Lan80211ac

Package: inet.examples.wireless.lan80211ac

Lan80211ac

network

(no description)

visualizer : like IIntegratedVisualizer IIntegratedVisualizer: Interface allows configuring different ~IIntegratedVisualizer submodules from INI files. Source: visualizer: <default(firstAvailableOrEmpty("IntegratedCanvasVisualizer"))> like IIntegratedVisualizer if typename != "" { parameters: @display("p=100,300;is=s"); } configurator : Ipv4NetworkConfigurator Assigns IPv4 addresses and sets up static routing for an IPv4 network. Source: configurator: Ipv4NetworkConfigurator { parameters: @display("p=100,100;is=s"); config = xml("<config><interface hosts='*' address='145.236.x.x' netmask='255.255.0.0'/></config>"); } radioMedium : Ieee80211ScalarRadioMedium This radio medium model uses scalar transmission power in the analog representation. Source: radioMedium: Ieee80211ScalarRadioMedium { parameters: @display("p=100,200;is=s"); } host[numHosts] : WirelessHost A mobile device with wireless connectivity operating in infrastructure mode. Source: host[numHosts]: WirelessHost { @display("r=,,#707070"); wlan[*].mgmt.typename = "Ieee80211MgmtStaSimplified"; wlan[*].agent.typename = ""; } ap : AccessPoint A wireless access point device that connects wireless stations (like WirelessHost) to a wired... Source: ap: AccessPoint { @display("p=250,200;r=,,#707070"); wlan[*].mgmt.typename = "Ieee80211MgmtApSimplified"; }

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Parameters

Name Type Default value Description
numHosts int

Properties

Name Value Description
isNetwork

Unassigned submodule parameters

Name Type Default value Description
configurator.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.assignAddresses bool true

Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.updateRoutes bool false

Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology bool false

Print extracted network topology to the module output
configurator.dumpLinks bool false

Print recognized network links to the module output
configurator.dumpAddresses bool false

Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
radioMedium.neighborCache.refillPeriod double
host.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.status.initialStatus string "UP"

TODO @signal, @statistic
host.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.environment.initStage int 0

Initialization stage for the setup command
host.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
host.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
host.environment.setupCommand string ""

A host OS system command
host.environment.teardownCommand string ""

A host OS system command
host.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.pcapRecorder.verbose bool true

Whether to log packets on the module output
host.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
host.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
host.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
host.pcapRecorder.fileFormat string "pcapng"
host.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
host.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
host.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
host.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
host.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
host.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
host.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
host.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
host.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
host.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
host.cb.forwardServiceRegistration bool true
host.cb.forwardProtocolRegistration bool true
host.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
host.bl.forwardServiceRegistration bool true
host.bl.forwardProtocolRegistration bool true
host.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.li.interfaceTableModule string

Module path to the ~InterfaceTable module
host.li.forwardServiceRegistration bool true
host.li.forwardProtocolRegistration bool true
host.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host.eth.bitrate double
host.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
host.nl.forwardServiceRegistration bool true
host.nl.forwardProtocolRegistration bool true
host.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
host.tn.forwardServiceRegistration bool true
host.tn.forwardProtocolRegistration bool true
host.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
host.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
host.at.interfaceTableModule string

Module path to the ~InterfaceTable module
host.at.forwardServiceRegistration bool true
host.at.forwardProtocolRegistration bool true
host.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
host.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
host.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ap.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ap.status.initialStatus string "UP"

TODO @signal, @statistic
ap.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ap.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
ap.macTable.agingTime double
ap.macTable.forwardingTableFile string
ap.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ap.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
ap.bl.forwardServiceRegistration bool true
ap.bl.forwardProtocolRegistration bool true
ap.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ap.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ap.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ap.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ap.li.interfaceTableModule string

Module path to the ~InterfaceTable module
ap.li.forwardServiceRegistration bool true
ap.li.forwardProtocolRegistration bool true
ap.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ap.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ap.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ap.eth.bitrate double

Source code

network Lan80211ac
{
    parameters:
        int numHosts;
        **.mgmt.numChannels = 2;
    submodules:
        visualizer: <default(firstAvailableOrEmpty("IntegratedCanvasVisualizer"))> like IIntegratedVisualizer if typename != "" {
            parameters:
                @display("p=100,300;is=s");
        }
        configurator: Ipv4NetworkConfigurator {
            parameters:
                @display("p=100,100;is=s");
                config = xml("<config><interface hosts='*' address='145.236.x.x' netmask='255.255.0.0'/></config>");
        }
        radioMedium: Ieee80211ScalarRadioMedium {
            parameters:
                @display("p=100,200;is=s");
        }
        host[numHosts]: WirelessHost {
            @display("r=,,#707070");
            wlan[*].mgmt.typename = "Ieee80211MgmtStaSimplified";
            wlan[*].agent.typename = "";
        }
        ap: AccessPoint {
            @display("p=250,200;r=,,#707070");
            wlan[*].mgmt.typename = "Ieee80211MgmtApSimplified";
        }
}
File: examples/wireless/lan80211ac/Lan80211.ned

This documentation is released under the Creative Commons license