Network ConfiguratorC

Package: inet.tutorials.configurator
File: tutorials/configurator/ConfiguratorC.ned

(no description)

StandardHost StandardHost StandardHost EtherSwitch StandardHost StandardHost StandardHost EtherSwitch StandardHost StandardHost StandardHost EtherSwitch StandardHost StandardHost StandardHost EtherSwitch StandardHost StandardHost StandardHost EtherSwitch StandardHost StandardHost StandardHost EtherSwitch Router Router Router Router IPv4NetworkConfigurator IntegratedCanvasVisualizer

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Known subclasses:

Name Type Description
ConfiguratorD network (no description)

Properties:

Name Value Description
isNetwork
display bgb=3225.915,1993.86

Unassigned submodule parameters:

Name Type Default value Description
area1lan1host0.status.initialStatus string "UP"

TODO @signal, @statistic

area1lan1host0.routingTable.forwarding bool
area1lan1host0.routingTable.multicastForwarding bool
area1lan1host0.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1lan1host0.pcapRecorder.verbose bool false

whether to log packets on the module output

area1lan1host0.pcapRecorder.pcapFile string ""

the PCAP file to be written

area1lan1host0.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area1lan1host0.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area1lan1host0.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area1lan1host0.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area1lan1host0.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area1lan1host0.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area1lan1host0.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area1lan1host0.lo0.lo.mtu int 4470B
area1lan1host1.status.initialStatus string "UP"

TODO @signal, @statistic

area1lan1host1.routingTable.forwarding bool
area1lan1host1.routingTable.multicastForwarding bool
area1lan1host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1lan1host1.pcapRecorder.verbose bool false

whether to log packets on the module output

area1lan1host1.pcapRecorder.pcapFile string ""

the PCAP file to be written

area1lan1host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area1lan1host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area1lan1host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area1lan1host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area1lan1host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area1lan1host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area1lan1host1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area1lan1host1.lo0.lo.mtu int 4470B
area1lan1host2.status.initialStatus string "UP"

TODO @signal, @statistic

area1lan1host2.routingTable.forwarding bool
area1lan1host2.routingTable.multicastForwarding bool
area1lan1host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1lan1host2.pcapRecorder.verbose bool false

whether to log packets on the module output

area1lan1host2.pcapRecorder.pcapFile string ""

the PCAP file to be written

area1lan1host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area1lan1host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area1lan1host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area1lan1host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area1lan1host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area1lan1host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area1lan1host2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area1lan1host2.lo0.lo.mtu int 4470B
area1switch1.status.initialStatus string "UP"

TODO @signal, @statistic

area1switch1.l2NodeConfigurator.interfaceTableModule string
area1switch1.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator

area1switch1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1switch1.macTable.agingTime double
area1switch1.macTable.addressTableFile string
area1switch1.stp.helloTime double
area1switch1.stp.forwardDelay double
area1switch1.stp.maxAge double
area1switch1.stp.bridgePriority int
area1switch1.stp.visualize bool
area2lan1host1.status.initialStatus string "UP"

TODO @signal, @statistic

area2lan1host1.routingTable.forwarding bool
area2lan1host1.routingTable.multicastForwarding bool
area2lan1host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2lan1host1.pcapRecorder.verbose bool false

whether to log packets on the module output

area2lan1host1.pcapRecorder.pcapFile string ""

the PCAP file to be written

area2lan1host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area2lan1host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area2lan1host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area2lan1host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area2lan1host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area2lan1host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area2lan1host1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area2lan1host1.lo0.lo.mtu int 4470B
area2lan1host2.status.initialStatus string "UP"

TODO @signal, @statistic

area2lan1host2.routingTable.forwarding bool
area2lan1host2.routingTable.multicastForwarding bool
area2lan1host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2lan1host2.pcapRecorder.verbose bool false

whether to log packets on the module output

area2lan1host2.pcapRecorder.pcapFile string ""

the PCAP file to be written

area2lan1host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area2lan1host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area2lan1host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area2lan1host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area2lan1host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area2lan1host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area2lan1host2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area2lan1host2.lo0.lo.mtu int 4470B
area2lan1host3.status.initialStatus string "UP"

