Package: inet.examples.manetrouting.gpsr
GPSRNetworkManual
network(no description)
Usage diagram
The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.
Properties
| Name | Value | Description |
|---|---|---|
| isNetwork |
Unassigned submodule parameters
| Name | Type | Default value | Description |
|---|---|---|---|
| radioMedium.neighborCache.refillPeriod | double | ||
| configurator.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| configurator.minLinkWeight | double | 1E-3 | |
| configurator.configureIsolatedNetworksSeparatly | bool | false | |
| configurator.assignAddresses | bool | true |
Assign IP addresses to all interfaces in the network |
| configurator.assignUniqueAddresses | bool | true |
Avoid using the same address and raise an error if not possible |
| configurator.assignDisjunctSubnetAddresses | bool | true |
Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces |
| configurator.addStaticRoutes | bool | true |
Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes) |
| configurator.addDefaultRoutes | bool | true |
Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true) |
| configurator.addSubnetRoutes | bool | true |
Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true) |
| configurator.addDirectRoutes | bool | true |
Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true) |
| configurator.optimizeRoutes | bool | true |
Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true) |
| configurator.updateRoutes | bool | false |
Recalculate static routes if an interface goes down/up or a carrier is lost/back |
| configurator.dumpTopology | bool | false |
Print extracted network topology to the module output |
| configurator.dumpLinks | bool | false |
Print recognized network links to the module output |
| configurator.dumpAddresses | bool | false |
Print assigned IP addresses for all interfaces to the module output |
| configurator.dumpRoutes | bool | false |
Print configured and optimized routing tables for all nodes to the module output |
| configurator.dumpConfig | string | "" |
Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations) |
| routingTableRecorder.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| routingTableRecorder.enabled | bool | true | |
| routingTableRecorder.logfile | string | "${resultdir}/${configname}-#${runnumber}.rt" | |
| host0.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host0.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host0.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host0.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host0.environment.setupCommand | string | "" |
A host OS system command |
| host0.environment.teardownCommand | string | "" |
A host OS system command |
| host0.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host0.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host0.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host0.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host0.pcapRecorder.fileFormat | string | "pcapng" | |
| host0.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host0.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host0.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host0.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host0.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host0.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host0.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host0.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host0.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host0.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host0.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host0.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host0.cb.forwardServiceRegistration | bool | true | |
| host0.cb.forwardProtocolRegistration | bool | true | |
| host0.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host0.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host0.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host0.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host0.bl.forwardServiceRegistration | bool | true | |
| host0.bl.forwardProtocolRegistration | bool | true | |
| host0.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host0.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host0.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host0.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host0.li.forwardServiceRegistration | bool | true | |
| host0.li.forwardProtocolRegistration | bool | true | |
| host0.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host0.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host0.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host0.eth.bitrate | double | ||
| host0.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host0.nl.forwardServiceRegistration | bool | true | |
| host0.nl.forwardProtocolRegistration | bool | true | |
| host0.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host0.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host0.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host0.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host0.tn.forwardServiceRegistration | bool | true | |
| host0.tn.forwardProtocolRegistration | bool | true | |
| host0.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host0.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host0.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host0.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host0.at.forwardServiceRegistration | bool | true | |
| host0.at.forwardProtocolRegistration | bool | true | |
| host0.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host0.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host0.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host0.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host0.gpsr.interfaceTableModule | string |
context parameters |
|
| host0.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host0.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host0.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host0.gpsr.interfaces | string | "*" | |
| host0.gpsr.beaconInterval | double | 10s | |
| host0.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host0.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host0.gpsr.positionByteLength | int | 2 * 4B | |
| host0.gpsr.displayBubbles | bool | false |
visualization parameters |
| host1.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host1.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host1.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host1.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host1.environment.setupCommand | string | "" |
A host OS system command |
| host1.environment.teardownCommand | string | "" |
A host OS system command |
| host1.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host1.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host1.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host1.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host1.pcapRecorder.fileFormat | string | "pcapng" | |
| host1.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host1.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host1.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host1.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host1.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host1.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host1.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host1.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host1.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host1.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host1.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host1.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host1.cb.forwardServiceRegistration | bool | true | |
| host1.cb.forwardProtocolRegistration | bool | true | |
| host1.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host1.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host1.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host1.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host1.bl.forwardServiceRegistration | bool | true | |
| host1.bl.forwardProtocolRegistration | bool | true | |
| host1.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host1.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host1.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host1.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host1.li.forwardServiceRegistration | bool | true | |
