(no description)
The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.
The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.
Name | Value | Description |
---|---|---|
isNetwork |
Name | Type | Default value | Description |
---|---|---|---|
LSR1.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
LSR1.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
LSR1.routingTable.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.routingTable.netmaskRoutes | string | "*" |
maintain netmask routes for interfaces |
LSR1.routingTable.multicastForwarding | bool | false |
turns multicast forwarding on/off |
LSR1.routingTable.useAdminDist | bool | false |
Use Cisco like administrative distances |
LSR1.routingTable.routingFile | string | "" |
routing table file name |
LSR1.ldp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.ldp.routingTableModule | string | ||
LSR1.ldp.libTableModule | string | ||
LSR1.ldp.tedModule | string | ||
LSR1.ldp.dataTransferMode | string | "bytecount" |
TCP data transfer mode |
LSR1.ted.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.ted.routingTableModule | string | ||
LSR1.linkStateRouting.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.linkStateRouting.routingTableModule | string | ||
LSR1.linkStateRouting.tedModule | string | ||
LSR1.networkLayer.configurator.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.networkLayer.configurator.networkConfiguratorModule | string | "configurator" |
TODO: eventually rename to networkConfigurator |
LSR1.networkLayer.configurator.configureRoutingTable | bool | true |
add routing entries to routing table (uses the configurator module) |
LSR1.networkLayer.ip.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.networkLayer.ip.routingTableModule | string | ||
LSR1.networkLayer.ip.arpModule | string | ||
LSR1.networkLayer.ip.icmpModule | string | ||
LSR1.networkLayer.ip.procDelay | double | 0s | |
LSR1.networkLayer.ip.timeToLive | int | 32 | |
LSR1.networkLayer.ip.multicastTimeToLive | int | 32 | |
LSR1.networkLayer.ip.fragmentTimeout | double | 60s | |
LSR1.networkLayer.ip.forceBroadcast | bool | false | |
LSR1.networkLayer.icmp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.networkLayer.icmp.routingTableModule | string | ||
LSR1.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.lo0.lo.mtu | int | 4470B | |
LSR1.mpls.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR1.mpls.libTableModule | string | ||
LSR1.libTable.config | xml | xml(" |
table contents to be loaded on startup |
LSR2.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
LSR2.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
LSR2.routingTable.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.routingTable.netmaskRoutes | string | "*" |
maintain netmask routes for interfaces |
LSR2.routingTable.multicastForwarding | bool | false |
turns multicast forwarding on/off |
LSR2.routingTable.useAdminDist | bool | false |
Use Cisco like administrative distances |
LSR2.routingTable.routingFile | string | "" |
routing table file name |
LSR2.ldp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.ldp.routingTableModule | string | ||
LSR2.ldp.libTableModule | string | ||
LSR2.ldp.tedModule | string | ||
LSR2.ldp.dataTransferMode | string | "bytecount" |
TCP data transfer mode |
LSR2.ted.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.ted.routingTableModule | string | ||
LSR2.linkStateRouting.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.linkStateRouting.routingTableModule | string | ||
LSR2.linkStateRouting.tedModule | string | ||
LSR2.networkLayer.configurator.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.networkLayer.configurator.networkConfiguratorModule | string | "configurator" |
TODO: eventually rename to networkConfigurator |
LSR2.networkLayer.configurator.configureRoutingTable | bool | true |
add routing entries to routing table (uses the configurator module) |
LSR2.networkLayer.ip.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.networkLayer.ip.routingTableModule | string | ||
LSR2.networkLayer.ip.arpModule | string | ||
LSR2.networkLayer.ip.icmpModule | string | ||
LSR2.networkLayer.ip.procDelay | double | 0s | |
LSR2.networkLayer.ip.timeToLive | int | 32 | |
LSR2.networkLayer.ip.multicastTimeToLive | int | 32 | |
LSR2.networkLayer.ip.fragmentTimeout | double | 60s | |
LSR2.networkLayer.ip.forceBroadcast | bool | false | |
LSR2.networkLayer.icmp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.networkLayer.icmp.routingTableModule | string | ||
