to the InterfaceTable module
R4.bgp.routingTableModule string
R4.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
R2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.status.initialStatus string "UP"

TODO @signal, @statistic
R2.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.environment.initStage int 0

Initialization stage for the setup command
R2.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
R2.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
R2.environment.setupCommand string ""

A host OS system command
R2.environment.teardownCommand string ""

A host OS system command
R2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.pcapRecorder.verbose bool true

Whether to log packets on the module output
R2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
R2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
R2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
R2.pcapRecorder.fileFormat string "pcapng"
R2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
R2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
R2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
R2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
R2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
R2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
R2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
R2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
R2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
R2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
R2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.cb.forwardServiceRegistration bool true
R2.cb.forwardProtocolRegistration bool true
R2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.bl.forwardServiceRegistration bool true
R2.bl.forwardProtocolRegistration bool true
R2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.li.forwardServiceRegistration bool true
R2.li.forwardProtocolRegistration bool true
R2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.eth.bitrate double
R2.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.nl.forwardServiceRegistration bool true
R2.nl.forwardProtocolRegistration bool true
R2.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.tn.forwardServiceRegistration bool true
R2.tn.forwardProtocolRegistration bool true
R2.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R2.at.interfaceTableModule string

Module path to the ~InterfaceTable module
R2.at.forwardServiceRegistration bool true
R2.at.forwardProtocolRegistration bool true
R2.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R2.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R2.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R2.bgp.interfaceTableModule string

The path to the InterfaceTable module
R2.bgp.routingTableModule string
R2.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
R1.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.status.initialStatus string "UP"

TODO @signal, @statistic
R1.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.environment.initStage int 0

Initialization stage for the setup command
R1.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
R1.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
R1.environment.setupCommand string ""

A host OS system command
R1.environment.teardownCommand string ""

A host OS system command
R1.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.pcapRecorder.verbose bool true

Whether to log packets on the module output
R1.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
R1.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
R1.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
R1.pcapRecorder.fileFormat string "pcapng"
R1.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
R1.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
R1.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
R1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
R1.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
R1.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
R1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
R1.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
R1.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
R1.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R1.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
R1.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.cb.forwardServiceRegistration bool true
R1.cb.forwardProtocolRegistration bool true
R1.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.bl.forwardServiceRegistration bool true
R1.bl.forwardProtocolRegistration bool true
R1.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.li.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.li.forwardServiceRegistration bool true
R1.li.forwardProtocolRegistration bool true
R1.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.eth.bitrate double
R1.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.nl.forwardServiceRegistration bool true
R1.nl.forwardProtocolRegistration bool true
R1.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.tn.forwardServiceRegistration bool true
R1.tn.forwardProtocolRegistration bool true
R1.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R1.at.interfaceTableModule string

Module path to the ~InterfaceTable module
R1.at.forwardServiceRegistration bool true
R1.at.forwardProtocolRegistration bool true
R1.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R1.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R1.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R1.bgp.interfaceTableModule string

The path to the InterfaceTable module
R1.bgp.routingTableModule string
R1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
R3.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.status.initialStatus string "UP"

TODO @signal, @statistic
R3.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.environment.initStage int 0

Initialization stage for the setup command
R3.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
R3.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
R3.environment.setupCommand string ""

A host OS system command
R3.environment.teardownCommand string ""

A host OS system command
R3.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.pcapRecorder.verbose bool true

Whether to log packets on the module output
R3.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
R3.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
R3.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
R3.pcapRecorder.fileFormat string "pcapng"
R3.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
R3.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
R3.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
R3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
R3.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
R3.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
R3.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
R3.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
R3.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
R3.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R3.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
R3.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
R3.cb.forwardServiceRegistration bool true
R3.cb.forwardProtocolRegistration bool true
R3.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R3.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R3.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R3.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
R3.bl.forwardServiceRegistration bool true
R3.bl.forwardProtocolRegistration bool true
R3.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R3.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R3.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R3.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.li.interfaceTableModule string