| host1.li.forwardProtocolRegistration | bool | true | |
| host1.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host1.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host1.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host1.eth.bitrate | double | ||
| host1.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host1.nl.forwardServiceRegistration | bool | true | |
| host1.nl.forwardProtocolRegistration | bool | true | |
| host1.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host1.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host1.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host1.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host1.tn.forwardServiceRegistration | bool | true | |
| host1.tn.forwardProtocolRegistration | bool | true | |
| host1.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host1.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host1.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host1.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host1.at.forwardServiceRegistration | bool | true | |
| host1.at.forwardProtocolRegistration | bool | true | |
| host1.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host1.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host1.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host1.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host1.gpsr.interfaceTableModule | string |
context parameters |
|
| host1.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host1.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host1.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host1.gpsr.interfaces | string | "*" | |
| host1.gpsr.beaconInterval | double | 10s | |
| host1.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host1.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host1.gpsr.positionByteLength | int | 2 * 4B | |
| host1.gpsr.displayBubbles | bool | false |
visualization parameters |
| host2.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host2.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host2.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host2.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host2.environment.setupCommand | string | "" |
A host OS system command |
| host2.environment.teardownCommand | string | "" |
A host OS system command |
| host2.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host2.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host2.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host2.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host2.pcapRecorder.fileFormat | string | "pcapng" | |
| host2.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host2.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host2.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host2.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host2.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host2.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host2.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host2.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host2.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host2.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host2.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host2.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host2.cb.forwardServiceRegistration | bool | true | |
| host2.cb.forwardProtocolRegistration | bool | true | |
| host2.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host2.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host2.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host2.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host2.bl.forwardServiceRegistration | bool | true | |
| host2.bl.forwardProtocolRegistration | bool | true | |
| host2.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host2.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host2.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host2.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host2.li.forwardServiceRegistration | bool | true | |
| host2.li.forwardProtocolRegistration | bool | true | |
| host2.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host2.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host2.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host2.eth.bitrate | double | ||
| host2.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host2.nl.forwardServiceRegistration | bool | true | |
| host2.nl.forwardProtocolRegistration | bool | true | |
| host2.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host2.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host2.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host2.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host2.tn.forwardServiceRegistration | bool | true | |
| host2.tn.forwardProtocolRegistration | bool | true | |
| host2.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host2.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host2.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host2.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host2.at.forwardServiceRegistration | bool | true | |
| host2.at.forwardProtocolRegistration | bool | true | |
| host2.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host2.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host2.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host2.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host2.gpsr.interfaceTableModule | string |
context parameters |
|
| host2.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host2.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host2.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host2.gpsr.interfaces | string | "*" | |
| host2.gpsr.beaconInterval | double | 10s | |
| host2.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host2.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host2.gpsr.positionByteLength | int | 2 * 4B | |
| host2.gpsr.displayBubbles | bool | false |
visualization parameters |
| host3.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host3.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host3.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host3.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host3.environment.setupCommand | string | "" |
A host OS system command |
| host3.environment.teardownCommand | string | "" |
A host OS system command |
| host3.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host3.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host3.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host3.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host3.pcapRecorder.fileFormat | string | "pcapng" | |
| host3.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host3.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host3.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host3.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host3.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host3.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host3.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host3.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host3.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host3.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host3.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host3.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host3.cb.forwardServiceRegistration | bool | true | |
| host3.cb.forwardProtocolRegistration | bool | true | |
| host3.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host3.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host3.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host3.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host3.bl.forwardServiceRegistration | bool | true | |
| host3.bl.forwardProtocolRegistration | bool | true | |
| host3.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host3.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host3.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host3.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host3.li.forwardServiceRegistration | bool | true | |
| host3.li.forwardProtocolRegistration | bool | true | |
| host3.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host3.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host3.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host3.eth.bitrate | double | ||
