Network VisualizationG

Package: inet.tutorials.visualization
File: tutorials/visualization/VisualizationNetworks.ned

(no description)

IntegratedVisualizer OsgGeographicCoordinateSystem WirelessHost WirelessHost AccessPoint IPv4NetworkConfigurator Ieee80211ScalarRadioMedium WirelessHost Router EtherSwitch StandardHost AccessPoint Router PhysicalEnvironment

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Extends:

Name Type Description
VisualizationF network (no description)

Known subclasses:

Name Type Description
VisualizationH network (no description)

Properties:

Name Value Description
isNetwork
display bgb=0,0

Unassigned submodule parameters:

Name Type Default value Description
coordinateSystem.playgroundLatitude double

latitude coordinate of the playground origin
coordinateSystem.playgroundLongitude double

longitude coordinate of the playground origin
coordinateSystem.playgroundAltitude double 0m

altitude coordinate of the playground origin
coordinateSystem.playgroundHeading double 0deg

heading of the playground
coordinateSystem.playgroundElevation double 0deg

elevation of the playground
coordinateSystem.playgroundBank double 0deg

bank of the playground
pedestrian0.status.initialStatus string "UP"

TODO @signal, @statistic
pedestrian0.routingTable.forwarding bool
pedestrian0.routingTable.multicastForwarding bool
pedestrian0.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
pedestrian0.pcapRecorder.verbose bool false

whether to log packets on the module output
pedestrian0.pcapRecorder.pcapFile string ""

the PCAP file to be written
pedestrian0.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
pedestrian0.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
pedestrian0.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
pedestrian0.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
pedestrian0.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
pedestrian0.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pedestrian0.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
pedestrian0.lo0.lo.mtu int 4470B
pedestrian1.status.initialStatus string "UP"

TODO @signal, @statistic
pedestrian1.routingTable.forwarding bool
pedestrian1.routingTable.multicastForwarding bool
pedestrian1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
pedestrian1.pcapRecorder.verbose bool false

whether to log packets on the module output
pedestrian1.pcapRecorder.pcapFile string ""

the PCAP file to be written
pedestrian1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
pedestrian1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
pedestrian1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
pedestrian1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
pedestrian1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
pedestrian1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pedestrian1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
pedestrian1.lo0.lo.mtu int 4470B
accessPoint0.status.initialStatus string "UP"

TODO @signal, @statistic
accessPoint0.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
accessPoint0.macTable.agingTime double
accessPoint0.macTable.addressTableFile string
configurator.minLinkWeight double 1E-3
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
radioMedium.neighborCache.refillPeriod double
pedestrianVideo.status.initialStatus string "UP"

TODO @signal, @statistic
pedestrianVideo.routingTable.forwarding bool
pedestrianVideo.routingTable.multicastForwarding bool
pedestrianVideo.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
pedestrianVideo.pcapRecorder.verbose bool false

whether to log packets on the module output
pedestrianVideo.pcapRecorder.pcapFile string ""

the PCAP file to be written
pedestrianVideo.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
pedestrianVideo.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
pedestrianVideo.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
pedestrianVideo.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
pedestrianVideo.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
pedestrianVideo.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pedestrianVideo.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
pedestrianVideo.lo0.lo.mtu int 4470B
router0.status.initialStatus string "UP"

TODO @signal, @statistic
router0.routingTable.forwarding bool
router0.routingTable.multicastForwarding bool
router0.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router0.pcapRecorder.verbose bool false

whether to log packets on the module output
router0.pcapRecorder.pcapFile string ""

the PCAP file to be written
router0.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router0.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router0.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router0.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router0.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router0.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router0.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router0.lo0.lo.mtu int 4470B
router0.bgp.interfaceTableModule string

The path to the InterfaceTable module
router0.bgp.routingTableModule string
router0.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router0.bgp.dataTransferMode string
switch0.status.initialStatus string "UP"

TODO @signal, @statistic
switch0.l2NodeConfigurator.interfaceTableModule string
switch0.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator
switch0.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
switch0.macTable.agingTime double
switch0.macTable.addressTableFile string
switch0.stp.helloTime double
switch0.stp.forwardDelay double
switch0.stp.maxAge double
switch0.stp.bridgePriority int
switch0.stp.visualize bool
videoStreamServer.status.initialStatus string "UP"

TODO @signal, @statistic
videoStreamServer.routingTable.forwarding bool
videoStreamServer.routingTable.multicastForwarding bool
videoStreamServer.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
videoStreamServer.pcapRecorder.verbose bool false

whether to log packets on the module output
videoStreamServer.pcapRecorder.pcapFile string ""

the PCAP file to be written
videoStreamServer.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
videoStreamServer.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
videoStreamServer.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
videoStreamServer.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
videoStreamServer.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
videoStreamServer.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
videoStreamServer.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
videoStreamServer.lo0.lo.mtu int 4470B
accessPoint1.status.initialStatus string "UP"

TODO @signal, @statistic
accessPoint1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
accessPoint1.macTable.agingTime double
accessPoint1.macTable.addressTableFile string
router1.status.initialStatus string "UP"

TODO @signal, @statistic
router1.routingTable.forwarding bool
router1.routingTable.multicastForwarding bool
router1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router1.pcapRecorder.verbose bool false

whether to log packets on the module output
router1.pcapRecorder.pcapFile string ""

the PCAP file to be written
router1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router1.lo0.lo.mtu int 4470B
router1.bgp.interfaceTableModule string

The path to the InterfaceTable module
router1.bgp.routingTableModule string
router1.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router1.bgp.dataTransferMode string

Source code:

network VisualizationG extends VisualizationF
{
    parameters:
        @display("bgb=0,0");
    submodules:
        physicalEnvironment: PhysicalEnvironment {
            parameters:
                @display("p=100,450");
        }
}
//#### doxygen marker

This documentation is released under the Creative Commons license