Network OSPF_AreaTest

Package: inet.examples.ospfv2.areas
File: examples/ospfv2/areas/Areas.ned

(no description)

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Properties:

Name	Value	Description
isNetwork

Unassigned submodule parameters:

Name	Type	Default value	Description
Area1.R1.status.initialStatus	string	"UP"	TODO @signal, @statistic
Area1.R1.routingTable.forwarding	bool
Area1.R1.routingTable.multicastForwarding	bool
Area1.R1.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
Area1.R1.pcapRecorder.verbose	bool	false	whether to log packets on the module output
Area1.R1.pcapRecorder.pcapFile	string	""	the PCAP file to be written
Area1.R1.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
Area1.R1.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
Area1.R1.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
Area1.R1.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
Area1.R1.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
Area1.R1.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
Area1.R1.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
Area1.R1.lo0.lo.mtu	int	4470B
Area1.R1.bgp.interfaceTableModule	string		The path to the InterfaceTable module
Area1.R1.bgp.routingTableModule	string
Area1.R1.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
Area1.R1.bgp.dataTransferMode	string
Area1.R3.status.initialStatus	string	"UP"	TODO @signal, @statistic
Area1.R3.routingTable.forwarding	bool
Area1.R3.routingTable.multicastForwarding	bool
Area1.R3.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
Area1.R3.pcapRecorder.verbose	bool	false	whether to log packets on the module output
Area1.R3.pcapRecorder.pcapFile	string	""	the PCAP file to be written
Area1.R3.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
Area1.R3.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
Area1.R3.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
Area1.R3.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
Area1.R3.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
Area1.R3.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
Area1.R3.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
Area1.R3.lo0.lo.mtu	int	4470B
Area1.R3.bgp.interfaceTableModule	string		The path to the InterfaceTable module
Area1.R3.bgp.routingTableModule	string
Area1.R3.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
Area1.R3.bgp.dataTransferMode	string
Area1.H1.status.initialStatus	string	"UP"	TODO @signal, @statistic
Area1.H1.routingTable.forwarding	bool
Area1.H1.routingTable.multicastForwarding	bool
Area1.H1.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
Area1.H1.pcapRecorder.verbose	bool	false	whether to log packets on the module output
Area1.H1.pcapRecorder.pcapFile	string	""	the PCAP file to be written
Area1.H1.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
Area1.H1.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
Area1.H1.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
Area1.H1.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
Area1.H1.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
Area1.H1.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
Area1.H1.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
Area1.H1.lo0.lo.mtu	int	4470B
Area1.H2.status.initialStatus	string	"UP"	TODO @signal, @statistic
Area1.H2.routingTable.forwarding	bool
Area1.H2.routingTable.multicastForwarding	bool
Area1.H2.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
Area1.H2.pcapRecorder.verbose	bool	false	whether to log packets on the module output
Area1.H2.pcapRecorder.pcapFile	string	""	the PCAP file to be written
Area1.H2.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
Area1.H2.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
Area1.H2.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
Area1.H2.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
Area1.H2.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
Area1.H2.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
Area1.H2.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
Area1.H2.lo0.lo.mtu	int	4470B
Area1.R2.status.initialStatus	string	"UP"	TODO @signal, @statistic
Area1.R2.routingTable.forwarding	bool
Area1.R2.routingTable.multicastForwarding	bool
Area1.R2.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
Area1.R2.pcapRecorder.verbose	bool	false	whether to log packets on the module output
Area1.R2.pcapRecorder.pcapFile	string	""	the PCAP file to be written
Area1.R2.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
Area1.R2.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
Area1.R2.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
Area1.R2.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
Area1.R2.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
Area1.R2.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
Area1.R2.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
Area1.R2.lo0.lo.mtu	int	4470B
Area1.R2.bgp.interfaceTableModule	string		The path to the InterfaceTable module
Area1.R2.bgp.routingTableModule	string
Area1.R2.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
Area1.R2.bgp.dataTransferMode	string
Area2.H3.status.initialStatus	string	"UP"	TODO @signal, @statistic
Area2.H3.routingTable.forwarding	bool
Area2.H3.routingTable.multicastForwarding	bool
Area2.H3.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
Area2.H3.pcapRecorder.verbose	bool	false	whether to log packets on the module output
Area2.H3.pcapRecorder.pcapFile	string	""	the PCAP file to be written
Area2.H3.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
Area2.H3.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
Area2.H3.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
Area2.H3.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
Area2.H3.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
Area2.H3.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
Area2.H3.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
Area2.H3.lo0.lo.mtu	int	4470B
Area2.R5.status.initialStatus	string	"UP"	TODO @signal, @statistic
Area2.R5.routingTable.forwarding	bool
Area2.R5.routingTable.multicastForwarding	bool
Area2.R5.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
Area2.R5.pcapRecorder.verbose	bool	false	whether to log packets on the module output
Area2.R5.pcapRecorder.pcapFile	string	""	the PCAP file to be written
Area2.R5.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
Area2.R5.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
Area2.R5.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
Area2.R5.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
Area2.R5.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
Area2.R5.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
Area2.R5.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
Area2.R5.lo0.lo.mtu	int	4470B
Area2.R5.bgp.interfaceTableModule	string		The path to the InterfaceTable module
Area2.R5.bgp.routingTableModule	string
Area2.R5.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
Area2.R5.bgp.dataTransferMode	string
Area2.R4.status.initialStatus	string	"UP"	TODO @signal, @statistic
Area2.R4.routingTable.forwarding	bool
Area2.R4.routingTable.multicastForwarding	bool
Area2.R4.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
Area2.R4.pcapRecorder.verbose	bool	false	whether to log packets on the module output
Area2.R4.pcapRecorder.pcapFile	string	""	the PCAP file to be written
Area2.R4.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
Area2.R4.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
Area2.R4.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
Area2.R4.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
Area2.R4.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
Area2.R4.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
Area2.R4.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
Area2.R4.lo0.lo.mtu	int	4470B
Area2.R4.bgp.interfaceTableModule	string		The path to the InterfaceTable module
Area2.R4.bgp.routingTableModule	string
Area2.R4.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
Area2.R4.bgp.dataTransferMode	string
configurator.minLinkWeight	double	1E-3
configurator.assignAddresses	bool	true	assign IP addresses to all interfaces in the network
configurator.addSubnetRoutes	bool	true	add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.optimizeRoutes	bool	true	optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology	bool	false	print extracted network topology to the module output
configurator.dumpLinks	bool	false	print recognized network links to the module output
configurator.dumpAddresses	bool	false	print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes	bool	false	print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig	string	""	write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)