| host3.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host3.nl.forwardServiceRegistration | bool | true | |
| host3.nl.forwardProtocolRegistration | bool | true | |
| host3.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host3.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host3.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host3.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host3.tn.forwardServiceRegistration | bool | true | |
| host3.tn.forwardProtocolRegistration | bool | true | |
| host3.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host3.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host3.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host3.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host3.at.forwardServiceRegistration | bool | true | |
| host3.at.forwardProtocolRegistration | bool | true | |
| host3.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host3.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host3.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host3.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host3.gpsr.interfaceTableModule | string |
context parameters |
|
| host3.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host3.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host3.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host3.gpsr.interfaces | string | "*" | |
| host3.gpsr.beaconInterval | double | 10s | |
| host3.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host3.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host3.gpsr.positionByteLength | int | 2 * 4B | |
| host3.gpsr.displayBubbles | bool | false |
visualization parameters |
| host4.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host4.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host4.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host4.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host4.environment.setupCommand | string | "" |
A host OS system command |
| host4.environment.teardownCommand | string | "" |
A host OS system command |
| host4.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host4.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host4.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host4.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host4.pcapRecorder.fileFormat | string | "pcapng" | |
| host4.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host4.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host4.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host4.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host4.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host4.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host4.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host4.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host4.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host4.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host4.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host4.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host4.cb.forwardServiceRegistration | bool | true | |
| host4.cb.forwardProtocolRegistration | bool | true | |
| host4.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host4.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host4.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host4.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host4.bl.forwardServiceRegistration | bool | true | |
| host4.bl.forwardProtocolRegistration | bool | true | |
| host4.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host4.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host4.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host4.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host4.li.forwardServiceRegistration | bool | true | |
| host4.li.forwardProtocolRegistration | bool | true | |
| host4.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host4.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host4.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host4.eth.bitrate | double | ||
| host4.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host4.nl.forwardServiceRegistration | bool | true | |
| host4.nl.forwardProtocolRegistration | bool | true | |
| host4.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host4.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host4.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host4.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host4.tn.forwardServiceRegistration | bool | true | |
| host4.tn.forwardProtocolRegistration | bool | true | |
| host4.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host4.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host4.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host4.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host4.at.forwardServiceRegistration | bool | true | |
| host4.at.forwardProtocolRegistration | bool | true | |
| host4.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host4.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host4.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host4.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host4.gpsr.interfaceTableModule | string |
context parameters |
|
| host4.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host4.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host4.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host4.gpsr.interfaces | string | "*" | |
| host4.gpsr.beaconInterval | double | 10s | |
| host4.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host4.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host4.gpsr.positionByteLength | int | 2 * 4B | |
| host4.gpsr.displayBubbles | bool | false |
visualization parameters |
| host5.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host5.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host5.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host5.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host5.environment.setupCommand | string | "" |
A host OS system command |
| host5.environment.teardownCommand | string | "" |
A host OS system command |
| host5.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host5.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host5.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host5.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host5.pcapRecorder.fileFormat | string | "pcapng" | |
| host5.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host5.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host5.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host5.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host5.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host5.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host5.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host5.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host5.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host5.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host5.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host5.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host5.cb.forwardServiceRegistration | bool | true | |
| host5.cb.forwardProtocolRegistration | bool | true | |
| host5.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host5.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host5.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host5.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host5.bl.forwardServiceRegistration | bool | true | |
| host5.bl.forwardProtocolRegistration | bool | true | |
| host5.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host5.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host5.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host5.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host5.li.forwardServiceRegistration | bool | true | |
| host5.li.forwardProtocolRegistration | bool | true | |
| host5.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host5.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host5.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host5.eth.bitrate | double | ||
| host5.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host5.nl.forwardServiceRegistration | bool | true | |
| host5.nl.forwardProtocolRegistration | bool | true | |
