Network RSVPTE4

Package: inet.examples.mpls.testte_routing
File: examples/mpls/testte_routing/RSVPTE4.ned

Example network to demonstrate RSVP-TE.

See the README file in the model directory for scenario description.

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Properties:

Name	Value	Description
isNetwork

Unassigned submodule parameters:

Name	Type	Default value	Description
LSR1.status.initialStatus	string	"UP"	TODO @signal, @statistic
LSR1.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.routingTable.netmaskRoutes	string	"*"	maintain netmask routes for interfaces
LSR1.routingTable.multicastForwarding	bool	false	turns multicast forwarding on/off
LSR1.routingTable.useAdminDist	bool	false	Use Cisco like administrative distances
LSR1.routingTable.routingFile	string	""	routing table file name
LSR1.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
LSR1.ted.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.ted.routingTableModule	string
LSR1.linkStateRouting.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.linkStateRouting.routingTableModule	string
LSR1.linkStateRouting.tedModule	string
LSR1.rsvp.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.rsvp.routingTableModule	string
LSR1.rsvp.libTableModule	string
LSR1.rsvp.tedModule	string
LSR1.rsvp.traffic	xml	xml("")	specifies paths to set up
LSR1.rsvp.helloInterval	double
LSR1.rsvp.helloTimeout	double
LSR1.classifier.routingTableModule	string
LSR1.classifier.libTableModule	string
LSR1.classifier.rsvpModule	string
LSR1.classifier.config	xml	xml("")
LSR1.networkLayer.configurator.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.networkLayer.configurator.networkConfiguratorModule	string	"configurator"	TODO: eventually rename to networkConfigurator
LSR1.networkLayer.configurator.configureRoutingTable	bool	true	add routing entries to routing table (uses the configurator module)
LSR1.networkLayer.ip.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.networkLayer.ip.routingTableModule	string
LSR1.networkLayer.ip.arpModule	string
LSR1.networkLayer.ip.icmpModule	string
LSR1.networkLayer.ip.procDelay	double	0s
LSR1.networkLayer.ip.timeToLive	int	32
LSR1.networkLayer.ip.multicastTimeToLive	int	32
LSR1.networkLayer.ip.fragmentTimeout	double	60s
LSR1.networkLayer.ip.forceBroadcast	bool	false
LSR1.networkLayer.icmp.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.networkLayer.icmp.routingTableModule	string
LSR1.mpls.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.mpls.libTableModule	string
LSR1.libTable.config	xml	xml("")	table contents to be loaded on startup
LSR1.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
LSR1.lo0.lo.mtu	int	4470B
LSR2.status.initialStatus	string	"UP"	TODO @signal, @statistic
LSR2.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.routingTable.netmaskRoutes	string	"*"	maintain netmask routes for interfaces
LSR2.routingTable.multicastForwarding	bool	false	turns multicast forwarding on/off
LSR2.routingTable.useAdminDist	bool	false	Use Cisco like administrative distances
LSR2.routingTable.routingFile	string	""	routing table file name
LSR2.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
LSR2.ted.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.ted.routingTableModule	string
LSR2.linkStateRouting.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.linkStateRouting.routingTableModule	string
LSR2.linkStateRouting.tedModule	string
LSR2.rsvp.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.rsvp.routingTableModule	string
LSR2.rsvp.libTableModule	string
LSR2.rsvp.tedModule	string
LSR2.rsvp.traffic	xml	xml("")	specifies paths to set up
LSR2.rsvp.helloInterval	double
LSR2.rsvp.helloTimeout	double
LSR2.classifier.routingTableModule	string
LSR2.classifier.libTableModule	string
LSR2.classifier.rsvpModule	string
LSR2.classifier.config	xml	xml("")
LSR2.networkLayer.configurator.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.networkLayer.configurator.networkConfiguratorModule	string	"configurator"	TODO: eventually rename to networkConfigurator
LSR2.networkLayer.configurator.configureRoutingTable	bool	true	add routing entries to routing table (uses the configurator module)
LSR2.networkLayer.ip.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.networkLayer.ip.routingTableModule	string
LSR2.networkLayer.ip.arpModule	string
LSR2.networkLayer.ip.icmpModule	string
LSR2.networkLayer.ip.procDelay	double	0s
LSR2.networkLayer.ip.timeToLive	int	32
LSR2.networkLayer.ip.multicastTimeToLive	int	32
LSR2.networkLayer.ip.fragmentTimeout	double	60s
LSR2.networkLayer.ip.forceBroadcast	bool	false
LSR2.networkLayer.icmp.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.networkLayer.icmp.routingTableModule	string
LSR2.mpls.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.mpls.libTableModule	string
LSR2.libTable.config	xml	xml("")	table contents to be loaded on startup
LSR2.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
LSR2.lo0.lo.mtu	int	4470B
LSR3.status.initialStatus	string	"UP"	TODO @signal, @statistic
LSR3.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.routingTable.netmaskRoutes	string	"*"	maintain netmask routes for interfaces