TODO @signal, @statistic

area2lan1host3.routingTable.forwarding bool
area2lan1host3.routingTable.multicastForwarding bool
area2lan1host3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2lan1host3.pcapRecorder.verbose bool false

whether to log packets on the module output

area2lan1host3.pcapRecorder.pcapFile string ""

the PCAP file to be written

area2lan1host3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area2lan1host3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area2lan1host3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area2lan1host3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area2lan1host3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area2lan1host3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area2lan1host3.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area2lan1host3.lo0.lo.mtu int 4470B
area2switch1.status.initialStatus string "UP"

TODO @signal, @statistic

area2switch1.l2NodeConfigurator.interfaceTableModule string
area2switch1.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator

area2switch1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2switch1.macTable.agingTime double
area2switch1.macTable.addressTableFile string
area2switch1.stp.helloTime double
area2switch1.stp.forwardDelay double
area2switch1.stp.maxAge double
area2switch1.stp.bridgePriority int
area2switch1.stp.visualize bool
area3lan1host1.status.initialStatus string "UP"

TODO @signal, @statistic

area3lan1host1.routingTable.forwarding bool
area3lan1host1.routingTable.multicastForwarding bool
area3lan1host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3lan1host1.pcapRecorder.verbose bool false

whether to log packets on the module output

area3lan1host1.pcapRecorder.pcapFile string ""

the PCAP file to be written

area3lan1host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area3lan1host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area3lan1host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area3lan1host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area3lan1host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area3lan1host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area3lan1host1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area3lan1host1.lo0.lo.mtu int 4470B
area3lan1host2.status.initialStatus string "UP"

TODO @signal, @statistic

area3lan1host2.routingTable.forwarding bool
area3lan1host2.routingTable.multicastForwarding bool
area3lan1host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3lan1host2.pcapRecorder.verbose bool false

whether to log packets on the module output

area3lan1host2.pcapRecorder.pcapFile string ""

the PCAP file to be written

area3lan1host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area3lan1host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area3lan1host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area3lan1host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area3lan1host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area3lan1host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area3lan1host2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area3lan1host2.lo0.lo.mtu int 4470B
area3lan1host3.status.initialStatus string "UP"

TODO @signal, @statistic

area3lan1host3.routingTable.forwarding bool
area3lan1host3.routingTable.multicastForwarding bool
area3lan1host3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3lan1host3.pcapRecorder.verbose bool false

whether to log packets on the module output

area3lan1host3.pcapRecorder.pcapFile string ""

the PCAP file to be written

area3lan1host3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area3lan1host3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area3lan1host3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area3lan1host3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area3lan1host3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area3lan1host3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area3lan1host3.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area3lan1host3.lo0.lo.mtu int 4470B
area3switch1.status.initialStatus string "UP"

TODO @signal, @statistic

area3switch1.l2NodeConfigurator.interfaceTableModule string
area3switch1.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator

area3switch1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3switch1.macTable.agingTime double
area3switch1.macTable.addressTableFile string
area3switch1.stp.helloTime double
area3switch1.stp.forwardDelay double
area3switch1.stp.maxAge double
area3switch1.stp.bridgePriority int
area3switch1.stp.visualize bool
area1lan2host1.status.initialStatus string "UP"

TODO @signal, @statistic

area1lan2host1.routingTable.forwarding bool
area1lan2host1.routingTable.multicastForwarding bool
area1lan2host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1lan2host1.pcapRecorder.verbose bool false

whether to log packets on the module output

area1lan2host1.pcapRecorder.pcapFile string ""

the PCAP file to be written

area1lan2host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area1lan2host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area1lan2host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area1lan2host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area1lan2host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area1lan2host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area1lan2host1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area1lan2host1.lo0.lo.mtu int 4470B
area1lan2host2.status.initialStatus string "UP"

TODO @signal, @statistic

area1lan2host2.routingTable.forwarding bool
area1lan2host2.routingTable.multicastForwarding bool
area1lan2host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1lan2host2.pcapRecorder.verbose bool false

whether to log packets on the module output

area1lan2host2.pcapRecorder.pcapFile string ""

the PCAP file to be written

area1lan2host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area1lan2host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area1lan2host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area1lan2host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area1lan2host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area1lan2host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area1lan2host2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area1lan2host2.lo0.lo.mtu int 4470B
area1lan2host3.status.initialStatus string "UP"

TODO @signal, @statistic

area1lan2host3.routingTable.forwarding bool
area1lan2host3.routingTable.multicastForwarding bool
area1lan2host3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1lan2host3.pcapRecorder.verbose bool false

whether to log packets on the module output

area1lan2host3.pcapRecorder.pcapFile string ""

the PCAP file to be written

area1lan2host3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area1lan2host3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area1lan2host3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area1lan2host3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area1lan2host3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area1lan2host3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area1lan2host3.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area1lan2host3.lo0.lo.mtu int 4470B
area1switch2.status.initialStatus string "UP"