| host5.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host5.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host5.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host5.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host5.tn.forwardServiceRegistration | bool | true | |
| host5.tn.forwardProtocolRegistration | bool | true | |
| host5.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host5.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host5.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host5.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host5.at.forwardServiceRegistration | bool | true | |
| host5.at.forwardProtocolRegistration | bool | true | |
| host5.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host5.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host5.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host5.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host5.gpsr.interfaceTableModule | string |
context parameters |
|
| host5.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host5.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host5.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host5.gpsr.interfaces | string | "*" | |
| host5.gpsr.beaconInterval | double | 10s | |
| host5.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host5.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host5.gpsr.positionByteLength | int | 2 * 4B | |
| host5.gpsr.displayBubbles | bool | false |
visualization parameters |
| host6.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host6.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host6.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host6.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host6.environment.setupCommand | string | "" |
A host OS system command |
| host6.environment.teardownCommand | string | "" |
A host OS system command |
| host6.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host6.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host6.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host6.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host6.pcapRecorder.fileFormat | string | "pcapng" | |
| host6.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host6.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host6.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host6.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host6.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host6.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host6.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host6.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host6.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host6.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host6.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host6.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host6.cb.forwardServiceRegistration | bool | true | |
| host6.cb.forwardProtocolRegistration | bool | true | |
| host6.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host6.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host6.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host6.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host6.bl.forwardServiceRegistration | bool | true | |
| host6.bl.forwardProtocolRegistration | bool | true | |
| host6.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host6.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host6.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host6.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host6.li.forwardServiceRegistration | bool | true | |
| host6.li.forwardProtocolRegistration | bool | true | |
| host6.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host6.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host6.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host6.eth.bitrate | double | ||
| host6.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host6.nl.forwardServiceRegistration | bool | true | |
| host6.nl.forwardProtocolRegistration | bool | true | |
| host6.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host6.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host6.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host6.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host6.tn.forwardServiceRegistration | bool | true | |
| host6.tn.forwardProtocolRegistration | bool | true | |
| host6.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host6.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host6.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host6.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host6.at.forwardServiceRegistration | bool | true | |
| host6.at.forwardProtocolRegistration | bool | true | |
| host6.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host6.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host6.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host6.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host6.gpsr.interfaceTableModule | string |
context parameters |
|
| host6.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host6.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host6.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host6.gpsr.interfaces | string | "*" | |
| host6.gpsr.beaconInterval | double | 10s | |
| host6.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host6.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host6.gpsr.positionByteLength | int | 2 * 4B | |
| host6.gpsr.displayBubbles | bool | false |
visualization parameters |
| host7.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host7.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host7.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host7.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host7.environment.setupCommand | string | "" |
A host OS system command |
| host7.environment.teardownCommand | string | "" |
A host OS system command |
| host7.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host7.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host7.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host7.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host7.pcapRecorder.fileFormat | string | "pcapng" | |
| host7.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host7.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host7.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host7.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host7.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host7.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host7.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host7.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host7.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host7.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host7.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host7.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host7.cb.forwardServiceRegistration | bool | true | |
| host7.cb.forwardProtocolRegistration | bool | true | |
| host7.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host7.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host7.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host7.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host7.bl.forwardServiceRegistration | bool | true | |
| host7.bl.forwardProtocolRegistration | bool | true | |
| host7.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host7.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host7.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host7.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host7.li.forwardServiceRegistration | bool | true | |
| host7.li.forwardProtocolRegistration | bool | true | |
| host7.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host7.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host7.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host7.eth.bitrate | double | ||
| host7.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host7.nl.forwardServiceRegistration | bool | true | |
| host7.nl.forwardProtocolRegistration | bool | true | |
| host7.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host7.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host7.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host7.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host7.tn.forwardServiceRegistration | bool | true | |
| host7.tn.forwardProtocolRegistration | bool | true | |
