Network Network

Package: inet.examples.pim.iptv
File: examples/pim/iptv/Network.ned

A generated network with grid topology.

MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter MulticastRouter IPv4NetworkConfigurator StandardHost StandardHost

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Properties:

Name Value Description
isNetwork

Unassigned submodule parameters:

Name Type Default value Description
R00.status.initialStatus string "UP"

TODO @signal, @statistic

R00.routingTable.forwarding bool
R00.routingTable.multicastForwarding bool
R00.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R00.pcapRecorder.verbose bool false

whether to log packets on the module output

R00.pcapRecorder.pcapFile string ""

the PCAP file to be written

R00.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R00.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R00.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R00.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R00.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R00.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R00.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R00.lo0.lo.mtu int 4470B
R00.bgp.interfaceTableModule string

The path to the InterfaceTable module

R00.bgp.routingTableModule string
R00.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R00.bgp.dataTransferMode string
R01.status.initialStatus string "UP"

TODO @signal, @statistic

R01.routingTable.forwarding bool
R01.routingTable.multicastForwarding bool
R01.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R01.pcapRecorder.verbose bool false

whether to log packets on the module output

R01.pcapRecorder.pcapFile string ""

the PCAP file to be written

R01.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R01.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R01.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R01.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R01.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R01.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R01.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R01.lo0.lo.mtu int 4470B
R01.bgp.interfaceTableModule string

The path to the InterfaceTable module

R01.bgp.routingTableModule string
R01.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R01.bgp.dataTransferMode string
R02.status.initialStatus string "UP"

TODO @signal, @statistic

R02.routingTable.forwarding bool
R02.routingTable.multicastForwarding bool
R02.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R02.pcapRecorder.verbose bool false

whether to log packets on the module output

R02.pcapRecorder.pcapFile string ""

the PCAP file to be written

R02.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R02.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R02.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R02.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R02.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R02.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R02.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R02.lo0.lo.mtu int 4470B
R02.bgp.interfaceTableModule string

The path to the InterfaceTable module

R02.bgp.routingTableModule string
R02.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R02.bgp.dataTransferMode string
R03.status.initialStatus string "UP"

TODO @signal, @statistic

R03.routingTable.forwarding bool
R03.routingTable.multicastForwarding bool
R03.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R03.pcapRecorder.verbose bool false

whether to log packets on the module output

R03.pcapRecorder.pcapFile string ""

the PCAP file to be written

R03.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R03.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R03.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R03.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R03.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R03.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R03.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R03.lo0.lo.mtu int 4470B
R03.bgp.interfaceTableModule string

The path to the InterfaceTable module

R03.bgp.routingTableModule string
R03.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R03.bgp.dataTransferMode string
R10.status.initialStatus string "UP"

TODO @signal, @statistic

R10.routingTable.forwarding bool
R10.routingTable.multicastForwarding bool
R10.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R10.pcapRecorder.verbose bool false

whether to log packets on the module output

R10.pcapRecorder.pcapFile string ""

the PCAP file to be written

R10.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R10.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R10.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R10.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R10.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R10.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R10.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R10.lo0.lo.mtu int 4470B
R10.bgp.interfaceTableModule string

The path to the InterfaceTable module

R10.bgp.routingTableModule string
R10.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R10.bgp.dataTransferMode string
R11.status.initialStatus string "UP"

TODO @signal, @statistic

R11.routingTable.forwarding bool
R11.routingTable.multicastForwarding bool
R11.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R11.pcapRecorder.verbose bool false

whether to log packets on the module output

R11.pcapRecorder.pcapFile string ""

the PCAP file to be written

R11.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R11.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R11.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R11.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R11.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R11.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R11.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R11.lo0.lo.mtu int 4470B
R11.bgp.interfaceTableModule string

The path to the InterfaceTable module

R11.bgp.routingTableModule string
R11.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R11.bgp.dataTransferMode string
R12.status.initialStatus string "UP"

TODO @signal, @statistic

R12.routingTable.forwarding bool
R12.routingTable.multicastForwarding bool
R12.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R12.pcapRecorder.verbose bool false

whether to log packets on the module output

R12.pcapRecorder.pcapFile string ""

the PCAP file to be written

R12.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R12.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R12.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R12.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R12.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R12.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R12.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R12.lo0.lo.mtu int 4470B
R12.bgp.interfaceTableModule string

The path to the InterfaceTable module

R12.bgp.routingTableModule string
R12.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R12.bgp.dataTransferMode string
R13.status.initialStatus string "UP"

TODO @signal, @statistic

R13.routingTable.forwarding bool
R13.routingTable.multicastForwarding bool
R13.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R13.pcapRecorder.verbose bool false

whether to log packets on the module output

R13.pcapRecorder.pcapFile string ""

the PCAP file to be written

R13.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R13.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R13.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R13.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R13.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R13.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R13.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R13.lo0.lo.mtu int 4470B
R13.bgp.interfaceTableModule string

