(no description)
The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.
The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.
Name | Type | Description |
---|---|---|
AdhocHost | compound module |
A wireless host containing routing, mobility and battery components. Supports only IPv4 protocol, TCP and UDP as transport protocol. This is a typical mobile node which can participate in adhoc routing and may have TCP/UDP applications installed. Supports ICMP (ping) too. |
Name | Type | Description |
---|---|---|
DynamicRadioNetwork | network | (no description) |
Name | Type | Default value | Description |
---|---|---|---|
hasStatus | bool | false | |
numExtInterfaces | int | 0 | |
numRadios | int | 1 |
the number of radios in the router. by default no wireless |
numPcapRecorders | int | 0 |
no of PcapRecorders. |
numTunInterfaces | int | 0 | |
osgModel | string | "" |
3D model for OSG visualization, no 3D model by default |
osgModelColor | string | "" |
tint color, no colorization by default |
mobilityType | string | numRadios > 0 ? "StationaryMobility" : "" | |
networkLayerType | string | "IPv4NetworkLayer" | |
routingTableType | string | "IPv4RoutingTable" | |
forwarding | bool | true | |
multicastForwarding | bool | false | |
energyStorageType | string | "" | |
energyManagementType | string | "" | |
energyGeneratorType | string | "" | |
numTcpApps | int | 0 |
no of TCP apps. Specify the app types in INI file with tcpApp[0..1].typename="TCPEchoApp" syntax |
numUdpApps | int | 0 |
no of UDP apps. Specify the app types in INI file with udpApp[0..1].typename="UDPVideoStreamCli" syntax |
numSctpApps | int | 0 |
no of SCTP apps. Specify the app types in INI file with sctpApp[0..1].typename="SCTPServer" syntax |
numPingApps | int | 0 |
no of PING apps. Specify the app types in INI file with pingApp[0..1].typename="PingApp" syntax |
hasTcp | bool | numTcpApps > 0 | |
hasUdp | bool | numUdpApps > 0 | |
hasSctp | bool | numSctpApps > 0 | |
hasTun | bool | numTunInterfaces > 0 | |
tcpType | string | firstAvailableOrEmpty("TCP", "TCP_lwIP", "TCP_NSC") |
tcp implementation (e.g. TCP, TCP_lwIP, TCP_NSC) or TCPSpoof |
udpType | string | firstAvailableOrEmpty("UDP") | |
sctpType | string | firstAvailableOrEmpty("SCTP") |
Name | Value | Description |
---|---|---|
display | i=device/cellphone | |
networkNode | ||
labels | node |
Name | Direction | Size | Description |
---|---|---|---|
radioIn [ ] | input | numRadios | |
pppg [ ] | inout | ||
ethg [ ] | inout |
Name | Type | Default value | Description |
---|---|---|---|
status.initialStatus | string | "UP" |
TODO @signal, @statistic |
routingTable.forwarding | bool | ||
routingTable.multicastForwarding | bool | ||
interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
pcapRecorder.verbose | bool | false |
whether to log packets on the module output |
pcapRecorder.pcapFile | string | "" |
the PCAP file to be written |
pcapRecorder.snaplen | int | 65535 |
maximum number of bytes to record per packet |
pcapRecorder.dumpBadFrames | bool | true |
enable dump of frames with hasBitError |
pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*] ext[*]" |
space-separated list of sibling module names to listen on |
pcapRecorder.sendingSignalNames | string | "packetSentToLower" |
space-separated list of outbound packet signals to subscribe to |
pcapRecorder.receivingSignalNames | string | "packetReceivedFromLower" |
space-separated list of inbound packet signals to subscribe to |
pcapRecorder.alwaysFlush | bool | false |
flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
lo0.lo.mtu | int | 4470B | |
autoConfigurator.interfaces | string | "wlan" |
list of interfaces to autoassign addresses to, separated by a single space characters |
autoConfigurator.addressBase | string | "10.0.0.0" |
start of address range from which to automatically assign an address to the autoassignInterfaces |
autoConfigurator.netmask | string | "255.0.0.0" |
netmask of subnet in which to automatically assign an address to the autoassignInterfaces |
autoConfigurator.mcastGroups | string | "" |
list of IP addresses of multicast groups to join, separated by a single space characters |
module DynamicHost extends AdhocHost { parameters: networkLayer.configurator.networkConfiguratorModule = ""; submodules: autoConfigurator: HostAutoConfigurator { @display("p=171,335"); } }