Network DiffservNetwork

Package: inet.examples.diffserv.onedomain
File: examples/diffserv/onedomain/DiffservNetwork.ned

(no description)

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Parameters:

Name	Type	Default value	Description
edgeDatarate	double
coreDatarate	double

Properties:

Name	Value	Description
isNetwork

Unassigned submodule parameters:

Name	Type	Default value	Description
H1.status.initialStatus	string	"UP"	TODO @signal, @statistic
H1.routingTable.forwarding	bool
H1.routingTable.multicastForwarding	bool
H1.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
H1.pcapRecorder.verbose	bool	false	whether to log packets on the module output
H1.pcapRecorder.pcapFile	string	""	the PCAP file to be written
H1.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
H1.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
H1.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
H1.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
H1.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
H1.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H1.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
H1.lo0.lo.mtu	int	4470B
H2.status.initialStatus	string	"UP"	TODO @signal, @statistic
H2.routingTable.forwarding	bool
H2.routingTable.multicastForwarding	bool
H2.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
H2.pcapRecorder.verbose	bool	false	whether to log packets on the module output
H2.pcapRecorder.pcapFile	string	""	the PCAP file to be written
H2.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
H2.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
H2.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
H2.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
H2.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
H2.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H2.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
H2.lo0.lo.mtu	int	4470B
R4.status.initialStatus	string	"UP"	TODO @signal, @statistic
R4.routingTable.forwarding	bool
R4.routingTable.multicastForwarding	bool
R4.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
R4.pcapRecorder.verbose	bool	false	whether to log packets on the module output
R4.pcapRecorder.pcapFile	string	""	the PCAP file to be written
R4.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
R4.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
R4.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
R4.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
R4.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
R4.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R4.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
R4.lo0.lo.mtu	int	4470B
R4.bgp.interfaceTableModule	string		The path to the InterfaceTable module
R4.bgp.routingTableModule	string
R4.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
R4.bgp.dataTransferMode	string
R2.status.initialStatus	string	"UP"	TODO @signal, @statistic
R2.routingTable.forwarding	bool
R2.routingTable.multicastForwarding	bool
R2.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
R2.pcapRecorder.verbose	bool	false	whether to log packets on the module output
R2.pcapRecorder.pcapFile	string	""	the PCAP file to be written
R2.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
R2.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
R2.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
R2.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
R2.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
R2.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R2.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
R2.lo0.lo.mtu	int	4470B
R2.bgp.interfaceTableModule	string		The path to the InterfaceTable module
R2.bgp.routingTableModule	string
R2.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
R2.bgp.dataTransferMode	string
R1.status.initialStatus	string	"UP"	TODO @signal, @statistic
R1.routingTable.forwarding	bool
R1.routingTable.multicastForwarding	bool
R1.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
R1.pcapRecorder.verbose	bool	false	whether to log packets on the module output
R1.pcapRecorder.pcapFile	string	""	the PCAP file to be written
R1.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
R1.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
R1.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
R1.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
R1.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
R1.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R1.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
R1.lo0.lo.mtu	int	4470B
R1.bgp.interfaceTableModule	string		The path to the InterfaceTable module
R1.bgp.routingTableModule	string
R1.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
R1.bgp.dataTransferMode	string
R3.status.initialStatus	string	"UP"	TODO @signal, @statistic
R3.routingTable.forwarding	bool
R3.routingTable.multicastForwarding	bool
R3.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
R3.pcapRecorder.verbose	bool	false	whether to log packets on the module output
R3.pcapRecorder.pcapFile	string	""	the PCAP file to be written
R3.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
R3.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
R3.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
R3.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
R3.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
R3.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R3.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
R3.lo0.lo.mtu	int	4470B
R3.bgp.interfaceTableModule	string		The path to the InterfaceTable module
R3.bgp.routingTableModule	string
R3.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
R3.bgp.dataTransferMode	string
R5.status.initialStatus	string	"UP"	TODO @signal, @statistic
R5.routingTable.forwarding	bool
R5.routingTable.multicastForwarding	bool
R5.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
R5.pcapRecorder.verbose	bool	false	whether to log packets on the module output
R5.pcapRecorder.pcapFile	string	""	the PCAP file to be written
R5.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
R5.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
R5.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
R5.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
R5.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
R5.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R5.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
R5.lo0.lo.mtu	int	4470B
R5.bgp.interfaceTableModule	string		The path to the InterfaceTable module
R5.bgp.routingTableModule	string
R5.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
R5.bgp.dataTransferMode	string
R0.status.initialStatus	string	"UP"	TODO @signal, @statistic
R0.routingTable.forwarding	bool
R0.routingTable.multicastForwarding	bool
R0.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
R0.pcapRecorder.verbose	bool	false	whether to log packets on the module output
R0.pcapRecorder.pcapFile	string	""	the PCAP file to be written
R0.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
R0.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
R0.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
R0.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
R0.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
R0.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
R0.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
R0.lo0.lo.mtu	int	4470B
R0.bgp.interfaceTableModule	string		The path to the InterfaceTable module
R0.bgp.routingTableModule	string
R0.bgp.ospfRoutingModule	string	hasOSPF ? "^.ospf" : ""
R0.bgp.dataTransferMode	string
H5.status.initialStatus	string	"UP"	TODO @signal, @statistic
H5.routingTable.forwarding	bool
H5.routingTable.multicastForwarding	bool
H5.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
H5.pcapRecorder.verbose	bool	false	whether to log packets on the module output
H5.pcapRecorder.pcapFile	string	""	the PCAP file to be written
H5.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
H5.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
H5.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
H5.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
H5.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
H5.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H5.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
H5.lo0.lo.mtu	int	4470B
H6.status.initialStatus	string	"UP"	TODO @signal, @statistic
H6.routingTable.forwarding	bool
H6.routingTable.multicastForwarding	bool
H6.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
H6.pcapRecorder.verbose	bool	false	whether to log packets on the module output
H6.pcapRecorder.pcapFile	string	""	the PCAP file to be written
H6.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
H6.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
H6.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
H6.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
H6.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
H6.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H6.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
H6.lo0.lo.mtu	int	4470B
H7.status.initialStatus	string	"UP"	TODO @signal, @statistic
H7.routingTable.forwarding	bool
H7.routingTable.multicastForwarding	bool
H7.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
H7.pcapRecorder.verbose	bool	false	whether to log packets on the module output
H7.pcapRecorder.pcapFile	string	""	the PCAP file to be written
H7.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
H7.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
H7.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
H7.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
H7.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
H7.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H7.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
H7.lo0.lo.mtu	int	4470B
H8.status.initialStatus	string	"UP"	TODO @signal, @statistic
H8.routingTable.forwarding	bool
H8.routingTable.multicastForwarding	bool
H8.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
H8.pcapRecorder.verbose	bool	false	whether to log packets on the module output
H8.pcapRecorder.pcapFile	string	""	the PCAP file to be written
H8.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
H8.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
H8.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
H8.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
H8.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
H8.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H8.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
H8.lo0.lo.mtu	int	4470B
H3.status.initialStatus	string	"UP"	TODO @signal, @statistic
H3.routingTable.forwarding	bool
H3.routingTable.multicastForwarding	bool
H3.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
H3.pcapRecorder.verbose	bool	false	whether to log packets on the module output
H3.pcapRecorder.pcapFile	string	""	the PCAP file to be written
H3.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
H3.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
H3.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
H3.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
H3.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
H3.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H3.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
H3.lo0.lo.mtu	int	4470B
H4.status.initialStatus	string	"UP"	TODO @signal, @statistic
H4.routingTable.forwarding	bool
H4.routingTable.multicastForwarding	bool
H4.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
H4.pcapRecorder.verbose	bool	false	whether to log packets on the module output
H4.pcapRecorder.pcapFile	string	""	the PCAP file to be written
H4.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
H4.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
H4.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
H4.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
H4.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
H4.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
H4.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
H4.lo0.lo.mtu	int	4470B
configurator.minLinkWeight	double	1E-3
configurator.config	xml	xml("")	XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses	bool	true	assign IP addresses to all interfaces in the network
configurator.assignDisjunctSubnetAddresses	bool	true	avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes	bool	true	add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes	bool	true	add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes	bool	true	add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.optimizeRoutes	bool	true	optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology	bool	false	print extracted network topology to the module output
configurator.dumpLinks	bool	false	print recognized network links to the module output
configurator.dumpAddresses	bool	false	print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes	bool	false	print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig	string	""	write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)