TODO @signal, @statistic

area1switch2.l2NodeConfigurator.interfaceTableModule string
area1switch2.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator

area1switch2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1switch2.macTable.agingTime double
area1switch2.macTable.addressTableFile string
area1switch2.stp.helloTime double
area1switch2.stp.forwardDelay double
area1switch2.stp.maxAge double
area1switch2.stp.bridgePriority int
area1switch2.stp.visualize bool
area2lan2host1.status.initialStatus string "UP"

TODO @signal, @statistic

area2lan2host1.routingTable.forwarding bool
area2lan2host1.routingTable.multicastForwarding bool
area2lan2host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2lan2host1.pcapRecorder.verbose bool false

whether to log packets on the module output

area2lan2host1.pcapRecorder.pcapFile string ""

the PCAP file to be written

area2lan2host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area2lan2host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area2lan2host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area2lan2host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area2lan2host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area2lan2host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area2lan2host1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area2lan2host1.lo0.lo.mtu int 4470B
area2lan2host2.status.initialStatus string "UP"

TODO @signal, @statistic

area2lan2host2.routingTable.forwarding bool
area2lan2host2.routingTable.multicastForwarding bool
area2lan2host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2lan2host2.pcapRecorder.verbose bool false

whether to log packets on the module output

area2lan2host2.pcapRecorder.pcapFile string ""

the PCAP file to be written

area2lan2host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area2lan2host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area2lan2host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area2lan2host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area2lan2host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area2lan2host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area2lan2host2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area2lan2host2.lo0.lo.mtu int 4470B
area2lan2host3.status.initialStatus string "UP"

TODO @signal, @statistic

area2lan2host3.routingTable.forwarding bool
area2lan2host3.routingTable.multicastForwarding bool
area2lan2host3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2lan2host3.pcapRecorder.verbose bool false

whether to log packets on the module output

area2lan2host3.pcapRecorder.pcapFile string ""

the PCAP file to be written

area2lan2host3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area2lan2host3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area2lan2host3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area2lan2host3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area2lan2host3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area2lan2host3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area2lan2host3.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area2lan2host3.lo0.lo.mtu int 4470B
area2switch2.status.initialStatus string "UP"

TODO @signal, @statistic

area2switch2.l2NodeConfigurator.interfaceTableModule string
area2switch2.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator

area2switch2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2switch2.macTable.agingTime double
area2switch2.macTable.addressTableFile string
area2switch2.stp.helloTime double
area2switch2.stp.forwardDelay double
area2switch2.stp.maxAge double
area2switch2.stp.bridgePriority int
area2switch2.stp.visualize bool
area3lan2host1.status.initialStatus string "UP"

TODO @signal, @statistic

area3lan2host1.routingTable.forwarding bool
area3lan2host1.routingTable.multicastForwarding bool
area3lan2host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3lan2host1.pcapRecorder.verbose bool false

whether to log packets on the module output

area3lan2host1.pcapRecorder.pcapFile string ""

the PCAP file to be written

area3lan2host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area3lan2host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area3lan2host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area3lan2host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area3lan2host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area3lan2host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area3lan2host1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area3lan2host1.lo0.lo.mtu int 4470B
area3lan2host2.status.initialStatus string "UP"

TODO @signal, @statistic

area3lan2host2.routingTable.forwarding bool
area3lan2host2.routingTable.multicastForwarding bool
area3lan2host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3lan2host2.pcapRecorder.verbose bool false

whether to log packets on the module output

area3lan2host2.pcapRecorder.pcapFile string ""

the PCAP file to be written

area3lan2host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area3lan2host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area3lan2host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area3lan2host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area3lan2host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area3lan2host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area3lan2host2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area3lan2host2.lo0.lo.mtu int 4470B
area3lan2host3.status.initialStatus string "UP"

TODO @signal, @statistic

area3lan2host3.routingTable.forwarding bool
area3lan2host3.routingTable.multicastForwarding bool
area3lan2host3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3lan2host3.pcapRecorder.verbose bool false

whether to log packets on the module output

area3lan2host3.pcapRecorder.pcapFile string ""

the PCAP file to be written

area3lan2host3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area3lan2host3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area3lan2host3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area3lan2host3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area3lan2host3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area3lan2host3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area3lan2host3.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area3lan2host3.lo0.lo.mtu int 4470B
area3switch2.status.initialStatus string "UP"