LSR3.routingTable.multicastForwarding	bool	false	turns multicast forwarding on/off
LSR3.routingTable.useAdminDist	bool	false	Use Cisco like administrative distances
LSR3.routingTable.routingFile	string	""	routing table file name
LSR3.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
LSR3.ted.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.ted.routingTableModule	string
LSR3.linkStateRouting.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.linkStateRouting.routingTableModule	string
LSR3.linkStateRouting.tedModule	string
LSR3.rsvp.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.rsvp.routingTableModule	string
LSR3.rsvp.libTableModule	string
LSR3.rsvp.tedModule	string
LSR3.rsvp.traffic	xml	xml("")	specifies paths to set up
LSR3.rsvp.helloInterval	double
LSR3.rsvp.helloTimeout	double
LSR3.classifier.routingTableModule	string
LSR3.classifier.libTableModule	string
LSR3.classifier.rsvpModule	string
LSR3.classifier.config	xml	xml("")
LSR3.networkLayer.configurator.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.networkLayer.configurator.networkConfiguratorModule	string	"configurator"	TODO: eventually rename to networkConfigurator
LSR3.networkLayer.configurator.configureRoutingTable	bool	true	add routing entries to routing table (uses the configurator module)
LSR3.networkLayer.ip.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.networkLayer.ip.routingTableModule	string
LSR3.networkLayer.ip.arpModule	string
LSR3.networkLayer.ip.icmpModule	string
LSR3.networkLayer.ip.procDelay	double	0s
LSR3.networkLayer.ip.timeToLive	int	32
LSR3.networkLayer.ip.multicastTimeToLive	int	32
LSR3.networkLayer.ip.fragmentTimeout	double	60s
LSR3.networkLayer.ip.forceBroadcast	bool	false
LSR3.networkLayer.icmp.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.networkLayer.icmp.routingTableModule	string
LSR3.mpls.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.mpls.libTableModule	string
LSR3.libTable.config	xml	xml("")	table contents to be loaded on startup
LSR3.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
LSR3.lo0.lo.mtu	int	4470B
LSR4.status.initialStatus	string	"UP"	TODO @signal, @statistic
LSR4.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.routingTable.netmaskRoutes	string	"*"	maintain netmask routes for interfaces
LSR4.routingTable.multicastForwarding	bool	false	turns multicast forwarding on/off
LSR4.routingTable.useAdminDist	bool	false	Use Cisco like administrative distances
LSR4.routingTable.routingFile	string	""	routing table file name
LSR4.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
LSR4.ted.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.ted.routingTableModule	string
LSR4.linkStateRouting.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.linkStateRouting.routingTableModule	string
LSR4.linkStateRouting.tedModule	string
LSR4.rsvp.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.rsvp.routingTableModule	string
LSR4.rsvp.libTableModule	string
LSR4.rsvp.tedModule	string
LSR4.rsvp.traffic	xml	xml("")	specifies paths to set up
LSR4.rsvp.helloInterval	double
LSR4.rsvp.helloTimeout	double
LSR4.classifier.routingTableModule	string
LSR4.classifier.libTableModule	string
LSR4.classifier.rsvpModule	string
LSR4.classifier.config	xml	xml("")
LSR4.networkLayer.configurator.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.networkLayer.configurator.networkConfiguratorModule	string	"configurator"	TODO: eventually rename to networkConfigurator
LSR4.networkLayer.configurator.configureRoutingTable	bool	true	add routing entries to routing table (uses the configurator module)
LSR4.networkLayer.ip.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.networkLayer.ip.routingTableModule	string
LSR4.networkLayer.ip.arpModule	string
LSR4.networkLayer.ip.icmpModule	string
LSR4.networkLayer.ip.procDelay	double	0s
LSR4.networkLayer.ip.timeToLive	int	32
LSR4.networkLayer.ip.multicastTimeToLive	int	32
LSR4.networkLayer.ip.fragmentTimeout	double	60s
LSR4.networkLayer.ip.forceBroadcast	bool	false
LSR4.networkLayer.icmp.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.networkLayer.icmp.routingTableModule	string
LSR4.mpls.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.mpls.libTableModule	string
LSR4.libTable.config	xml	xml("")	table contents to be loaded on startup
LSR4.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
LSR4.lo0.lo.mtu	int	4470B
LSR5.status.initialStatus	string	"UP"	TODO @signal, @statistic
LSR5.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.routingTable.netmaskRoutes	string	"*"	maintain netmask routes for interfaces
LSR5.routingTable.multicastForwarding	bool	false	turns multicast forwarding on/off
LSR5.routingTable.useAdminDist	bool	false	Use Cisco like administrative distances
LSR5.routingTable.routingFile	string	""	routing table file name
LSR5.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
LSR5.ted.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.ted.routingTableModule	string
LSR5.linkStateRouting.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.linkStateRouting.routingTableModule	string
LSR5.linkStateRouting.tedModule	string
LSR5.rsvp.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.rsvp.routingTableModule	string