Module path to the ~InterfaceTable module
R3.li.forwardServiceRegistration bool true
R3.li.forwardProtocolRegistration bool true
R3.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R3.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R3.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R3.eth.bitrate double
R3.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
R3.nl.forwardServiceRegistration bool true
R3.nl.forwardProtocolRegistration bool true
R3.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R3.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R3.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R3.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
R3.tn.forwardServiceRegistration bool true
R3.tn.forwardProtocolRegistration bool true
R3.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R3.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R3.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R3.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R3.at.interfaceTableModule string

Module path to the ~InterfaceTable module
R3.at.forwardServiceRegistration bool true
R3.at.forwardProtocolRegistration bool true
R3.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R3.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R3.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R3.bgp.interfaceTableModule string

The path to the InterfaceTable module
R3.bgp.routingTableModule string
R3.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
R5.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.status.initialStatus string "UP"

TODO @signal, @statistic
R5.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.environment.initStage int 0

Initialization stage for the setup command
R5.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
R5.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
R5.environment.setupCommand string ""

A host OS system command
R5.environment.teardownCommand string ""

A host OS system command
R5.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.pcapRecorder.verbose bool true

Whether to log packets on the module output
R5.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
R5.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
R5.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
R5.pcapRecorder.fileFormat string "pcapng"
R5.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
R5.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
R5.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
R5.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
R5.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
R5.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
R5.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
R5.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
R5.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
R5.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R5.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
R5.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
R5.cb.forwardServiceRegistration bool true
R5.cb.forwardProtocolRegistration bool true
R5.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R5.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R5.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R5.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
R5.bl.forwardServiceRegistration bool true
R5.bl.forwardProtocolRegistration bool true
R5.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R5.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R5.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R5.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.li.interfaceTableModule string

Module path to the ~InterfaceTable module
R5.li.forwardServiceRegistration bool true
R5.li.forwardProtocolRegistration bool true
R5.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R5.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R5.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R5.eth.bitrate double
R5.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
R5.nl.forwardServiceRegistration bool true
R5.nl.forwardProtocolRegistration bool true
R5.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R5.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R5.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R5.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
R5.tn.forwardServiceRegistration bool true
R5.tn.forwardProtocolRegistration bool true
R5.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R5.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R5.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R5.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R5.at.interfaceTableModule string

Module path to the ~InterfaceTable module
R5.at.forwardServiceRegistration bool true
R5.at.forwardProtocolRegistration bool true
R5.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R5.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R5.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R5.bgp.interfaceTableModule string

The path to the InterfaceTable module
R5.bgp.routingTableModule string
R5.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
R0.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.status.initialStatus string "UP"

TODO @signal, @statistic
R0.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.environment.initStage int 0

Initialization stage for the setup command
R0.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
R0.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
R0.environment.setupCommand string ""

A host OS system command
R0.environment.teardownCommand string ""

A host OS system command
R0.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.pcapRecorder.verbose bool true

Whether to log packets on the module output
R0.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
R0.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
R0.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
R0.pcapRecorder.fileFormat string "pcapng"
R0.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
R0.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
R0.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
R0.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
R0.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
R0.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
R0.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
R0.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
R0.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
R0.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R0.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
R0.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
R0.cb.forwardServiceRegistration bool true
R0.cb.forwardProtocolRegistration bool true
R0.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R0.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R0.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R0.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
R0.bl.forwardServiceRegistration bool true
R0.bl.forwardProtocolRegistration bool true
R0.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R0.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R0.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R0.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.li.interfaceTableModule string

Module path to the ~InterfaceTable module
R0.li.forwardServiceRegistration bool true
R0.li.forwardProtocolRegistration bool true
R0.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R0.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R0.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R0.eth.bitrate double
R0.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
R0.nl.forwardServiceRegistration bool true
R0.nl.forwardProtocolRegistration bool true
R0.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R0.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R0.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R0.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
R0.tn.forwardServiceRegistration bool true
R0.tn.forwardProtocolRegistration bool true
R0.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R0.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R0.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R0.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
R0.at.interfaceTableModule string

