Crosstalk

Package: inet.examples.wireless.crosstalk

Crosstalk

network

(no description)

visualizer : like IIntegratedVisualizer IIntegratedVisualizer: Interface allows configuring different ~IIntegratedVisualizer submodules from INI files. Source: visualizer: <default(firstAvailableOrEmpty("IntegratedCanvasVisualizer"))> like IIntegratedVisualizer if typename != "" { parameters: @display("p=100,300;is=s"); } configurator : Ipv4NetworkConfigurator Assigns IPv4 addresses and sets up static routing for an IPv4 network. Source: configurator: Ipv4NetworkConfigurator { parameters: @display("p=100,100;is=s"); } radioMedium : Ieee80211DimensionalRadioMedium This radio medium model uses dimensional transmission power (that changes over time and/or... Source: radioMedium: Ieee80211DimensionalRadioMedium { parameters: @display("p=100,200;is=s"); } aNode[2] : AdhocHost A mobile wireless node that participates in ad hoc networks without centralized infrastructure. Source: aNode[2]: AdhocHost { parameters: @display("r=,,#707070;p=400,200"); } bNode[2] : AdhocHost A mobile wireless node that participates in ad hoc networks without centralized infrastructure. Source: bNode[2]: AdhocHost { parameters: @display("r=,,#707070;p=250,200"); }

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork

Unassigned submodule parameters

Name Type Default value Description
configurator.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.updateRoutes bool false

Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology bool false

Print extracted network topology to the module output
configurator.dumpLinks bool false

Print recognized network links to the module output
configurator.dumpAddresses bool false

Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
radioMedium.neighborCache.refillPeriod double
aNode.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.status.initialStatus string "UP"

TODO @signal, @statistic
aNode.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.environment.initStage int 0

Initialization stage for the setup command
aNode.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
aNode.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
aNode.environment.setupCommand string ""

A host OS system command
aNode.environment.teardownCommand string ""

A host OS system command
aNode.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.pcapRecorder.verbose bool true

Whether to log packets on the module output
aNode.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
aNode.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
aNode.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
aNode.pcapRecorder.fileFormat string "pcapng"
aNode.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
aNode.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
aNode.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
aNode.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
aNode.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
aNode.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
aNode.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
aNode.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
aNode.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
aNode.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
aNode.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
aNode.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
aNode.cb.forwardServiceRegistration bool true
aNode.cb.forwardProtocolRegistration bool true
aNode.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
aNode.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
aNode.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
aNode.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
aNode.bl.forwardServiceRegistration bool true
aNode.bl.forwardProtocolRegistration bool true
aNode.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
aNode.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
aNode.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
aNode.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.li.interfaceTableModule string

Module path to the ~InterfaceTable module
aNode.li.forwardServiceRegistration bool true
aNode.li.forwardProtocolRegistration bool true
aNode.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
aNode.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
aNode.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
aNode.eth.bitrate double
aNode.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
aNode.nl.forwardServiceRegistration bool true
aNode.nl.forwardProtocolRegistration bool true
aNode.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
aNode.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
aNode.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
aNode.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
aNode.tn.forwardServiceRegistration bool true
aNode.tn.forwardProtocolRegistration bool true
aNode.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
aNode.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
aNode.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
aNode.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
aNode.at.interfaceTableModule string

Module path to the ~InterfaceTable module
aNode.at.forwardServiceRegistration bool true
aNode.at.forwardProtocolRegistration bool true
aNode.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
aNode.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
aNode.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
bNode.status.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.status.initialStatus string "UP"

TODO @signal, @statistic
bNode.environment.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.environment.initStage int 0

Initialization stage for the setup command
bNode.environment.globalNamespace bool false

Create new network namespaces under /var/run/netns/ (Linux only)
bNode.environment.namespace string ""

Name of the host OS network namespace (optional) (Linux only)
bNode.environment.setupCommand string ""

A host OS system command
bNode.environment.teardownCommand string ""

A host OS system command
bNode.pcapRecorder.displayStringTextFormat string "rec: %n pks"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.pcapRecorder.verbose bool true