Source code:

network DiffservNetwork
{
    parameters:
        double edgeDatarate @unit(bps);
        double coreDatarate @unit(bps);
    types:
        channel edgeline extends ThruputMeteringChannel
        {
            delay = 2ms;
            datarate = edgeDatarate;
            thruputDisplayFormat = "b B U";
        }
        channel coreline extends ThruputMeteringChannel
        {
            delay = 2ms;
            datarate = coreDatarate;
            thruputDisplayFormat = "b B U";
        }
        channel ethernetline extends ThruputMeteringChannel
        {
            delay = 0.1us;
            datarate = 100Mbps;
            thruputDisplayFormat = "b B U";
        }
    submodules:
        H1: StandardHost {
            @display("p=46,43");
        }
        H2: StandardHost {
            @display("p=46,143");
        }
        R4: Router {
            @display("p=473,108");
        }
        R2: Router {
            @display("p=237,178");
        }
        R1: Router {
            @display("p=156,263");
        }
        R3: Router {
            @display("p=390,178");
        }
        R5: Router {
            @display("p=473,263");
        }
        R0: Router {
            @display("p=156,108");
        }
        H5: StandardHost {
            @display("p=570,59");
        }
        H6: StandardHost {
            @display("p=570,150");
        }
        H7: StandardHost {
            @display("p=571,250");
        }
        H8: StandardHost {
            @display("p=571,350");
        }
        H3: StandardHost {
            @display("p=41,240");
        }
        H4: StandardHost {
            @display("p=42,346");
        }
        configurator: IPv4NetworkConfigurator {
            @display("p=300,24");
        }
    connections:
        H1.ethg++ <--> ethernetline <--> R0.ethg++;
        H2.ethg++ <--> ethernetline <--> R0.ethg++;
        H3.ethg++ <--> ethernetline <--> R1.ethg++;
        H4.ethg++ <--> ethernetline <--> R1.ethg++;
        H5.ethg++ <--> ethernetline <--> R4.ethg++;
        H6.ethg++ <--> ethernetline <--> R4.ethg++;
        H7.ethg++ <--> ethernetline <--> R5.ethg++;
        H8.ethg++ <--> ethernetline <--> R5.ethg++;
        R0.pppg++ <--> edgeline <--> R2.pppg++;
        R1.pppg++ <--> edgeline <--> R2.pppg++;
        R2.pppg++ <--> coreline <--> R3.pppg++;
        R4.pppg++ <--> coreline <--> R3.pppg++;
        R5.pppg++ <--> coreline <--> R3.pppg++;
}