Module path to the ~InterfaceTable module
R0.at.forwardServiceRegistration bool true
R0.at.forwardProtocolRegistration bool true
R0.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
R0.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
R0.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
R0.bgp.interfaceTableModule string

The path to the InterfaceTable module
R0.bgp.routingTableModule string
R0.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
H5.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.status.initialStatus string "UP"

TODO @signal, @statistic
H5.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.environment.initStage int 0

Initialization stage for the setup command
H5.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H5.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H5.environment.setupCommand string ""

A host OS system command
H5.environment.teardownCommand string ""

A host OS system command
H5.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.pcapRecorder.verbose bool true

Whether to log packets on the module output
H5.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H5.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H5.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H5.pcapRecorder.fileFormat string "pcapng"
H5.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H5.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H5.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H5.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H5.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H5.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H5.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H5.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H5.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H5.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H5.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H5.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H5.cb.forwardServiceRegistration bool true
H5.cb.forwardProtocolRegistration bool true
H5.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H5.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H5.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H5.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H5.bl.forwardServiceRegistration bool true
H5.bl.forwardProtocolRegistration bool true
H5.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H5.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H5.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H5.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H5.li.forwardServiceRegistration bool true
H5.li.forwardProtocolRegistration bool true
H5.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H5.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H5.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H5.eth.bitrate double
H5.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H5.nl.forwardServiceRegistration bool true
H5.nl.forwardProtocolRegistration bool true
H5.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H5.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H5.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H5.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H5.tn.forwardServiceRegistration bool true
H5.tn.forwardProtocolRegistration bool true
H5.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H5.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H5.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H5.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H5.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H5.at.forwardServiceRegistration bool true
H5.at.forwardProtocolRegistration bool true
H5.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H5.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H5.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H6.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.status.initialStatus string "UP"

TODO @signal, @statistic
H6.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.environment.initStage int 0

Initialization stage for the setup command
H6.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H6.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H6.environment.setupCommand string ""

A host OS system command
H6.environment.teardownCommand string ""

A host OS system command
H6.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.pcapRecorder.verbose bool true

Whether to log packets on the module output
H6.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H6.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H6.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H6.pcapRecorder.fileFormat string "pcapng"
H6.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H6.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H6.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H6.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H6.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H6.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H6.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H6.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H6.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H6.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H6.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H6.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H6.cb.forwardServiceRegistration bool true
H6.cb.forwardProtocolRegistration bool true
H6.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H6.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H6.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H6.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H6.bl.forwardServiceRegistration bool true
H6.bl.forwardProtocolRegistration bool true
H6.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H6.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H6.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H6.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H6.li.forwardServiceRegistration bool true
H6.li.forwardProtocolRegistration bool true
H6.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H6.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H6.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H6.eth.bitrate double
H6.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H6.nl.forwardServiceRegistration bool true
H6.nl.forwardProtocolRegistration bool true
H6.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H6.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H6.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H6.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H6.tn.forwardServiceRegistration bool true
H6.tn.forwardProtocolRegistration bool true
H6.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H6.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H6.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H6.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H6.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H6.at.forwardServiceRegistration bool true
H6.at.forwardProtocolRegistration bool true
H6.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H6.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H6.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H7.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.status.initialStatus string "UP"

TODO @signal, @statistic
H7.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.environment.initStage int 0

Initialization stage for the setup command
H7.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H7.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H7.environment.setupCommand string ""

A host OS system command
H7.environment.teardownCommand string ""

A host OS system command
H7.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.pcapRecorder.verbose bool true