LSR2.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.lo0.lo.mtu | int | 4470B | |
LSR2.mpls.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR2.mpls.libTableModule | string | ||
LSR2.libTable.config | xml | xml(" |
table contents to be loaded on startup |
LSR3.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
LSR3.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
LSR3.routingTable.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.routingTable.netmaskRoutes | string | "*" |
maintain netmask routes for interfaces |
LSR3.routingTable.multicastForwarding | bool | false |
turns multicast forwarding on/off |
LSR3.routingTable.useAdminDist | bool | false |
Use Cisco like administrative distances |
LSR3.routingTable.routingFile | string | "" |
routing table file name |
LSR3.ldp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.ldp.routingTableModule | string | ||
LSR3.ldp.libTableModule | string | ||
LSR3.ldp.tedModule | string | ||
LSR3.ldp.dataTransferMode | string | "bytecount" |
TCP data transfer mode |
LSR3.ted.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.ted.routingTableModule | string | ||
LSR3.linkStateRouting.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.linkStateRouting.routingTableModule | string | ||
LSR3.linkStateRouting.tedModule | string | ||
LSR3.networkLayer.configurator.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.networkLayer.configurator.networkConfiguratorModule | string | "configurator" |
TODO: eventually rename to networkConfigurator |
LSR3.networkLayer.configurator.configureRoutingTable | bool | true |
add routing entries to routing table (uses the configurator module) |
LSR3.networkLayer.ip.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.networkLayer.ip.routingTableModule | string | ||
LSR3.networkLayer.ip.arpModule | string | ||
LSR3.networkLayer.ip.icmpModule | string | ||
LSR3.networkLayer.ip.procDelay | double | 0s | |
LSR3.networkLayer.ip.timeToLive | int | 32 | |
LSR3.networkLayer.ip.multicastTimeToLive | int | 32 | |
LSR3.networkLayer.ip.fragmentTimeout | double | 60s | |
LSR3.networkLayer.ip.forceBroadcast | bool | false | |
LSR3.networkLayer.icmp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.networkLayer.icmp.routingTableModule | string | ||
LSR3.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.lo0.lo.mtu | int | 4470B | |
LSR3.mpls.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR3.mpls.libTableModule | string | ||
LSR3.libTable.config | xml | xml(" |
table contents to be loaded on startup |
LSR4.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
LSR4.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
LSR4.routingTable.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.routingTable.netmaskRoutes | string | "*" |
maintain netmask routes for interfaces |
LSR4.routingTable.multicastForwarding | bool | false |
turns multicast forwarding on/off |
LSR4.routingTable.useAdminDist | bool | false |
Use Cisco like administrative distances |
LSR4.routingTable.routingFile | string | "" |
routing table file name |
LSR4.ldp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.ldp.routingTableModule | string | ||
LSR4.ldp.libTableModule | string | ||
LSR4.ldp.tedModule | string | ||
LSR4.ldp.dataTransferMode | string | "bytecount" |
TCP data transfer mode |
LSR4.ted.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.ted.routingTableModule | string | ||
LSR4.linkStateRouting.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.linkStateRouting.routingTableModule | string | ||
LSR4.linkStateRouting.tedModule | string | ||
LSR4.networkLayer.configurator.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.networkLayer.configurator.networkConfiguratorModule | string | "configurator" |
TODO: eventually rename to networkConfigurator |
LSR4.networkLayer.configurator.configureRoutingTable | bool | true |
add routing entries to routing table (uses the configurator module) |
LSR4.networkLayer.ip.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.networkLayer.ip.routingTableModule | string | ||
LSR4.networkLayer.ip.arpModule | string | ||
LSR4.networkLayer.ip.icmpModule | string | ||
LSR4.networkLayer.ip.procDelay | double | 0s | |
LSR4.networkLayer.ip.timeToLive | int | 32 | |
LSR4.networkLayer.ip.multicastTimeToLive | int | 32 | |
LSR4.networkLayer.ip.fragmentTimeout | double | 60s | |
LSR4.networkLayer.ip.forceBroadcast | bool | false | |
LSR4.networkLayer.icmp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.networkLayer.icmp.routingTableModule | string | ||
LSR4.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.lo0.lo.mtu | int | 4470B | |
