IPv4 host with SCTP, TCP, UDP layers and applications. IP forwarding is disabled by default (see forwarding).

• Can be connected via ethernet interface to other nodes using the ethg gate. By default full-duplex connections are supported only (twisted pair). Set **.eth[*].typename="EthernetInterface" for a full/half-duplex CSMA/CD implementation (coaxial cable)
• By default contains no wireless cards, however it can be configured by the numWlanInterfaces parameter. Wireless card type is configured by the **.wlan[*].typename parameter. see: inet.linklayer.ieee80211 or other modules implementing IWirelessInterface
• Also external interfaces can be configured for HW in the loop simulation using the numEthInterfaces parameter and setting the interface type using **.eth[*].typename in the INI file. see: ExtInterface derived modules and IExternalInterface
• If wireless card is present, node mobility can be set using *.*.mobility.typename see: inet.mobility and IMobility

Inheritance diagram

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Known subclasses

Name	Type	Description
GptpEndstation	compound module	This module implements a gPTP end station that contains a clock module and a gPTP protocol.
RtpHost	compound module	(no description)
SctpNatRouter	compound module	SCTP NAT router
StandardHost6	compound module	IPv6 host with TCP, SCTP and UDP layers and applications. see StandardHost for configuration.
TsnDevice	compound module	This module represents a Time-Sensitive Networking (TSN) hardware end device that supports time synchronization, per-stream filtering and policing, scheduling and traffic shaping, frame replication and elimination, frame preemption for Ethernet networks. All TSN features are optional and they can be combined with other Ethernet features.
WirelessHost	compound module	Models a host with (default) one wireless (802.11) card in infrastructure mode. This module is basically a StandardHost with an Ieee80211Interface with mgmt.typename = Ieee80211MgmtSta added. It should be used in conjunction with AccessPoint, or any other AP model which contains Ieee80211Interface with mgmt.typename = Ieee80211MgmtAp.

Extends

Name	Type	Description
ApplicationLayerNodeBase	compound module	(no description)

Parameters

Name	Type	Default value	Description
hasStatus	bool	false
osgModel	string	""	3D model for OSG visualization, no 3D model by default
osgModelColor	string	""	tint color, no colorization by default
canvasImage	string	""	image for canvas visualization, no image by default
canvasImageColor	string	""	tint color, no colorization by default
recordPcap	bool	false
numPcapRecorders	int	recordPcap ? 1 : 0
numLoInterfaces	int	1
numWlanInterfaces	int	0
numEthInterfaces	int	0	minimum number of ethernet interfaces
numPppInterfaces	int	0	minimum number of PPP interfaces
numTunInterfaces	int	0
numVirtInterfaces	int	0
fcsMode	string	"declared"
hasIpv4	bool	true
hasIpv6	bool	false
hasGn	bool	false
forwarding	bool	false
multicastForwarding	bool	false
hasUdp	bool	firstAvailableOrEmpty("Udp") != ""
hasTcp	bool	firstAvailableOrEmpty("Tcp", "TcpLwip", "TcpNsc") != ""
hasSctp	bool	false
numApps	int	0

Properties

Name	Value	Description
networkNode
labels	node
class	NodeBase
display	i=device/pc2

Gates

Name	Direction	Size	Description
radioIn [ ]	input	numWlanInterfaces
pppg [ ]	inout	numPppInterfaces
ethg [ ]	inout	numEthInterfaces

Unassigned submodule parameters

Name	Type	Default value	Description
status.initialStatus	string	"UP"	TODO @signal, @statistic
pcapRecorder.verbose	bool	true	whether to log packets on the module output
pcapRecorder.pcapFile	string	""	the PCAP file to be written
pcapRecorder.fileFormat	string	"pcapng"
pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
pcapRecorder.moduleNamePatterns	string	"wlan[*] eth[*] ppp[*]"	space-separated list of sibling module names to listen on
pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
pcapRecorder.dumpProtocols	string	"ethernetmac ppp ieee80211mac"	space-separated list of protocol names as defined in the Protocol class
pcapRecorder.packetFilter	object	"*"	which packets are considered, matches all packets by default
pcapRecorder.helpers	string	""	usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pcapRecorder.displayStringTextFormat	string	"rec: %n pks"
interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
cb.displayStringTextFormat	string	"processed %p pk (%l)"	determines the text that is written on top of the submodule
cb.forwardServiceRegistration	bool	true
cb.forwardProtocolRegistration	bool	true
bl.displayStringTextFormat	string	"processed %p pk (%l)"	determines the text that is written on top of the submodule
bl.forwardServiceRegistration	bool	true
bl.forwardProtocolRegistration	bool	true
li.displayStringTextFormat	string	"processed %p pk (%l)"	determines the text that is written on top of the submodule
li.forwardServiceRegistration	bool	true
li.forwardProtocolRegistration	bool	true
eth.bitrate	double
nl.displayStringTextFormat	string	"processed %p pk (%l)"	determines the text that is written on top of the submodule
nl.forwardServiceRegistration	bool	true
nl.forwardProtocolRegistration	bool	true
tn.displayStringTextFormat	string	"processed %p pk (%l)"	determines the text that is written on top of the submodule
tn.forwardServiceRegistration	bool	true
tn.forwardProtocolRegistration	bool	true
at.displayStringTextFormat	string	"processed %p pk (%l)"	determines the text that is written on top of the submodule
at.forwardServiceRegistration	bool	true
at.forwardProtocolRegistration	bool	true

Source code

//
// IPv4 host with SCTP, TCP, UDP layers and applications.
// IP forwarding is disabled by default (see forwarding).
// - Can be connected via ethernet interface to other nodes using
//   the ethg gate. By default full-duplex connections are supported
//   only (twisted pair). Set **.eth[*].typename="EthernetInterface" for
//   a full/half-duplex CSMA/CD implementation (coaxial cable)
// - By default contains no wireless cards, however it can be configured
//   by the numWlanInterfaces parameter. Wireless card type is configured by the
//   **.wlan[*].typename parameter. see:  inet.linklayer.ieee80211 or other
//   modules implementing ~IWirelessInterface
// - Also external interfaces can be configured for HW in the loop simulation
//   using the numEthInterfaces parameter and setting the interface type using
//   **.eth[*].typename in the INI file. see: ~ExtInterface derived modules and ~IExternalInterface
// - If wireless card is present, node mobility can be set using *.*.mobility.typename
//   see: inet.mobility and ~IMobility
//
module StandardHost extends ApplicationLayerNodeBase
{
    parameters:
        @display("i=device/pc2");
        @figure[submodules];
        forwarding = default(false);  // disable routing by default
        ipv4.arp.proxyArpInterfaces = default(""); // proxy arp is disabled on hosts by default
        *.routingTableModule = default("^.ipv4.routingTable");
}

File: src/inet/node/inet/StandardHost.ned

---

This documentation is released under the Creative Commons license