LSR5.rsvp.libTableModule	string
LSR5.rsvp.tedModule	string
LSR5.rsvp.traffic	xml	xml("")	specifies paths to set up
LSR5.rsvp.helloInterval	double
LSR5.rsvp.helloTimeout	double
LSR5.classifier.routingTableModule	string
LSR5.classifier.libTableModule	string
LSR5.classifier.rsvpModule	string
LSR5.classifier.config	xml	xml("")
LSR5.networkLayer.configurator.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.networkLayer.configurator.networkConfiguratorModule	string	"configurator"	TODO: eventually rename to networkConfigurator
LSR5.networkLayer.configurator.configureRoutingTable	bool	true	add routing entries to routing table (uses the configurator module)
LSR5.networkLayer.ip.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.networkLayer.ip.routingTableModule	string
LSR5.networkLayer.ip.arpModule	string
LSR5.networkLayer.ip.icmpModule	string
LSR5.networkLayer.ip.procDelay	double	0s
LSR5.networkLayer.ip.timeToLive	int	32
LSR5.networkLayer.ip.multicastTimeToLive	int	32
LSR5.networkLayer.ip.fragmentTimeout	double	60s
LSR5.networkLayer.ip.forceBroadcast	bool	false
LSR5.networkLayer.icmp.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.networkLayer.icmp.routingTableModule	string
LSR5.mpls.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.mpls.libTableModule	string
LSR5.libTable.config	xml	xml("")	table contents to be loaded on startup
LSR5.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
LSR5.lo0.lo.mtu	int	4470B
LSR6.status.initialStatus	string	"UP"	TODO @signal, @statistic
LSR6.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.routingTable.netmaskRoutes	string	"*"	maintain netmask routes for interfaces
LSR6.routingTable.multicastForwarding	bool	false	turns multicast forwarding on/off
LSR6.routingTable.useAdminDist	bool	false	Use Cisco like administrative distances
LSR6.routingTable.routingFile	string	""	routing table file name
LSR6.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
LSR6.ted.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.ted.routingTableModule	string
LSR6.linkStateRouting.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.linkStateRouting.routingTableModule	string
LSR6.linkStateRouting.tedModule	string
LSR6.rsvp.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.rsvp.routingTableModule	string
LSR6.rsvp.libTableModule	string
LSR6.rsvp.tedModule	string
LSR6.rsvp.traffic	xml	xml("")	specifies paths to set up
LSR6.rsvp.helloInterval	double
LSR6.rsvp.helloTimeout	double
LSR6.classifier.routingTableModule	string
LSR6.classifier.libTableModule	string
LSR6.classifier.rsvpModule	string
LSR6.classifier.config	xml	xml("")
LSR6.networkLayer.configurator.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.networkLayer.configurator.networkConfiguratorModule	string	"configurator"	TODO: eventually rename to networkConfigurator
LSR6.networkLayer.configurator.configureRoutingTable	bool	true	add routing entries to routing table (uses the configurator module)
LSR6.networkLayer.ip.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.networkLayer.ip.routingTableModule	string
LSR6.networkLayer.ip.arpModule	string
LSR6.networkLayer.ip.icmpModule	string
LSR6.networkLayer.ip.procDelay	double	0s
LSR6.networkLayer.ip.timeToLive	int	32
LSR6.networkLayer.ip.multicastTimeToLive	int	32
LSR6.networkLayer.ip.fragmentTimeout	double	60s
LSR6.networkLayer.ip.forceBroadcast	bool	false
LSR6.networkLayer.icmp.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.networkLayer.icmp.routingTableModule	string
LSR6.mpls.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.mpls.libTableModule	string
LSR6.libTable.config	xml	xml("")	table contents to be loaded on startup
LSR6.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
LSR6.lo0.lo.mtu	int	4470B
LSR7.status.initialStatus	string	"UP"	TODO @signal, @statistic
LSR7.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.routingTable.netmaskRoutes	string	"*"	maintain netmask routes for interfaces
LSR7.routingTable.multicastForwarding	bool	false	turns multicast forwarding on/off
LSR7.routingTable.useAdminDist	bool	false	Use Cisco like administrative distances
LSR7.routingTable.routingFile	string	""	routing table file name
LSR7.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
LSR7.ted.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.ted.routingTableModule	string
LSR7.linkStateRouting.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.linkStateRouting.routingTableModule	string
LSR7.linkStateRouting.tedModule	string
LSR7.rsvp.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.rsvp.routingTableModule	string
LSR7.rsvp.libTableModule	string
LSR7.rsvp.tedModule	string
LSR7.rsvp.traffic	xml	xml("")	specifies paths to set up
LSR7.rsvp.helloInterval	double
LSR7.rsvp.helloTimeout	double
LSR7.classifier.routingTableModule	string
LSR7.classifier.libTableModule	string
LSR7.classifier.rsvpModule	string
LSR7.classifier.config	xml	xml("")
LSR7.networkLayer.configurator.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.networkLayer.configurator.networkConfiguratorModule	string	"configurator"	TODO: eventually rename to networkConfigurator
LSR7.networkLayer.configurator.configureRoutingTable	bool	true	add routing entries to routing table (uses the configurator module)
