IPv6 compatible node with MIPv6 support. Models a host with one wireless (802.11b) card in infrastructure mode, supports handovers and MIPv6 protocol. This module is basically a StandardHost with an Ieee80211NicSTA and MobileIPLayer6 added. It should be used in conjunction with WirelessAPSimplified, or any other AP model which contains Ieee80211NicAPSimplified.
See also: AccessPoint
See also: WirelessHost
See also: AdhocHost
The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.
The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.
Name | Type | Description |
---|---|---|
StandardHost6 | compound module |
IPv6 host with TCP, SCTP and UDP layers and applications. see StandardHost for configuration. |
Name | Type | Description |
---|---|---|
mIPv6Network | network | (no description) |
Name | Type | Default value | Description |
---|---|---|---|
hasStatus | bool | false | |
numExtInterfaces | int | 0 | |
numRadios | int | 1 |
the number of radios in the router. by default no wireless |
numPcapRecorders | int | 0 |
no of PcapRecorders. |
numTunInterfaces | int | 0 | |
osgModel | string | "" |
3D model for OSG visualization, no 3D model by default |
osgModelColor | string | "" |
tint color, no colorization by default |
mobilityType | string | numRadios > 0 ? "StationaryMobility" : "" | |
networkLayerType | string | "IPv6NetworkLayer" | |
routingTableType | string | "IPv6RoutingTable" | |
forwarding | bool | false | |
multicastForwarding | bool | false | |
energyStorageType | string | "" | |
energyManagementType | string | "" | |
energyGeneratorType | string | "" | |
numTcpApps | int | 0 |
no of TCP apps. Specify the app types in INI file with tcpApp[0..1].typename="TCPEchoApp" syntax |
numUdpApps | int | 0 |
no of UDP apps. Specify the app types in INI file with udpApp[0..1].typename="UDPVideoStreamCli" syntax |
numSctpApps | int | 0 |
no of SCTP apps. Specify the app types in INI file with sctpApp[0..1].typename="SCTPServer" syntax |
numPingApps | int | 0 |
no of PING apps. Specify the app types in INI file with pingApp[0..1].typename="PingApp" syntax |
hasTcp | bool | numTcpApps > 0 | |
hasUdp | bool | numUdpApps > 0 | |
hasSctp | bool | numSctpApps > 0 | |
hasTun | bool | numTunInterfaces > 0 | |
tcpType | string | firstAvailableOrEmpty("TCP", "TCP_lwIP", "TCP_NSC") |
tcp implementation (e.g. TCP, TCP_lwIP, TCP_NSC) or TCPSpoof |
udpType | string | firstAvailableOrEmpty("UDP") | |
sctpType | string | firstAvailableOrEmpty("SCTP") | |
routes | xml | xml(" |
Name | Value | Description |
---|---|---|
display | i=device/wifilaptop | |
networkNode | ||
labels | node |
Name | Direction | Size | Description |
---|---|---|---|
radioIn [ ] | input | numRadios | |
pppg [ ] | inout | ||
ethg [ ] | inout |
Name | Type | Default value | Description |
---|---|---|---|
status.initialStatus | string | "UP" |
TODO @signal, @statistic |
routingTable.forwarding | bool | ||
routingTable.multicastForwarding | bool | ||
interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
pcapRecorder.verbose | bool | false |
whether to log packets on the module output |
pcapRecorder.pcapFile | string | "" |
the PCAP file to be written |
pcapRecorder.snaplen | int | 65535 |
maximum number of bytes to record per packet |
pcapRecorder.dumpBadFrames | bool | true |
enable dump of frames with hasBitError |
pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*] ext[*]" |
space-separated list of sibling module names to listen on |
pcapRecorder.sendingSignalNames | string | "packetSentToLower" |
space-separated list of outbound packet signals to subscribe to |
pcapRecorder.receivingSignalNames | string | "packetReceivedFromLower" |
space-separated list of inbound packet signals to subscribe to |
pcapRecorder.alwaysFlush | bool | false |
flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
lo0.lo.mtu | int | 4470B |
// // IPv6 compatible node with MIPv6 support. // Models a host with one wireless (802.11b) card in infrastructure mode, supports handovers and MIPv6 protocol. // This module is basically a StandardHost with an Ieee80211NicSTA and MobileIPLayer6 // added. It should be used in conjunction with WirelessAPSimplified, // or any other AP model which contains Ieee80211NicAPSimplified. // // @see AccessPoint // @see WirelessHost // @see AdhocHost // module WirelessHost6 extends StandardHost6 { numRadios = 1; networkLayer.xMIPv6Support = true; networkLayer.mipv6support.isMobileNode = true; //is Mobile Node networkLayer.mipv6support.isHomeAgent = false; //is Home Agent @display("i=device/wifilaptop"); }