Network ARPTest

Package: inet.examples.ethernet.arptest2
File: examples/ethernet/arptest2/ARPTest.ned

(no description)

StandardHost Router Router Router EtherBus Router EtherBus Router Router Router Router StandardHost IPv4NetworkConfigurator

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Properties:

Name Value Description
isNetwork

Unassigned submodule parameters:

Name Type Default value Description
server.status.initialStatus string "UP"

TODO @signal, @statistic
server.routingTable.forwarding bool
server.routingTable.multicastForwarding bool
server.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
server.pcapRecorder.verbose bool false

whether to log packets on the module output
server.pcapRecorder.pcapFile string ""

the PCAP file to be written
server.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
server.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
server.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
server.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
server.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
server.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
server.lo0.lo.mtu int 4470B
router8.status.initialStatus string "UP"

TODO @signal, @statistic
router8.routingTable.forwarding bool
router8.routingTable.multicastForwarding bool
router8.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router8.pcapRecorder.verbose bool false

whether to log packets on the module output
router8.pcapRecorder.pcapFile string ""

the PCAP file to be written
router8.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router8.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router8.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router8.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router8.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router8.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router8.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router8.lo0.lo.mtu int 4470B
router8.bgp.interfaceTableModule string

The path to the InterfaceTable module
router8.bgp.routingTableModule string
router8.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router8.bgp.dataTransferMode string
router7.status.initialStatus string "UP"

TODO @signal, @statistic
router7.routingTable.forwarding bool
router7.routingTable.multicastForwarding bool
router7.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router7.pcapRecorder.verbose bool false

whether to log packets on the module output
router7.pcapRecorder.pcapFile string ""

the PCAP file to be written
router7.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router7.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router7.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router7.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router7.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router7.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router7.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router7.lo0.lo.mtu int 4470B
router7.bgp.interfaceTableModule string

The path to the InterfaceTable module
router7.bgp.routingTableModule string
router7.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router7.bgp.dataTransferMode string
router6.status.initialStatus string "UP"

TODO @signal, @statistic
router6.routingTable.forwarding bool
router6.routingTable.multicastForwarding bool
router6.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router6.pcapRecorder.verbose bool false

whether to log packets on the module output
router6.pcapRecorder.pcapFile string ""

the PCAP file to be written
router6.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router6.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router6.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router6.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router6.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router6.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router6.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router6.lo0.lo.mtu int 4470B
router6.bgp.interfaceTableModule string

The path to the InterfaceTable module
router6.bgp.routingTableModule string
router6.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router6.bgp.dataTransferMode string
router5.status.initialStatus string "UP"

TODO @signal, @statistic
router5.routingTable.forwarding bool
router5.routingTable.multicastForwarding bool
router5.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router5.pcapRecorder.verbose bool false

whether to log packets on the module output
router5.pcapRecorder.pcapFile string ""

the PCAP file to be written
router5.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router5.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router5.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router5.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router5.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router5.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router5.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router5.lo0.lo.mtu int 4470B
router5.bgp.interfaceTableModule string

The path to the InterfaceTable module
router5.bgp.routingTableModule string
router5.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router5.bgp.dataTransferMode string
router4.status.initialStatus string "UP"

TODO @signal, @statistic
router4.routingTable.forwarding bool
router4.routingTable.multicastForwarding bool
router4.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router4.pcapRecorder.verbose bool false

whether to log packets on the module output
router4.pcapRecorder.pcapFile string ""

the PCAP file to be written
router4.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router4.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router4.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router4.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router4.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router4.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router4.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router4.lo0.lo.mtu int 4470B
router4.bgp.interfaceTableModule string

The path to the InterfaceTable module
router4.bgp.routingTableModule string
router4.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router4.bgp.dataTransferMode string
router3.status.initialStatus string "UP"