TODO @signal, @statistic

area3switch2.l2NodeConfigurator.interfaceTableModule string
area3switch2.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator

area3switch2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3switch2.macTable.agingTime double
area3switch2.macTable.addressTableFile string
area3switch2.stp.helloTime double
area3switch2.stp.forwardDelay double
area3switch2.stp.maxAge double
area3switch2.stp.bridgePriority int
area3switch2.stp.visualize bool
area1router.status.initialStatus string "UP"

TODO @signal, @statistic

area1router.routingTable.forwarding bool
area1router.routingTable.multicastForwarding bool
area1router.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area1router.pcapRecorder.verbose bool false

whether to log packets on the module output

area1router.pcapRecorder.pcapFile string ""

the PCAP file to be written

area1router.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area1router.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area1router.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area1router.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area1router.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area1router.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area1router.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area1router.lo0.lo.mtu int 4470B
area1router.bgp.interfaceTableModule string

The path to the InterfaceTable module

area1router.bgp.routingTableModule string
area1router.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
area1router.bgp.dataTransferMode string
area2router.status.initialStatus string "UP"

TODO @signal, @statistic

area2router.routingTable.forwarding bool
area2router.routingTable.multicastForwarding bool
area2router.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area2router.pcapRecorder.verbose bool false

whether to log packets on the module output

area2router.pcapRecorder.pcapFile string ""

the PCAP file to be written

area2router.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area2router.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area2router.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area2router.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area2router.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area2router.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area2router.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area2router.lo0.lo.mtu int 4470B
area2router.bgp.interfaceTableModule string

The path to the InterfaceTable module

area2router.bgp.routingTableModule string
area2router.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
area2router.bgp.dataTransferMode string
area3router.status.initialStatus string "UP"

TODO @signal, @statistic

area3router.routingTable.forwarding bool
area3router.routingTable.multicastForwarding bool
area3router.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

area3router.pcapRecorder.verbose bool false

whether to log packets on the module output

area3router.pcapRecorder.pcapFile string ""

the PCAP file to be written

area3router.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

area3router.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

area3router.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

area3router.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

area3router.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

area3router.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

area3router.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

area3router.lo0.lo.mtu int 4470B
area3router.bgp.interfaceTableModule string

The path to the InterfaceTable module

area3router.bgp.routingTableModule string
area3router.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
area3router.bgp.dataTransferMode string
backbonerouter.status.initialStatus string "UP"

TODO @signal, @statistic

backbonerouter.routingTable.forwarding bool
backbonerouter.routingTable.multicastForwarding bool
backbonerouter.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

backbonerouter.pcapRecorder.verbose bool false

whether to log packets on the module output

backbonerouter.pcapRecorder.pcapFile string ""

the PCAP file to be written

backbonerouter.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

backbonerouter.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

backbonerouter.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

backbonerouter.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

backbonerouter.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

backbonerouter.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

backbonerouter.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

backbonerouter.lo0.lo.mtu int 4470B
backbonerouter.bgp.interfaceTableModule string

The path to the InterfaceTable module

backbonerouter.bgp.routingTableModule string
backbonerouter.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
backbonerouter.bgp.dataTransferMode string
configurator.minLinkWeight double 1E-3
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes

configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network

configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces

configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)

configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)

configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)

configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)

configurator.dumpTopology bool false

print extracted network topology to the module output

configurator.dumpLinks bool false

print recognized network links to the module output

configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output

configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output

configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)

Source code:

network ConfiguratorC
{
    @display("bgb=3225.915,1993.86");
    submodules:
        area1lan1host0: StandardHost {
            @display("p=492.195,413.82");
        }
        area1lan1host1: StandardHost {
            @display("p=492.195,147.345");
        }
        area1lan1host2: StandardHost {
            @display("p=865.26,147.345");
        }
        area1switch1: EtherSwitch {
            @display("p=865.26,410.685");
        }
        area2lan1host1: StandardHost {
            @display("p=1357.455,1840.245");
        }
        area2lan1host2: StandardHost {
            @display("p=946.77,1840.245");
        }
        area2lan1host3: StandardHost {
            @display("p=558.03,1840.245");
        }
        area2switch1: EtherSwitch {
            @display("p=1119.1951,1514.205");
        }
        area3lan1host1: StandardHost {
            @display("p=2868.5251,1583.175");
        }
        area3lan1host2: StandardHost {
            @display("p=2868.5251,1322.97");
        }
        area3lan1host3: StandardHost {
            @display("p=2868.5251,1078.4401");
        }
        area3switch1: EtherSwitch {
            @display("p=2385.735,1075.305");
        }
        area1lan2host1: StandardHost {
            @display("p=410.685,1097.25");
        }
        area1lan2host2: StandardHost {
            @display("p=410.685,1322.97");
        }
        area1lan2host3: StandardHost {
            @display("p=410.685,1583.175");
        }
        area1switch2: EtherSwitch {
            @display("p=865.26,1094.115");
        }
        area2lan2host1: StandardHost {
            @display("p=2555.025,1840.245");
        }
        area2lan2host2: StandardHost {
            @display("p=2153.745,1840.245");
        }
        area2lan2host3: StandardHost {
            @display("p=1743.06,1840.245");
        }
        area2switch2: EtherSwitch {
            @display("p=2094.18,1511.0701");
        }
        area3lan2host1: StandardHost {
            @display("p=2551.8901,137.94");
        }
        area3lan2host2: StandardHost {
            @display("p=2997.06,137.94");
        }
        area3lan2host3: StandardHost {
            @display("p=2997.06,354.255");
        }
        area3switch2: EtherSwitch {
            @display("p=2385.735,410.685");
        }
        area1router: Router {
            @display("p=1232.055,755.53503");
        }
        area2router: Router {
            @display("p=1620.795,1322.97");
        }
        area3router: Router {
            @display("p=2012.67,755.53503");
        }
        backbonerouter: Router {
            @display("p=1620.795,934.23;i=abstract/router2");
        }
        configurator: IPv4NetworkConfigurator {
            @display("p=150,100");
        }
        visualizer: IntegratedCanvasVisualizer {
            @display("p=150,250");
        }
    connections:
        area2lan1host1.ethg++ <--> Eth10M <--> area2switch1.ethg++;
        area2lan1host2.ethg++ <--> Eth10M <--> area2switch1.ethg++;
        area2lan1host3.ethg++ <--> Eth10M <--> area2switch1.ethg++;
        area1switch2.ethg++ <--> Eth10M <--> area1lan2host1.ethg++;
        area1lan2host2.ethg++ <--> Eth10M <--> area1switch2.ethg++;
        area1switch2.ethg++ <--> Eth10M <--> area1lan2host3.ethg++;
        area1switch1.ethg++ <--> Eth10M <--> area1lan1host0.ethg++;
        area1switch1.ethg++ <--> Eth10M <--> area1lan1host1.ethg++;
        area1switch1.ethg++ <--> Eth10M <--> area1lan1host2.ethg++;
        area1switch1.ethg++ <--> Eth10M <--> area1router.ethg++;
        area1switch2.ethg++ <--> Eth10M <--> area1router.ethg++;
        area2switch1.ethg++ <--> Eth10M <--> area2router.ethg++;
        area2router.ethg++ <--> Eth10M <--> area2switch2.ethg++;
        area2switch2.ethg++ <--> Eth10M <--> area2lan2host1.ethg++;
        area2switch2.ethg++ <--> Eth10M <--> area2lan2host2.ethg++;
        area2switch2.ethg++ <--> Eth10M <--> area2lan2host3.ethg++;
        area3switch1.ethg++ <--> Eth10M <--> area3lan1host1.ethg++;
        area3switch1.ethg++ <--> Eth10M <--> area3lan1host2.ethg++;
        area3switch1.ethg++ <--> Eth10M <--> area3lan1host3.ethg++;
        area3switch1.ethg++ <--> Eth10M <--> area3router.ethg++;
        area3router.ethg++ <--> Eth10M <--> area3switch2.ethg++;
        area3switch2.ethg++ <--> Eth10M <--> area3lan2host1.ethg++;
        area3switch2.ethg++ <--> Eth10M <--> area3lan2host2.ethg++;
        area3switch2.ethg++ <--> Eth10M <--> area3lan2host3.ethg++;
        area2router.ethg++ <--> Eth10M <--> backbonerouter.ethg++;
        area1router.ethg++ <--> Eth10M <--> backbonerouter.ethg++;
        backbonerouter.ethg++ <--> Eth10M <--> area3router.ethg++;
}