The path to the InterfaceTable module

R13.bgp.routingTableModule string
R13.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R13.bgp.dataTransferMode string
R20.status.initialStatus string "UP"

TODO @signal, @statistic

R20.routingTable.forwarding bool
R20.routingTable.multicastForwarding bool
R20.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R20.pcapRecorder.verbose bool false

whether to log packets on the module output

R20.pcapRecorder.pcapFile string ""

the PCAP file to be written

R20.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R20.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R20.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R20.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R20.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R20.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R20.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R20.lo0.lo.mtu int 4470B
R20.bgp.interfaceTableModule string

The path to the InterfaceTable module

R20.bgp.routingTableModule string
R20.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R20.bgp.dataTransferMode string
R21.status.initialStatus string "UP"

TODO @signal, @statistic

R21.routingTable.forwarding bool
R21.routingTable.multicastForwarding bool
R21.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R21.pcapRecorder.verbose bool false

whether to log packets on the module output

R21.pcapRecorder.pcapFile string ""

the PCAP file to be written

R21.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R21.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R21.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R21.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R21.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R21.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R21.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R21.lo0.lo.mtu int 4470B
R21.bgp.interfaceTableModule string

The path to the InterfaceTable module

R21.bgp.routingTableModule string
R21.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R21.bgp.dataTransferMode string
R22.status.initialStatus string "UP"

TODO @signal, @statistic

R22.routingTable.forwarding bool
R22.routingTable.multicastForwarding bool
R22.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R22.pcapRecorder.verbose bool false

whether to log packets on the module output

R22.pcapRecorder.pcapFile string ""

the PCAP file to be written

R22.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R22.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R22.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R22.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R22.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R22.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R22.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R22.lo0.lo.mtu int 4470B
R22.bgp.interfaceTableModule string

The path to the InterfaceTable module

R22.bgp.routingTableModule string
R22.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R22.bgp.dataTransferMode string
R23.status.initialStatus string "UP"

TODO @signal, @statistic

R23.routingTable.forwarding bool
R23.routingTable.multicastForwarding bool
R23.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R23.pcapRecorder.verbose bool false

whether to log packets on the module output

R23.pcapRecorder.pcapFile string ""

the PCAP file to be written

R23.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R23.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R23.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R23.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R23.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R23.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R23.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R23.lo0.lo.mtu int 4470B
R23.bgp.interfaceTableModule string

The path to the InterfaceTable module

R23.bgp.routingTableModule string
R23.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R23.bgp.dataTransferMode string
R30.status.initialStatus string "UP"

TODO @signal, @statistic

R30.routingTable.forwarding bool
R30.routingTable.multicastForwarding bool
R30.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R30.pcapRecorder.verbose bool false

whether to log packets on the module output

R30.pcapRecorder.pcapFile string ""

the PCAP file to be written

R30.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R30.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R30.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R30.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R30.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R30.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R30.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R30.lo0.lo.mtu int 4470B
R30.bgp.interfaceTableModule string

The path to the InterfaceTable module

R30.bgp.routingTableModule string
R30.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R30.bgp.dataTransferMode string
R31.status.initialStatus string "UP"

TODO @signal, @statistic

R31.routingTable.forwarding bool
R31.routingTable.multicastForwarding bool
R31.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R31.pcapRecorder.verbose bool false

whether to log packets on the module output

R31.pcapRecorder.pcapFile string ""

the PCAP file to be written

R31.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R31.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R31.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R31.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R31.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R31.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R31.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R31.lo0.lo.mtu int 4470B
R31.bgp.interfaceTableModule string

The path to the InterfaceTable module

R31.bgp.routingTableModule string
R31.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R31.bgp.dataTransferMode string
R32.status.initialStatus string "UP"

TODO @signal, @statistic

R32.routingTable.forwarding bool
R32.routingTable.multicastForwarding bool
R32.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R32.pcapRecorder.verbose bool false

whether to log packets on the module output

R32.pcapRecorder.pcapFile string ""

the PCAP file to be written

R32.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R32.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R32.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R32.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R32.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R32.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R32.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R32.lo0.lo.mtu int 4470B
R32.bgp.interfaceTableModule string

The path to the InterfaceTable module

R32.bgp.routingTableModule string
R32.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R32.bgp.dataTransferMode string
R33.status.initialStatus string "UP"

TODO @signal, @statistic

R33.routingTable.forwarding bool
R33.routingTable.multicastForwarding bool
R33.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

R33.pcapRecorder.verbose bool false

whether to log packets on the module output

R33.pcapRecorder.pcapFile string ""

the PCAP file to be written

R33.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

R33.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

R33.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

R33.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

R33.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

R33.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

R33.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

R33.lo0.lo.mtu int 4470B
R33.bgp.interfaceTableModule string

The path to the InterfaceTable module

R33.bgp.routingTableModule string
R33.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
R33.bgp.dataTransferMode string
configurator.minLinkWeight double 1E-3
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes

configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network

configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces

configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)

configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)

configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)

configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)

configurator.dumpTopology bool false

print extracted network topology to the module output

configurator.dumpLinks bool false

print recognized network links to the module output

configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output

configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output

configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)

client.status.initialStatus string "UP"