| host7.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host7.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host7.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host7.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host7.at.forwardServiceRegistration | bool | true | |
| host7.at.forwardProtocolRegistration | bool | true | |
| host7.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host7.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host7.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host7.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host7.gpsr.interfaceTableModule | string |
context parameters |
|
| host7.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host7.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host7.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host7.gpsr.interfaces | string | "*" | |
| host7.gpsr.beaconInterval | double | 10s | |
| host7.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host7.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host7.gpsr.positionByteLength | int | 2 * 4B | |
| host7.gpsr.displayBubbles | bool | false |
visualization parameters |
| host8.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host8.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host8.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host8.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host8.environment.setupCommand | string | "" |
A host OS system command |
| host8.environment.teardownCommand | string | "" |
A host OS system command |
| host8.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host8.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host8.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host8.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host8.pcapRecorder.fileFormat | string | "pcapng" | |
| host8.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host8.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host8.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host8.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host8.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host8.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host8.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host8.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host8.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host8.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host8.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host8.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host8.cb.forwardServiceRegistration | bool | true | |
| host8.cb.forwardProtocolRegistration | bool | true | |
| host8.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host8.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host8.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host8.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host8.bl.forwardServiceRegistration | bool | true | |
| host8.bl.forwardProtocolRegistration | bool | true | |
| host8.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host8.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host8.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host8.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host8.li.forwardServiceRegistration | bool | true | |
| host8.li.forwardProtocolRegistration | bool | true | |
| host8.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host8.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host8.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host8.eth.bitrate | double | ||
| host8.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host8.nl.forwardServiceRegistration | bool | true | |
| host8.nl.forwardProtocolRegistration | bool | true | |
| host8.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host8.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host8.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host8.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host8.tn.forwardServiceRegistration | bool | true | |
| host8.tn.forwardProtocolRegistration | bool | true | |
| host8.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host8.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host8.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host8.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host8.at.forwardServiceRegistration | bool | true | |
| host8.at.forwardProtocolRegistration | bool | true | |
| host8.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host8.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host8.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host8.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host8.gpsr.interfaceTableModule | string |
context parameters |
|
| host8.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host8.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host8.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host8.gpsr.interfaces | string | "*" | |
| host8.gpsr.beaconInterval | double | 10s | |
| host8.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host8.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host8.gpsr.positionByteLength | int | 2 * 4B | |
| host8.gpsr.displayBubbles | bool | false |
visualization parameters |
| host9.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host9.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host9.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host9.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host9.environment.setupCommand | string | "" |
A host OS system command |
| host9.environment.teardownCommand | string | "" |
A host OS system command |
| host9.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host9.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host9.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host9.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host9.pcapRecorder.fileFormat | string | "pcapng" | |
| host9.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host9.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host9.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host9.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host9.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host9.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host9.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host9.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host9.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host9.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host9.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host9.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host9.cb.forwardServiceRegistration | bool | true | |
| host9.cb.forwardProtocolRegistration | bool | true | |
| host9.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host9.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host9.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host9.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host9.bl.forwardServiceRegistration | bool | true | |
| host9.bl.forwardProtocolRegistration | bool | true | |
| host9.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host9.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host9.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host9.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host9.li.forwardServiceRegistration | bool | true | |
| host9.li.forwardProtocolRegistration | bool | true | |
| host9.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host9.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host9.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host9.eth.bitrate | double | ||
| host9.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host9.nl.forwardServiceRegistration | bool | true | |
| host9.nl.forwardProtocolRegistration | bool | true | |
| host9.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host9.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host9.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host9.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host9.tn.forwardServiceRegistration | bool | true | |
| host9.tn.forwardProtocolRegistration | bool | true | |
| host9.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host9.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host9.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host9.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host9.at.forwardServiceRegistration | bool | true | |