Source code:

network OSPF_AreaTest
{
    submodules:
        Area1: TwoNetsArea {
            parameters:
                @display("p=108,148;b=136,128");
            gates:
                ethg[1];
        }
        Area2: OneNetArea {
            parameters:
                @display("p=322,148;b=136,128");
            gates:
                ethg[1];
        }
        configurator: IPv4NetworkConfigurator {
            parameters:
                config = xml("<config>"+
                            "<interface among='Area1.*' address='192.168.11.x' netmask='255.255.255.x' />"+

                            "<interface among='Area2.*' address='192.168.22.x' netmask='255.255.255.x' />"+

                            "<interface hosts='Area1.*' towards='Area2.*' address='192.168.0.x' netmask='255.255.255.x' />"+
                            "<interface hosts='Area2.*' towards='Area1.*' address='192.168.0.x' netmask='255.255.255.x' />"+

                            "<route hosts='Area*.H*' destination='*' netmask='0.0.0.0' interface='eth0' />"+
                            "</config>");
                addStaticRoutes = false;
                addDefaultRoutes = false;
                assignDisjunctSubnetAddresses = false;
                @display("p=75,43");
        }
    connections:
        Area1.ethg[0] <--> ThruputMeteringChannel {  delay = 0.1us; datarate = 100 Mbps; thruputDisplayFormat = "#N"; } <--> Area2.ethg[0];
}