Whether to log packets on the module output
H7.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H7.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H7.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H7.pcapRecorder.fileFormat string "pcapng"
H7.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H7.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H7.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H7.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H7.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H7.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H7.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H7.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H7.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H7.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H7.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H7.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H7.cb.forwardServiceRegistration bool true
H7.cb.forwardProtocolRegistration bool true
H7.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H7.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H7.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H7.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H7.bl.forwardServiceRegistration bool true
H7.bl.forwardProtocolRegistration bool true
H7.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H7.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H7.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H7.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H7.li.forwardServiceRegistration bool true
H7.li.forwardProtocolRegistration bool true
H7.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H7.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H7.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H7.eth.bitrate double
H7.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H7.nl.forwardServiceRegistration bool true
H7.nl.forwardProtocolRegistration bool true
H7.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H7.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H7.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H7.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H7.tn.forwardServiceRegistration bool true
H7.tn.forwardProtocolRegistration bool true
H7.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H7.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H7.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H7.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H7.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H7.at.forwardServiceRegistration bool true
H7.at.forwardProtocolRegistration bool true
H7.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H7.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H7.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H8.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.status.initialStatus string "UP"

TODO @signal, @statistic
H8.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.environment.initStage int 0

Initialization stage for the setup command
H8.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H8.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H8.environment.setupCommand string ""

A host OS system command
H8.environment.teardownCommand string ""

A host OS system command
H8.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.pcapRecorder.verbose bool true

Whether to log packets on the module output
H8.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H8.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H8.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H8.pcapRecorder.fileFormat string "pcapng"
H8.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H8.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H8.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H8.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H8.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H8.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H8.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H8.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H8.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H8.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H8.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H8.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H8.cb.forwardServiceRegistration bool true
H8.cb.forwardProtocolRegistration bool true
H8.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H8.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H8.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H8.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H8.bl.forwardServiceRegistration bool true
H8.bl.forwardProtocolRegistration bool true
H8.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H8.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H8.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H8.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H8.li.forwardServiceRegistration bool true
H8.li.forwardProtocolRegistration bool true
H8.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H8.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H8.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H8.eth.bitrate double
H8.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H8.nl.forwardServiceRegistration bool true
H8.nl.forwardProtocolRegistration bool true
H8.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H8.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H8.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H8.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H8.tn.forwardServiceRegistration bool true
H8.tn.forwardProtocolRegistration bool true
H8.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H8.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H8.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H8.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H8.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H8.at.forwardServiceRegistration bool true
H8.at.forwardProtocolRegistration bool true
H8.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H8.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H8.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H3.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.status.initialStatus string "UP"

TODO @signal, @statistic
H3.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.environment.initStage int 0

Initialization stage for the setup command
H3.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H3.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H3.environment.setupCommand string ""

A host OS system command
H3.environment.teardownCommand string ""

A host OS system command
H3.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.pcapRecorder.verbose bool true

Whether to log packets on the module output
H3.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H3.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H3.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H3.pcapRecorder.fileFormat string "pcapng"
H3.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H3.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H3.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H3.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H3.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H3.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H3.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H3.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H3.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H3.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H3.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H3.cb.forwardServiceRegistration bool true
H3.cb.forwardProtocolRegistration bool true
H3.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H3.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H3.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H3.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H3.bl.forwardServiceRegistration bool true
H3.bl.forwardProtocolRegistration bool true
H3.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H3.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H3.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H3.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H3.li.forwardServiceRegistration bool true
H3.li.forwardProtocolRegistration bool true
H3.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H3.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H3.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H3.eth.bitrate double
H3.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H3.nl.forwardServiceRegistration bool true
H3.nl.forwardProtocolRegistration bool true
H3.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H3.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H3.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H3.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H3.tn.forwardServiceRegistration bool true
H3.tn.forwardProtocolRegistration bool true
H3.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H3.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H3.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H3.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H3.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H3.at.forwardServiceRegistration bool true
H3.at.forwardProtocolRegistration bool true
H3.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H3.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H3.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H4.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.status.initialStatus string "UP"

TODO @signal, @statistic
H4.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.environment.initStage int 0

Initialization stage for the setup command
H4.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
H4.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
H4.environment.setupCommand string ""

A host OS system command
H4.environment.teardownCommand string ""

A host OS system command
H4.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.pcapRecorder.verbose bool true

