Network VisualizationD

Package: inet.tutorials.visualization
File: tutorials/visualization/VisualizationNetworks.ned

(no description)

IntegratedVisualizer OsgGeographicCoordinateSystem WirelessHost WirelessHost AccessPoint IPv4NetworkConfigurator Ieee80211ScalarRadioMedium

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Extends:

Name Type Description
VisualizationC network (no description)

Known subclasses:

Name Type Description
VisualizationE network (no description)

Properties:

Name Value Description
isNetwork
display bgb=0,0

Unassigned submodule parameters:

Name Type Default value Description
coordinateSystem.playgroundLatitude double

latitude coordinate of the playground origin

coordinateSystem.playgroundLongitude double

longitude coordinate of the playground origin

coordinateSystem.playgroundAltitude double 0m

altitude coordinate of the playground origin

coordinateSystem.playgroundHeading double 0deg

heading of the playground

coordinateSystem.playgroundElevation double 0deg

elevation of the playground

coordinateSystem.playgroundBank double 0deg

bank of the playground

pedestrian0.status.initialStatus string "UP"

TODO @signal, @statistic

pedestrian0.routingTable.forwarding bool
pedestrian0.routingTable.multicastForwarding bool
pedestrian0.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

pedestrian0.pcapRecorder.verbose bool false

whether to log packets on the module output

pedestrian0.pcapRecorder.pcapFile string ""

the PCAP file to be written

pedestrian0.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

pedestrian0.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

pedestrian0.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

pedestrian0.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

pedestrian0.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

pedestrian0.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

pedestrian0.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

pedestrian0.lo0.lo.mtu int 4470B
pedestrian1.status.initialStatus string "UP"

TODO @signal, @statistic

pedestrian1.routingTable.forwarding bool
pedestrian1.routingTable.multicastForwarding bool
pedestrian1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

pedestrian1.pcapRecorder.verbose bool false

whether to log packets on the module output

pedestrian1.pcapRecorder.pcapFile string ""

the PCAP file to be written

pedestrian1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet

pedestrian1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError

pedestrian1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*] ext[*]"

space-separated list of sibling module names to listen on

pedestrian1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to

pedestrian1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to

pedestrian1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash

pedestrian1.lo0.lo.interfaceTableModule string

The path to the InterfaceTable module

pedestrian1.lo0.lo.mtu int 4470B
accessPoint0.status.initialStatus string "UP"

TODO @signal, @statistic

accessPoint0.interfaceTable.displayAddresses bool false

whether to display IP addresses on links

accessPoint0.macTable.agingTime double
accessPoint0.macTable.addressTableFile string
configurator.minLinkWeight double 1E-3
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes

configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network

configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces

configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)

configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)

configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)

configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)

configurator.dumpTopology bool false

print extracted network topology to the module output

configurator.dumpLinks bool false

print recognized network links to the module output

configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output

configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output

configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)

radioMedium.neighborCache.refillPeriod double

Source code:

network VisualizationD extends VisualizationC
{
    parameters:
        @display("bgb=0,0");
    submodules:
        pedestrian0: WirelessHost {
            parameters:
                @display("p=398,89;i=device/cellphone");
        }
        pedestrian1: WirelessHost {
            parameters:
                @display("p=548,89;i=device/cellphone");
        }
        accessPoint0: AccessPoint {
            parameters:
                @display("p=487,163");
        }
        configurator: IPv4NetworkConfigurator {
            parameters:
                @display("p=100,250");
        }
        radioMedium: Ieee80211ScalarRadioMedium {
            parameters:
                @display("p=100,350");
        }
}
//#### doxygen marker