LSR7.networkLayer.ip.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.networkLayer.ip.routingTableModule	string
LSR7.networkLayer.ip.arpModule	string
LSR7.networkLayer.ip.icmpModule	string
LSR7.networkLayer.ip.procDelay	double	0s
LSR7.networkLayer.ip.timeToLive	int	32
LSR7.networkLayer.ip.multicastTimeToLive	int	32
LSR7.networkLayer.ip.fragmentTimeout	double	60s
LSR7.networkLayer.ip.forceBroadcast	bool	false
LSR7.networkLayer.icmp.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.networkLayer.icmp.routingTableModule	string
LSR7.mpls.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.mpls.libTableModule	string
LSR7.libTable.config	xml	xml("")	table contents to be loaded on startup
LSR7.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
LSR7.lo0.lo.mtu	int	4470B
host1.status.initialStatus	string	"UP"	TODO @signal, @statistic
host1.routingTable.forwarding	bool
host1.routingTable.multicastForwarding	bool
host1.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
host1.pcapRecorder.verbose	bool	false	whether to log packets on the module output
host1.pcapRecorder.pcapFile	string	""	the PCAP file to be written
host1.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
host1.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
host1.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
host1.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
host1.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
host1.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host1.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
host1.lo0.lo.mtu	int	4470B
host2.status.initialStatus	string	"UP"	TODO @signal, @statistic
host2.routingTable.forwarding	bool
host2.routingTable.multicastForwarding	bool
host2.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
host2.pcapRecorder.verbose	bool	false	whether to log packets on the module output
host2.pcapRecorder.pcapFile	string	""	the PCAP file to be written
host2.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
host2.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
host2.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
host2.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
host2.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
host2.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host2.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
host2.lo0.lo.mtu	int	4470B
host3.status.initialStatus	string	"UP"	TODO @signal, @statistic
host3.routingTable.forwarding	bool
host3.routingTable.multicastForwarding	bool
host3.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
host3.pcapRecorder.verbose	bool	false	whether to log packets on the module output
host3.pcapRecorder.pcapFile	string	""	the PCAP file to be written
host3.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
host3.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
host3.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
host3.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
host3.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
host3.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host3.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
host3.lo0.lo.mtu	int	4470B
host4.status.initialStatus	string	"UP"	TODO @signal, @statistic
host4.routingTable.forwarding	bool
host4.routingTable.multicastForwarding	bool
host4.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
host4.pcapRecorder.verbose	bool	false	whether to log packets on the module output
host4.pcapRecorder.pcapFile	string	""	the PCAP file to be written
host4.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
host4.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
host4.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
host4.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
host4.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
host4.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host4.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
host4.lo0.lo.mtu	int	4470B
host5.status.initialStatus	string	"UP"	TODO @signal, @statistic
host5.routingTable.forwarding	bool
host5.routingTable.multicastForwarding	bool
host5.interfaceTable.displayAddresses	bool	false	whether to display IP addresses on links
host5.pcapRecorder.verbose	bool	false	whether to log packets on the module output
host5.pcapRecorder.pcapFile	string	""	the PCAP file to be written
host5.pcapRecorder.snaplen	int	65535	maximum number of bytes to record per packet
host5.pcapRecorder.dumpBadFrames	bool	true	enable dump of frames with hasBitError
host5.pcapRecorder.moduleNamePatterns	string	"wlan[] eth[] ppp[] ext[]"	space-separated list of sibling module names to listen on
host5.pcapRecorder.sendingSignalNames	string	"packetSentToLower"	space-separated list of outbound packet signals to subscribe to
host5.pcapRecorder.receivingSignalNames	string	"packetReceivedFromLower"	space-separated list of inbound packet signals to subscribe to
host5.pcapRecorder.alwaysFlush	bool	false	flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host5.lo0.lo.interfaceTableModule	string		The path to the InterfaceTable module
host5.lo0.lo.mtu	int	4470B
scenarioManager.script	xml	xml("")

