Network PacketDropQueueOverflowShowcase

Package: inet.showcases.visualizer.packetdrop
File: showcases/visualizer/packetdrop/PacketDropVisualizationShowcase.ned

(no description)

StandardHost EtherSwitch Router AccessPoint WirelessHost IPv4NetworkConfigurator IntegratedVisualizer Ieee80211ScalarRadioMedium

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Properties:

Name Value Description
isNetwork
display bgb=720,400

Unassigned submodule parameters:

Name Type Default value Description
source.status.initialStatus string "UP"

TODO @signal, @statistic
source.routingTable.forwarding bool
source.routingTable.multicastForwarding bool
source.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
source.pcapRecorder.verbose bool false

whether to log packets on the module output
source.pcapRecorder.pcapFile string ""

the PCAP file to be written
source.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
source.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
source.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
source.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
source.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
source.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
source.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
source.lo0.lo.mtu int 4470B
etherSwitch.status.initialStatus string "UP"

TODO @signal, @statistic
etherSwitch.l2NodeConfigurator.interfaceTableModule string
etherSwitch.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the L2NetworkConfigurator; use "" if there is no configurator
etherSwitch.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
etherSwitch.macTable.agingTime double
etherSwitch.macTable.addressTableFile string
etherSwitch.stp.helloTime double
etherSwitch.stp.forwardDelay double
etherSwitch.stp.maxAge double
etherSwitch.stp.bridgePriority int
etherSwitch.stp.visualize bool
router.status.initialStatus string "UP"

TODO @signal, @statistic
router.routingTable.forwarding bool
router.routingTable.multicastForwarding bool
router.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router.pcapRecorder.verbose bool false

whether to log packets on the module output
router.pcapRecorder.pcapFile string ""

the PCAP file to be written
router.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router.lo0.lo.mtu int 4470B
router.bgp.interfaceTableModule string

The path to the InterfaceTable module
router.bgp.routingTableModule string
router.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router.bgp.dataTransferMode string
accessPoint.status.initialStatus string "UP"

TODO @signal, @statistic
accessPoint.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
accessPoint.macTable.agingTime double
accessPoint.macTable.addressTableFile string
destination.status.initialStatus string "UP"

TODO @signal, @statistic
destination.routingTable.forwarding bool
destination.routingTable.multicastForwarding bool
destination.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
destination.pcapRecorder.verbose bool false

whether to log packets on the module output
destination.pcapRecorder.pcapFile string ""

the PCAP file to be written
destination.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
destination.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
destination.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
destination.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
destination.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
destination.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
destination.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
destination.lo0.lo.mtu int 4470B
configurator.minLinkWeight double 1E-3
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
radioMedium.neighborCache.refillPeriod double

Source code:

network PacketDropQueueOverflowShowcase
{
    @display("bgb=720,400");
    submodules:
        source: StandardHost {
            @display("p=80,198");
        }
        etherSwitch: EtherSwitch {
            @display("p=211,197");
        }
        router: Router {
            @display("p=323,198");
        }
        accessPoint: AccessPoint {
            @display("p=449,197");
        }
        destination: WirelessHost {
            @display("p=589,194");
        }
        configurator: IPv4NetworkConfigurator {
            @display("p=88,37");
        }
        visualizer: IntegratedVisualizer {
            @display("p=267,37");
        }
        radioMedium: Ieee80211ScalarRadioMedium {
            @display("p=465,37");
        }
    connections:
        router.ethg++ <--> Eth100M <--> accessPoint.ethg++;
        source.ethg++ <--> Eth100G <--> etherSwitch.ethg++;
        etherSwitch.ethg++ <--> Eth10M <--> router.ethg++;
}

This documentation is released under the Creative Commons license