PacketDropNoRouteToDestinationShowcase

Package: inet.showcases.visualizer.canvas.packetdrop

PacketDropNoRouteToDestinationShowcase

network

(no description)

configurator : Ipv4NetworkConfigurator Assigns IPv4 addresses and sets up static routing for an IPv4 network. Source: configurator: Ipv4NetworkConfigurator { @display("p=60,40"); } visualizer : IntegratedCanvasVisualizer Integrates all canvas visualizers into a single module. Source: visualizer: IntegratedCanvasVisualizer { @display("p=60,101"); } host1 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: host1: StandardHost { @display("p=110,223"); } host2 : StandardHost A comprehensive model of an IPv4/IPv6 host that provides a complete network stack with configurable... Source: host2: StandardHost { @display("p=269,223"); }

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork
display bgb=400,400

Unassigned submodule parameters

Name Type Default value Description
configurator.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.updateRoutes bool false

Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology bool false

Print extracted network topology to the module output
configurator.dumpLinks bool false

Print recognized network links to the module output
configurator.dumpAddresses bool false

Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
visualizer.sceneVisualizer.visualizationTargetModule string
visualizer.sceneVisualizer.visualizationSubjectModule string
visualizer.physicalEnvironmentVisualizer.visualizationTargetModule string
visualizer.physicalEnvironmentVisualizer.visualizationSubjectModule string
visualizer.networkNodeVisualizer.visualizationTargetModule string
visualizer.networkNodeVisualizer.visualizationSubjectModule string
visualizer.networkConnectionVisualizer.visualizationTargetModule string
visualizer.networkConnectionVisualizer.visualizationSubjectModule string
visualizer.mobilityVisualizer.visualizationTargetModule string
visualizer.mobilityVisualizer.visualizationSubjectModule string
visualizer.statisticVisualizer.visualizationTargetModule string
visualizer.statisticVisualizer.visualizationSubjectModule string
visualizer.infoVisualizer.visualizationTargetModule string
visualizer.infoVisualizer.visualizationSubjectModule string
visualizer.energyStorageVisualizer.visualizationTargetModule string
visualizer.energyStorageVisualizer.visualizationSubjectModule string
visualizer.mediumVisualizer.visualizationTargetModule string
visualizer.mediumVisualizer.visualizationSubjectModule string
visualizer.obstacleLossVisualizer.visualizationTargetModule string
visualizer.obstacleLossVisualizer.visualizationSubjectModule string
visualizer.packetDropVisualizer.visualizationTargetModule string
visualizer.packetDropVisualizer.visualizationSubjectModule string
visualizer.packetFlowVisualizer.visualizationTargetModule string
visualizer.packetFlowVisualizer.visualizationSubjectModule string
visualizer.queueVisualizer.visualizationTargetModule string
visualizer.queueVisualizer.visualizationSubjectModule string
visualizer.gateScheduleVisualizer.visualizationTargetModule string
visualizer.gateScheduleVisualizer.visualizationSubjectModule string
visualizer.radioVisualizer.visualizationTargetModule string
visualizer.radioVisualizer.visualizationSubjectModule string
visualizer.physicalLinkVisualizer.visualizationTargetModule string
visualizer.physicalLinkVisualizer.visualizationSubjectModule string
visualizer.interfaceTableVisualizer.visualizationTargetModule string
visualizer.interfaceTableVisualizer.visualizationSubjectModule string
visualizer.dataLinkVisualizer.visualizationTargetModule string
visualizer.dataLinkVisualizer.visualizationSubjectModule string
visualizer.linkBreakVisualizer.visualizationTargetModule string
visualizer.linkBreakVisualizer.visualizationSubjectModule string
visualizer.ieee80211Visualizer.visualizationTargetModule string
visualizer.ieee80211Visualizer.visualizationSubjectModule string
visualizer.networkRouteVisualizer.visualizationTargetModule string
visualizer.networkRouteVisualizer.visualizationSubjectModule string
visualizer.routingTableVisualizer.visualizationTargetModule string
visualizer.routingTableVisualizer.visualizationSubjectModule string
visualizer.transportRouteVisualizer.visualizationTargetModule string
visualizer.transportRouteVisualizer.visualizationSubjectModule string
visualizer.transportConnectionVisualizer.visualizationTargetModule string
visualizer.transportConnectionVisualizer.visualizationSubjectModule string
visualizer.failureProtectionConfigurationVisualizer.visualizationTargetModule string
visualizer.failureProtectionConfigurationVisualizer.visualizationSubjectModule string
visualizer.streamRedundancyConfigurationVisualizer.visualizationTargetModule string
visualizer.streamRedundancyConfigurationVisualizer.visualizationSubjectModule string
host1.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.status.initialStatus string "UP"