LSR4.mpls.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR4.mpls.libTableModule | string | ||
LSR4.libTable.config | xml | xml(" |
table contents to be loaded on startup |
LSR5.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
LSR5.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
LSR5.routingTable.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.routingTable.netmaskRoutes | string | "*" |
maintain netmask routes for interfaces |
LSR5.routingTable.multicastForwarding | bool | false |
turns multicast forwarding on/off |
LSR5.routingTable.useAdminDist | bool | false |
Use Cisco like administrative distances |
LSR5.routingTable.routingFile | string | "" |
routing table file name |
LSR5.ldp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.ldp.routingTableModule | string | ||
LSR5.ldp.libTableModule | string | ||
LSR5.ldp.tedModule | string | ||
LSR5.ldp.dataTransferMode | string | "bytecount" |
TCP data transfer mode |
LSR5.ted.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.ted.routingTableModule | string | ||
LSR5.linkStateRouting.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.linkStateRouting.routingTableModule | string | ||
LSR5.linkStateRouting.tedModule | string | ||
LSR5.networkLayer.configurator.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.networkLayer.configurator.networkConfiguratorModule | string | "configurator" |
TODO: eventually rename to networkConfigurator |
LSR5.networkLayer.configurator.configureRoutingTable | bool | true |
add routing entries to routing table (uses the configurator module) |
LSR5.networkLayer.ip.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.networkLayer.ip.routingTableModule | string | ||
LSR5.networkLayer.ip.arpModule | string | ||
LSR5.networkLayer.ip.icmpModule | string | ||
LSR5.networkLayer.ip.procDelay | double | 0s | |
LSR5.networkLayer.ip.timeToLive | int | 32 | |
LSR5.networkLayer.ip.multicastTimeToLive | int | 32 | |
LSR5.networkLayer.ip.fragmentTimeout | double | 60s | |
LSR5.networkLayer.ip.forceBroadcast | bool | false | |
LSR5.networkLayer.icmp.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.networkLayer.icmp.routingTableModule | string | ||
LSR5.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.lo0.lo.mtu | int | 4470B | |
LSR5.mpls.interfaceTableModule | string |
The path to the InterfaceTable module |
|
LSR5.mpls.libTableModule | string | ||
LSR5.libTable.config | xml | xml(" |
table contents to be loaded on startup |
host1.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
host1.routingTable.forwarding | bool | ||
host1.routingTable.multicastForwarding | bool | ||
host1.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
host1.pcapRecorder.verbose | bool | false |
whether to log packets on the module output |
host1.pcapRecorder.pcapFile | string | "" |
the PCAP file to be written |
host1.pcapRecorder.snaplen | int | 65535 |
maximum number of bytes to record per packet |
host1.pcapRecorder.dumpBadFrames | bool | true |
enable dump of frames with hasBitError |
host1.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*] ext[*]" |
space-separated list of sibling module names to listen on |
host1.pcapRecorder.sendingSignalNames | string | "packetSentToLower" |
space-separated list of outbound packet signals to subscribe to |
host1.pcapRecorder.receivingSignalNames | string | "packetReceivedFromLower" |
space-separated list of inbound packet signals to subscribe to |
host1.pcapRecorder.alwaysFlush | bool | false |
flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
host1.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
host1.lo0.lo.mtu | int | 4470B | |
host2.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
host2.routingTable.forwarding | bool | ||
host2.routingTable.multicastForwarding | bool | ||
host2.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
host2.pcapRecorder.verbose | bool | false |
whether to log packets on the module output |
host2.pcapRecorder.pcapFile | string | "" |
the PCAP file to be written |
host2.pcapRecorder.snaplen | int | 65535 |
maximum number of bytes to record per packet |
host2.pcapRecorder.dumpBadFrames | bool | true |
enable dump of frames with hasBitError |
host2.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*] ext[*]" |
space-separated list of sibling module names to listen on |
host2.pcapRecorder.sendingSignalNames | string | "packetSentToLower" |
space-separated list of outbound packet signals to subscribe to |
host2.pcapRecorder.receivingSignalNames | string | "packetReceivedFromLower" |