Whether to log packets on the module output
bNode.pcapRecorder.recordEmptyPackets bool true

Specifies if zero length packets are recorded or not
bNode.pcapRecorder.enableConvertingPackets bool true

Specifies if converting packets to link type is allowed or not
bNode.pcapRecorder.pcapFile string ""

The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
bNode.pcapRecorder.fileFormat string "pcapng"
bNode.pcapRecorder.snaplen int 65535

Maximum number of bytes to record per packet
bNode.pcapRecorder.timePrecision int 6

Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
bNode.pcapRecorder.dumpBadFrames bool true

Enable dump of frames with hasBitError
bNode.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

Space-separated list of sibling module names to listen on
bNode.pcapRecorder.sendingSignalNames string "transmissionEnded"

Space-separated list of outbound packet signals to subscribe to
bNode.pcapRecorder.receivingSignalNames string "receptionEnded"

Space-separated list of inbound packet signals to subscribe to
bNode.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

Space-separated list of protocol names as defined in the Protocol class
bNode.pcapRecorder.packetFilter object "*"

Which packets are considered, matches all packets by default
bNode.pcapRecorder.helpers string ""

Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
bNode.pcapRecorder.alwaysFlush bool false

Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
bNode.interfaceTable.displayStringTextFormat string ""

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.interfaceTable.displayAddresses bool false

Whether to display IP addresses on links
bNode.cb.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.cb.interfaceTableModule string

Module path to the ~InterfaceTable module
bNode.cb.forwardServiceRegistration bool true
bNode.cb.forwardProtocolRegistration bool true
bNode.cb.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
bNode.cb.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
bNode.cb.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
bNode.bl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.bl.interfaceTableModule string

Module path to the ~InterfaceTable module
bNode.bl.forwardServiceRegistration bool true
bNode.bl.forwardProtocolRegistration bool true
bNode.bl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
bNode.bl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
bNode.bl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
bNode.li.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.li.interfaceTableModule string

Module path to the ~InterfaceTable module
bNode.li.forwardServiceRegistration bool true
bNode.li.forwardProtocolRegistration bool true
bNode.li.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
bNode.li.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
bNode.li.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
bNode.eth.bitrate double
bNode.nl.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.nl.interfaceTableModule string

Module path to the ~InterfaceTable module
bNode.nl.forwardServiceRegistration bool true
bNode.nl.forwardProtocolRegistration bool true
bNode.nl.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
bNode.nl.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
bNode.nl.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
bNode.tn.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.tn.interfaceTableModule string

Module path to the ~InterfaceTable module
bNode.tn.forwardServiceRegistration bool true
bNode.tn.forwardProtocolRegistration bool true
bNode.tn.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
bNode.tn.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
bNode.tn.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
bNode.at.displayStringTextFormat string "processed %p pk (%l)"

Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
bNode.at.interfaceTableModule string

Module path to the ~InterfaceTable module
bNode.at.forwardServiceRegistration bool true
bNode.at.forwardProtocolRegistration bool true
bNode.at.interfaceMapping object {}

Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
bNode.at.serviceMapping object {}

Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
bNode.at.protocolMapping object {}

Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default

Source code

network Crosstalk
{
    parameters:
    submodules:
        visualizer: <default(firstAvailableOrEmpty("IntegratedCanvasVisualizer"))> like IIntegratedVisualizer if typename != "" {
            parameters:
                @display("p=100,300;is=s");
        }
        configurator: Ipv4NetworkConfigurator {
            parameters:
                @display("p=100,100;is=s");
        }
        radioMedium: Ieee80211DimensionalRadioMedium {
            parameters:
                @display("p=100,200;is=s");
        }
        aNode[2]: AdhocHost {
            parameters:
                @display("r=,,#707070;p=400,200");
        }
        bNode[2]: AdhocHost {
            parameters:
                @display("r=,,#707070;p=250,200");
        }
}
File: examples/wireless/crosstalk/Crosstalk.ned

This documentation is released under the Creative Commons license