Source code:

//
// Example network to demonstrate RSVP-TE.
//
// See the README file in the model directory for scenario description.
//
network RSVPTE4
{
    parameters:
        **.networkLayer.configurator.networkConfiguratorModule = "";

    submodules:
        LSR1: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1";
                @display("p=160,167");
            gates:
                pppg[5];
        }
        LSR2: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1 ppp2";
                @display("p=254,255");
            gates:
                pppg[3];
        }
        LSR3: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1 ppp2";
                @display("p=253,78");
            gates:
                pppg[3];
        }
        LSR4: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1 ppp2";
                @display("p=358,167");
            gates:
                pppg[3];
        }
        LSR5: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp3 ppp4";
                @display("p=460,167");
            gates:
                pppg[5];
        }
        LSR6: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1";
                @display("p=400,300");
            gates:
                pppg[2];
        }
        LSR7: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1";
                @display("p=400,50");
            gates:
                pppg[2];
        }
        host1: StandardHost { // client
            parameters:
                @display("p=71,80;i=device/pc2");
        }
        host2: StandardHost { // client
            parameters:
                @display("p=72,153;i=device/pc2");
        }
        host3: StandardHost { // server
            parameters:
                @display("p=570,88;i=device/server");
        }
        host4: StandardHost { // server
            parameters:
                @display("p=562,256;i=device/server");
        }
        host5: StandardHost { // client
            parameters:
                @display("p=73,233;i=device/pc2");
        }
        scenarioManager: ScenarioManager {
            parameters:
                @display("p=150,50");
        }
        lifecycleController: LifecycleController {
            parameters:
                @display("p=500,50");
        }
    connections:
        LSR1.pppg[0] <--> {  delay = 15ms; datarate = 600kbps; } <--> LSR2.pppg[0];
        LSR1.pppg[1] <--> {  delay = 5ms; datarate = 600kbps; } <--> LSR3.pppg[0];
        host2.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR1.pppg[2];
        host1.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR1.pppg[3];
        LSR2.pppg[1] <--> {  delay = 5ms; datarate = 600kbps; } <--> LSR4.pppg[0];
        LSR3.pppg[1] <--> {  delay = 5ms; datarate = 600kbps; } <--> LSR4.pppg[2];
        LSR4.pppg[1] <--> {  delay = 5ms; datarate = 600kbps; } <--> LSR5.pppg[0];
        LSR5.pppg[1] <--> {  delay = 10ms; datarate = 600kbps; } <--> host3.pppg++;
        LSR5.pppg[2] <--> {  delay = 10ms; datarate = 600kbps; } <--> host4.pppg++;
        LSR2.pppg[2] <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR6.pppg[0];
        LSR5.pppg[3] <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR6.pppg[1];
        LSR3.pppg[2] <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR7.pppg[0];
        LSR5.pppg[4] <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR7.pppg[1];
        host5.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR1.pppg[4];
}