space-separated list of inbound packet signals to subscribe to |
host2.pcapRecorder.alwaysFlush | bool | false |
flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
host2.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
host2.lo0.lo.mtu | int | 4470B | |
host3.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
host3.routingTable.forwarding | bool | ||
host3.routingTable.multicastForwarding | bool | ||
host3.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
host3.pcapRecorder.verbose | bool | false |
whether to log packets on the module output |
host3.pcapRecorder.pcapFile | string | "" |
the PCAP file to be written |
host3.pcapRecorder.snaplen | int | 65535 |
maximum number of bytes to record per packet |
host3.pcapRecorder.dumpBadFrames | bool | true |
enable dump of frames with hasBitError |
host3.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*] ext[*]" |
space-separated list of sibling module names to listen on |
host3.pcapRecorder.sendingSignalNames | string | "packetSentToLower" |
space-separated list of outbound packet signals to subscribe to |
host3.pcapRecorder.receivingSignalNames | string | "packetReceivedFromLower" |
space-separated list of inbound packet signals to subscribe to |
host3.pcapRecorder.alwaysFlush | bool | false |
flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
host3.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
host3.lo0.lo.mtu | int | 4470B | |
host4.status.initialStatus | string | "UP" |
TODO @signal, @statistic |
host4.routingTable.forwarding | bool | ||
host4.routingTable.multicastForwarding | bool | ||
host4.interfaceTable.displayAddresses | bool | false |
whether to display IP addresses on links |
host4.pcapRecorder.verbose | bool | false |
whether to log packets on the module output |
host4.pcapRecorder.pcapFile | string | "" |
the PCAP file to be written |
host4.pcapRecorder.snaplen | int | 65535 |
maximum number of bytes to record per packet |
host4.pcapRecorder.dumpBadFrames | bool | true |
enable dump of frames with hasBitError |
host4.pcapRecorder.moduleNamePatterns | string | "wlan[*] eth[*] ppp[*] ext[*]" |
space-separated list of sibling module names to listen on |
host4.pcapRecorder.sendingSignalNames | string | "packetSentToLower" |
space-separated list of outbound packet signals to subscribe to |
host4.pcapRecorder.receivingSignalNames | string | "packetReceivedFromLower" |
space-separated list of inbound packet signals to subscribe to |
host4.pcapRecorder.alwaysFlush | bool | false |
flush the pcapFile after each write to ensure that all packets are captured in case of a crash |
host4.lo0.lo.interfaceTableModule | string |
The path to the InterfaceTable module |
|
host4.lo0.lo.mtu | int | 4470B | |
scenarioManager.script | xml | xml("") |
network LDPTEST { parameters: **.networkLayer.configurator.networkConfiguratorModule = ""; types: channel C5 extends DatarateChannel { datarate = 600kbps; delay = 5us; } channel C10 extends DatarateChannel { datarate = 600kbps; delay = 10us; } channel C15 extends DatarateChannel { datarate = 600kbps; delay = 15us; } submodules: LSR1: LDP_LSR { parameters: peers = "ppp0 ppp1 ppp2"; @display("p=150,200"); gates: pppg[4]; } LSR2: LDP_LSR { parameters: peers = "ppp0 ppp1 ppp2 ppp3"; @display("p=250,200"); gates: pppg[4]; } LSR3: LDP_LSR { parameters: peers = "ppp0 ppp1 ppp2"; @display("p=350,200"); gates: pppg[4]; } LSR4: LDP_LSR { parameters: peers = "ppp0 ppp1 ppp2"; @display("p=250,100"); gates: pppg[4]; } LSR5: LDP_LSR { parameters: peers = "ppp0 ppp1 ppp2"; @display("p=250,300"); gates: pppg[4]; } host1: StandardHost { // client parameters: @display("p=40,200;i=device/pc2"); } host2: StandardHost { // client parameters: @display("p=440,200;i=device/pc2"); } host3: StandardHost { // client parameters: @display("p=250,10;i=device/pc2"); } host4: StandardHost { // client parameters: @display("p=250,390;i=device/pc2"); } scenarioManager: ScenarioManager { parameters: @display("p=150,50"); } lifecycleController: LifecycleController { parameters: @display("p=350,50"); } connections: LSR1.pppg[0] <--> C15 <--> LSR2.pppg[0]; LSR1.pppg[1] <--> C5 <--> LSR4.pppg[0]; LSR1.pppg[2] <--> C5 <--> LSR5.pppg[0]; LSR2.pppg[1] <--> C5 <--> LSR3.pppg[0]; LSR2.pppg[2] <--> C5 <--> LSR4.pppg[1]; LSR2.pppg[3] <--> C5 <--> LSR5.pppg[1]; LSR3.pppg[1] <--> C10 <--> LSR4.pppg[2]; LSR3.pppg[2] <--> C10 <--> LSR5.pppg[2]; host1.pppg++ <--> C10 <--> LSR1.pppg[3]; host2.pppg++ <--> C10 <--> LSR3.pppg[3]; host3.pppg++ <--> C10 <--> LSR4.pppg[3]; host4.pppg++ <--> C10 <--> LSR5.pppg[3]; }