TODO @signal, @statistic

client.routingTable.forwarding bool
client.routingTable.multicastForwarding bool
client.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

client.pcapRecorder.verbose bool false

whether to log packets on the module output

client.pcapRecorder.pcapFile string ""

the PCAP file to be written

client.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

client.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

client.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

client.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

client.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

client.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

client.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

client.lo0.lo.mtu int 4470B
server.status.initialStatus string "UP"

TODO @signal, @statistic

server.routingTable.forwarding bool
server.routingTable.multicastForwarding bool
server.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

server.pcapRecorder.verbose bool false

whether to log packets on the module output

server.pcapRecorder.pcapFile string ""

the PCAP file to be written

server.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

server.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

server.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

server.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

server.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

server.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

server.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

server.lo0.lo.mtu int 4470B

Source code:

//
// A generated network with grid topology.
//
network Network
{
    submodules:
        R00: MulticastRouter {
            @display("p=150,50");
            gates:
                ethg[4];
        }
        R01: MulticastRouter {
            @display("p=150,125");
            gates:
                ethg[4];
        }
        R02: MulticastRouter {
            @display("p=150,200");
            gates:
                ethg[4];
        }
        R03: MulticastRouter {
            @display("p=150,275");
            gates:
                ethg[4];
        }

        R10: MulticastRouter {
            @display("p=225,50");
            gates:
                ethg[4];
        }
        R11: MulticastRouter {
            @display("p=225,125");
            gates:
                ethg[4];
        }
        R12: MulticastRouter {
            @display("p=225,200");
            gates:
                ethg[4];
        }
        R13: MulticastRouter {
            @display("p=225,275");
            gates:
                ethg[4];
        }

        R20: MulticastRouter {
            @display("p=300,50");
            gates:
                ethg[4];
        }
        R21: MulticastRouter {
            @display("p=300,125");
            gates:
                ethg[4];
        }
        R22: MulticastRouter {
            @display("p=300,200");
            gates:
                ethg[4];
        }
        R23: MulticastRouter {
            @display("p=300,275");
            gates:
                ethg[4];
        }

        R30: MulticastRouter {
            @display("p=375,50");
            gates:
                ethg[4];
        }
        R31: MulticastRouter {
            @display("p=375,125");
            gates:
                ethg[4];
        }
        R32: MulticastRouter {
            @display("p=375,200");
            gates:
                ethg[4];
        }
        R33: MulticastRouter {
            @display("p=375,275");
            gates:
                ethg[4];
        }


        configurator: IPv4NetworkConfigurator {
            @display("p=513,50");
        }
        client: StandardHost {
            @display("p=493,275");
        }
        server: StandardHost {
            @display("p=48,50");
        }
    connections allowunconnected:
        R00.ethg[1] <--> Eth100M <--> R10.ethg[0];
        R00.ethg[3] <--> Eth100M <--> R01.ethg[2];
        R01.ethg[1] <--> Eth100M <--> R11.ethg[0];
        R01.ethg[3] <--> Eth100M <--> R02.ethg[2];
        R02.ethg[1] <--> Eth100M <--> R12.ethg[0];
        R02.ethg[3] <--> Eth100M <--> R03.ethg[2];
        R03.ethg[1] <--> Eth100M <--> R13.ethg[0];

        R10.ethg[1] <--> Eth100M <--> R20.ethg[0];
        R10.ethg[3] <--> Eth100M <--> R11.ethg[2];
        R11.ethg[1] <--> Eth100M <--> R21.ethg[0];
        R11.ethg[3] <--> Eth100M <--> R12.ethg[2];
        R12.ethg[1] <--> Eth100M <--> R22.ethg[0];
        R12.ethg[3] <--> Eth100M <--> R13.ethg[2];
        R13.ethg[1] <--> Eth100M <--> R23.ethg[0];

        R20.ethg[1] <--> Eth100M <--> R30.ethg[0];
        R20.ethg[3] <--> Eth100M <--> R21.ethg[2];
        R21.ethg[1] <--> Eth100M <--> R31.ethg[0];
        R21.ethg[3] <--> Eth100M <--> R22.ethg[2];
        R22.ethg[1] <--> Eth100M <--> R32.ethg[0];
        R22.ethg[3] <--> Eth100M <--> R23.ethg[2];
        R23.ethg[1] <--> Eth100M <--> R33.ethg[0];


        R30.ethg[3] <--> Eth100M <--> R31.ethg[2];

        R31.ethg[3] <--> Eth100M <--> R32.ethg[2];

        R32.ethg[3] <--> Eth100M <--> R33.ethg[2];


        server.ethg++ <--> Eth100M <--> R00.ethg[0];
        R33.ethg[1] <--> Eth100M <--> client.ethg++;
}