Network LinkBreakA

Package: inet.showcases.visualizer.linkbreak
File: showcases/visualizer/linkbreak/linkbreakvisualization.ned

(no description)

AdhocHost AdhocHost AdhocHost AdhocHost AdhocHost IPv4NetworkConfigurator Ieee80211ScalarRadioMedium IntegratedVisualizer LifecycleController ScenarioManager

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Properties:

Name Value Description
isNetwork
display bgb=865,515

Unassigned submodule parameters:

Name Type Default value Description
source.status.initialStatus string "UP"

TODO @signal, @statistic
source.routingTable.forwarding bool
source.routingTable.multicastForwarding bool
source.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
source.pcapRecorder.verbose bool false

whether to log packets on the module output
source.pcapRecorder.pcapFile string ""

the PCAP file to be written
source.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
source.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
source.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
source.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
source.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
source.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
source.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
source.lo0.lo.mtu int 4470B
adhocHost1.status.initialStatus string "UP"

TODO @signal, @statistic
adhocHost1.routingTable.forwarding bool
adhocHost1.routingTable.multicastForwarding bool
adhocHost1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
adhocHost1.pcapRecorder.verbose bool false

whether to log packets on the module output
adhocHost1.pcapRecorder.pcapFile string ""

the PCAP file to be written
adhocHost1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
adhocHost1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
adhocHost1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
adhocHost1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
adhocHost1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
adhocHost1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
adhocHost1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
adhocHost1.lo0.lo.mtu int 4470B
adhocHost2.status.initialStatus string "UP"

TODO @signal, @statistic
adhocHost2.routingTable.forwarding bool
adhocHost2.routingTable.multicastForwarding bool
adhocHost2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
adhocHost2.pcapRecorder.verbose bool false

whether to log packets on the module output
adhocHost2.pcapRecorder.pcapFile string ""

the PCAP file to be written
adhocHost2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
adhocHost2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
adhocHost2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
adhocHost2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
adhocHost2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
adhocHost2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
adhocHost2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
adhocHost2.lo0.lo.mtu int 4470B
destination1.status.initialStatus string "UP"

TODO @signal, @statistic
destination1.routingTable.forwarding bool
destination1.routingTable.multicastForwarding bool
destination1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
destination1.pcapRecorder.verbose bool false

whether to log packets on the module output
destination1.pcapRecorder.pcapFile string ""

the PCAP file to be written
destination1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
destination1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
destination1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
destination1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
destination1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
destination1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
destination1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
destination1.lo0.lo.mtu int 4470B
destination2.status.initialStatus string "UP"

TODO @signal, @statistic
destination2.routingTable.forwarding bool
destination2.routingTable.multicastForwarding bool
destination2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
destination2.pcapRecorder.verbose bool false

whether to log packets on the module output
destination2.pcapRecorder.pcapFile string ""

the PCAP file to be written
destination2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
destination2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
destination2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
destination2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
destination2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
destination2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
destination2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
destination2.lo0.lo.mtu int 4470B
configurator.minLinkWeight double 1E-3
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
radioMedium.neighborCache.refillPeriod double
scenarioManager.script xml xml("")

Source code:

network LinkBreakA
{
    @display("bgb=865,515");
    submodules:
        source: AdhocHost {
            @display("p=240,285");
        }
        adhocHost1: AdhocHost {
            @display("p=395,261");
        }
        adhocHost2: AdhocHost {
            @display("p=497,134");
        }
        destination1: AdhocHost {
            @display("p=697,119");
        }
        destination2: AdhocHost {
            @display("p=509,378");
        }
        configurator: IPv4NetworkConfigurator {
            @display("p=71,44");
        }
        radioMedium: Ieee80211ScalarRadioMedium {
            @display("p=70,105");
        }
        visualizer: IntegratedVisualizer {
            @display("p=71,163");
        }
        lifecycleController: LifecycleController {
            @display("p=70.60625,227.02625");
        }
        scenarioManager: ScenarioManager {
            @display("p=70.60625,294.37375");
        }
}

This documentation is released under the Creative Commons license