Whether to log packets on the module output
H4.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
H4.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
H4.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
H4.pcapRecorder.fileFormat string "pcapng"
H4.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
H4.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
H4.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
H4.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
H4.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
H4.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
H4.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
H4.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
H4.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
H4.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H4.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
H4.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
H4.cb.forwardServiceRegistration bool true
H4.cb.forwardProtocolRegistration bool true
H4.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H4.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H4.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H4.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
H4.bl.forwardServiceRegistration bool true
H4.bl.forwardProtocolRegistration bool true
H4.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H4.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H4.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H4.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.li.interfaceTableModule string

Module path to the ~InterfaceTable module
H4.li.forwardServiceRegistration bool true
H4.li.forwardProtocolRegistration bool true
H4.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H4.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H4.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H4.eth.bitrate double
H4.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
H4.nl.forwardServiceRegistration bool true
H4.nl.forwardProtocolRegistration bool true
H4.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H4.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H4.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H4.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
H4.tn.forwardServiceRegistration bool true
H4.tn.forwardProtocolRegistration bool true
H4.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H4.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H4.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
H4.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
H4.at.interfaceTableModule string

Module path to the ~InterfaceTable module
H4.at.forwardServiceRegistration bool true
H4.at.forwardProtocolRegistration bool true
H4.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
H4.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
H4.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
configurator.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.updateRoutes bool false

Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology bool false

Print extracted network topology to the module output
configurator.dumpLinks bool false

Print recognized network links to the module output
configurator.dumpAddresses bool false

Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)

Source code

network DiffservNetwork
{
    parameters:
        double edgeDatarate @unit(bps);
        double coreDatarate @unit(bps);
    types:
        channel edgeline extends ThruputMeteringChannel
        {
            delay = 2ms;
            datarate = parent.edgeDatarate;
            thruputDisplayFormat = "b B U";
        }
        channel coreline extends ThruputMeteringChannel
        {
            delay = 2ms;
            datarate = parent.coreDatarate;
            thruputDisplayFormat = "b B U";
        }
        channel ethernetline extends ThruputMeteringChannel
        {
            delay = 0.1us;
            datarate = 100Mbps;
            thruputDisplayFormat = "b B U";
        }
    submodules:
        H1: StandardHost {
            @display("p=250,100");
        }
        H2: StandardHost {
            @display("p=250,200");
        }
        R4: Router {
            @display("p=850,150");
        }
        R2: Router {
            @display("p=550,250");
        }
        R1: Router {
            @display("p=400,350");
        }
        R3: Router {
            @display("p=700,250");
        }
        R5: Router {
            @display("p=850,350");
        }
        R0: Router {
            @display("p=400,150");
        }
        H5: StandardHost {
            @display("p=1000,100");
        }
        H6: StandardHost {
            @display("p=1000,200");
        }
        H7: StandardHost {
            @display("p=1000,300");
        }
        H8: StandardHost {
            @display("p=1000,400");
        }
        H3: StandardHost {
            @display("p=250,300");
        }
        H4: StandardHost {
            @display("p=250,400");
        }
        configurator: Ipv4NetworkConfigurator {
            @display("p=100,100;is=s");
        }
    connections:
        H1.ethg++ <--> ethernetline <--> R0.ethg++;
        H2.ethg++ <--> ethernetline <--> R0.ethg++;
        H3.ethg++ <--> ethernetline <--> R1.ethg++;
        H4.ethg++ <--> ethernetline <--> R1.ethg++;
        H5.ethg++ <--> ethernetline <--> R4.ethg++;
        H6.ethg++ <--> ethernetline <--> R4.ethg++;
        H7.ethg++ <--> ethernetline <--> R5.ethg++;
        H8.ethg++ <--> ethernetline <--> R5.ethg++;
        R0.pppg++ <--> edgeline <--> R2.pppg++;
        R1.pppg++ <--> edgeline <--> R2.pppg++;
        R2.pppg++ <--> coreline <--> R3.pppg++;
        R4.pppg++ <--> coreline <--> R3.pppg++;
        R5.pppg++ <--> coreline <--> R3.pppg++;
}
File: examples/diffserv/onedomain/DiffservNetwork.ned

This documentation is released under the Creative Commons license