| host9.at.forwardProtocolRegistration | bool | true | |
| host9.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host9.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host9.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host9.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host9.gpsr.interfaceTableModule | string |
context parameters |
|
| host9.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host9.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host9.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host9.gpsr.interfaces | string | "*" | |
| host9.gpsr.beaconInterval | double | 10s | |
| host9.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host9.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host9.gpsr.positionByteLength | int | 2 * 4B | |
| host9.gpsr.displayBubbles | bool | false |
visualization parameters |
| host10.status.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
| host10.environment.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.environment.initStage | int | 0 |
Initialization stage for the setup command |
| host10.environment.globalNamespace | bool | false |
Create new network namespaces under /var/run/netns/ (Linux only) |
| host10.environment.namespace | string | "" |
Name of the host OS network namespace (optional) (Linux only) |
| host10.environment.setupCommand | string | "" |
A host OS system command |
| host10.environment.teardownCommand | string | "" |
A host OS system command |
| host10.pcapRecorder.displayStringTextFormat | string | "rec: %n pks" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.pcapRecorder.verbose | bool | true |
Whether to log packets on the module output |
| host10.pcapRecorder.recordEmptyPackets | bool | true |
Specifies if zero length packets are recorded or not |
| host10.pcapRecorder.enableConvertingPackets | bool | true |
Specifies if converting packets to link type is allowed or not |
| host10.pcapRecorder.pcapFile | string | "" |
The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap" |
| host10.pcapRecorder.fileFormat | string | "pcapng" | |
| host10.pcapRecorder.snaplen | int | 65535 |
Maximum number of bytes to record per packet |
| host10.pcapRecorder.timePrecision | int | 6 |
Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format). |
| host10.pcapRecorder.dumpBadFrames | bool | true |
Enable dump of frames with hasBitError |
| host10.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*]" |
Space-separated list of sibling module names to listen on |
| host10.pcapRecorder.sendingSignalNames | string | "transmissionEnded" |
Space-separated list of outbound packet signals to subscribe to |
| host10.pcapRecorder.receivingSignalNames | string | "receptionEnded" |
Space-separated list of inbound packet signals to subscribe to |
| host10.pcapRecorder.dumpProtocols | string | "ethernetmac ppp ieee80211mac" |
Space-separated list of protocol names as defined in the Protocol class |
| host10.pcapRecorder.packetFilter | object | "*" |
Which packets are considered, matches all packets by default |
| host10.pcapRecorder.helpers | string | "" |
Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper" |
| host10.pcapRecorder.alwaysFlush | bool | false |
Flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
| host10.interfaceTable.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.interfaceTable.displayAddresses | bool | false |
Whether to display IP addresses on links |
| host10.cb.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.cb.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host10.cb.forwardServiceRegistration | bool | true | |
| host10.cb.forwardProtocolRegistration | bool | true | |
| host10.cb.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host10.cb.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host10.cb.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host10.bl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.bl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host10.bl.forwardServiceRegistration | bool | true | |
| host10.bl.forwardProtocolRegistration | bool | true | |
| host10.bl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host10.bl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host10.bl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host10.li.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.li.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host10.li.forwardServiceRegistration | bool | true | |
| host10.li.forwardProtocolRegistration | bool | true | |
| host10.li.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host10.li.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host10.li.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host10.eth.bitrate | double | ||
| host10.nl.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.nl.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host10.nl.forwardServiceRegistration | bool | true | |
| host10.nl.forwardProtocolRegistration | bool | true | |
| host10.nl.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host10.nl.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host10.nl.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host10.tn.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.tn.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host10.tn.forwardServiceRegistration | bool | true | |
| host10.tn.forwardProtocolRegistration | bool | true | |
| host10.tn.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host10.tn.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host10.tn.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host10.at.displayStringTextFormat | string | "processed %p pk (%l)" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.at.interfaceTableModule | string |
Module path to the ~InterfaceTable module |
|
| host10.at.forwardServiceRegistration | bool | true | |
| host10.at.forwardProtocolRegistration | bool | true | |
| host10.at.interfaceMapping | object | {} |
Maps network interface names to connected submodule names (e.g. {"eth0": "bridging"}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default |
| host10.at.serviceMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ethernetmac": "bridging"}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default |
| host10.at.protocolMapping | object | {} |
Maps protocols to connected submodule names (e.g. {"ipv4": "bridging"}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default |
| host10.gpsr.displayStringTextFormat | string | "" |
Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information |
| host10.gpsr.interfaceTableModule | string |
context parameters |
|
| host10.gpsr.routingTableModule | string | "^.ipv4.routingTable" | |
| host10.gpsr.networkProtocolModule | string | "^.ipv4.ip" | |
| host10.gpsr.planarizationMode | string | "GG" |
GPSR parameters |
| host10.gpsr.interfaces | string | "*" | |
| host10.gpsr.beaconInterval | double | 10s | |
| host10.gpsr.maxJitter | double | 0.5 * beaconInterval | |
| host10.gpsr.neighborValidityInterval | double | 4.5 * beaconInterval | |
| host10.gpsr.positionByteLength | int | 2 * 4B | |
| host10.gpsr.displayBubbles | bool | false |
visualization parameters |
Source code
network GPSRNetworkManual { submodules: radioMedium: Ieee80211ScalarRadioMedium { parameters: @display("p=100,200;is=s"); } configurator: Ipv4NetworkConfigurator { parameters: config = xml("<config><interface hosts='*' address='145.236.x.x' netmask='255.255.0.0'/></config>"); @display("p=100,100;is=s"); } routingTableRecorder: RoutingTableRecorder { parameters: @display("p=100,300;is=s"); } host0: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=37,300"); } host1: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=723,300"); } host2: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=185,300"); } host3: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=345,300"); } host4: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=345,157"); } host5: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=346,26"); } host6: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=446,26"); } host7: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=346,446"); } host8: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=345,572"); } host9: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=446,572"); } host10: GpsrRouter { parameters: @display("i=device/pocketpc_s;r=,,#707070;p=642,100"); } }File: examples/manetrouting/gpsr/GPSRNetwork.ned