TODO @signal, @statistic
router3.routingTable.forwarding bool
router3.routingTable.multicastForwarding bool
router3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router3.pcapRecorder.verbose bool false

whether to log packets on the module output
router3.pcapRecorder.pcapFile string ""

the PCAP file to be written
router3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router3.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router3.lo0.lo.mtu int 4470B
router3.bgp.interfaceTableModule string

The path to the InterfaceTable module
router3.bgp.routingTableModule string
router3.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router3.bgp.dataTransferMode string
router2.status.initialStatus string "UP"

TODO @signal, @statistic
router2.routingTable.forwarding bool
router2.routingTable.multicastForwarding bool
router2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router2.pcapRecorder.verbose bool false

whether to log packets on the module output
router2.pcapRecorder.pcapFile string ""

the PCAP file to be written
router2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router2.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router2.lo0.lo.mtu int 4470B
router2.bgp.interfaceTableModule string

The path to the InterfaceTable module
router2.bgp.routingTableModule string
router2.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router2.bgp.dataTransferMode string
router1.status.initialStatus string "UP"

TODO @signal, @statistic
router1.routingTable.forwarding bool
router1.routingTable.multicastForwarding bool
router1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
router1.pcapRecorder.verbose bool false

whether to log packets on the module output
router1.pcapRecorder.pcapFile string ""

the PCAP file to be written
router1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
router1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
router1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
router1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
router1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
router1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
router1.lo0.lo.mtu int 4470B
router1.bgp.interfaceTableModule string

The path to the InterfaceTable module
router1.bgp.routingTableModule string
router1.bgp.ospfRoutingModule string hasOSPF ? "^.ospf" : ""
router1.bgp.dataTransferMode string
client.status.initialStatus string "UP"

TODO @signal, @statistic
client.routingTable.forwarding bool
client.routingTable.multicastForwarding bool
client.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
client.pcapRecorder.verbose bool false

whether to log packets on the module output
client.pcapRecorder.pcapFile string ""

the PCAP file to be written
client.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
client.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
client.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on
client.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
client.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
client.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module
client.lo0.lo.mtu int 4470B
configurator.minLinkWeight double 1E-3
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)

Source code:

network ARPTest
{
    types:
        channel ethline extends DatarateChannel
        {
            delay = 500ns;
            datarate = 10Mbps;
        }
    submodules:
        server: StandardHost {
            @display("p=480,198;i=device/server_l");
        }
        router8: Router {
            @display("p=478,100");
        }
        router7: Router {
            @display("p=329,100");
        }
        router6: Router {
            @display("p=254,100");
        }
        bus2: EtherBus {
            positions = "";
            propagationSpeed = 2e8 mps;
            @display("p=260,40;b=260,10");
        }
        router5: Router {
            @display("p=187,98");
        }
        bus1: EtherBus {
            positions = "";
            propagationSpeed = 2e8 mps;
            @display("p=280,170;b=260,10");
        }
        router4: Router {
            @display("p=386,240");
        }
        router3: Router {
            @display("p=320,240");
        }
        router2: Router {
            @display("p=247,240");
        }
        router1: Router {
            @display("p=182,283");
        }
        client: StandardHost {
            @display("p=54,274;i=device/laptop_l");
        }
        configurator: IPv4NetworkConfigurator {
            @display("p=46,111");
        }
    connections:
        server.ethg++ <--> ethline <--> router8.ethg++;
        bus2.ethg++ <--> ethline <--> router5.ethg++;
        bus2.ethg++ <--> ethline <--> router6.ethg++;
        bus2.ethg++ <--> ethline <--> router7.ethg++;
        router8.ethg++ <--> ethline <--> router7.ethg++;
        bus1.ethg++ <--> ethline <--> router1.ethg++;
        bus1.ethg++ <--> ethline <--> router5.ethg++;
        bus1.ethg++ <--> ethline <--> router2.ethg++;
        bus1.ethg++ <--> ethline <--> router3.ethg++;
        bus1.ethg++ <--> ethline <--> router4.ethg++;
        client.ethg++ <--> ethline <--> router1.ethg++;
}

This documentation is released under the Creative Commons license