TODO @signal, @statistic
host1.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.environment.initStage int 0

Initialization stage for the setup command
host1.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
host1.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
host1.environment.setupCommand string ""

A host OS system command
host1.environment.teardownCommand string ""

A host OS system command
host1.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.pcapRecorder.verbose bool true

Whether to log packets on the module output
host1.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
host1.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
host1.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
host1.pcapRecorder.fileFormat string "pcapng"
host1.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
host1.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
host1.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
host1.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
host1.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
host1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
host1.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
host1.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host1.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host1.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
host1.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.cb.forwardServiceRegistration bool true
host1.cb.forwardProtocolRegistration bool true
host1.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.bl.forwardServiceRegistration bool true
host1.bl.forwardProtocolRegistration bool true
host1.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.li.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.li.forwardServiceRegistration bool true
host1.li.forwardProtocolRegistration bool true
host1.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.eth.bitrate double
host1.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.nl.forwardServiceRegistration bool true
host1.nl.forwardProtocolRegistration bool true
host1.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.tn.forwardServiceRegistration bool true
host1.tn.forwardProtocolRegistration bool true
host1.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host1.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host1.at.interfaceTableModule string

Module path to the ~InterfaceTable module
host1.at.forwardServiceRegistration bool true
host1.at.forwardProtocolRegistration bool true
host1.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host1.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host1.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.status.initialStatus string "UP"

TODO @signal, @statistic
host2.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.environment.initStage int 0

Initialization stage for the setup command
host2.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
host2.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
host2.environment.setupCommand string ""

A host OS system command
host2.environment.teardownCommand string ""

A host OS system command
host2.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.pcapRecorder.verbose bool true

Whether to log packets on the module output
host2.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
host2.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
host2.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
host2.pcapRecorder.fileFormat string "pcapng"
host2.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
host2.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
host2.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
host2.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
host2.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
host2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
host2.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
host2.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host2.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host2.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
host2.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.cb.forwardServiceRegistration bool true
host2.cb.forwardProtocolRegistration bool true
host2.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.bl.forwardServiceRegistration bool true
host2.bl.forwardProtocolRegistration bool true
host2.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.li.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.li.forwardServiceRegistration bool true
host2.li.forwardProtocolRegistration bool true
host2.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.eth.bitrate double
host2.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.nl.forwardServiceRegistration bool true
host2.nl.forwardProtocolRegistration bool true
host2.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.tn.forwardServiceRegistration bool true
host2.tn.forwardProtocolRegistration bool true
host2.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host2.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host2.at.interfaceTableModule string

Module path to the ~InterfaceTable module
host2.at.forwardServiceRegistration bool true
host2.at.forwardProtocolRegistration bool true
host2.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host2.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host2.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default

Source code

network PacketDropNoRouteToDestinationShowcase
{
    @display("bgb=400,400");
    submodules:
        configurator: Ipv4NetworkConfigurator {
            @display("p=60,40");
        }
        visualizer: IntegratedCanvasVisualizer {
            @display("p=60,101");
        }
        host1: StandardHost {
            @display("p=110,223");
        }
        host2: StandardHost {
            @display("p=269,223");
        }
    connections:
        host1.ethg++ <--> Eth100M <--> host2.ethg++;
}
File: showcases/visualizer/canvas/packetdrop/PacketDropVisualizationShowcase.ned

This documentation is released under the Creative Commons license