Ieee80211ReceiverBase

Package: inet.physicallayer.wireless.ieee80211.packetlevel

Ieee80211ReceiverBase

compound module

This receiver model serves as the base module for IEEE 802.11 receivers. It supports switching channels, configuring different operation modes, and preamble modes.

See also: Ieee80211TransmitterBase, Ieee80211ScalarReceiver, Ieee80211DimensionalReceiver.

errorModel : like IErrorModel

IErrorModel: The error model describes how the signal to noise ratio affects the amount of errors at the...

Source:
errorModel: <> like IErrorModel if typename != "" {
    @display("p=100,100");
}

Inheritance diagram

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Known subclasses

Name Type Description
Ieee80211DimensionalReceiver compound module

This receiver model receives an IEEE 802.11 transmission successfully if the minimum of the signal to noise and interference ratio over the duration of the reception is sufficiently high. It uses one of the IEEE 802.11 specific error models to compute the error rate based on this value and the used operation mode.

Ieee80211ScalarReceiver compound module

This receiver model receives an IEEE 802.11 transmission successfully if the minimum of the signal to noise and interference ratio over the duration of the reception is sufficiently high. It uses one of the IEEE 802.11 specific error models to compute the error rate based on this value and the used operation mode.

Ieee80211UnitDiskReceiver compound module

See also: Ieee80211UnitDiskTransmitter, Ieee80211UnitDiskRadio, UnitDiskRadioMedium.

Extends

Name Type Description
NarrowbandReceiverBase compound module

This module servces as a base module for narrowband receiver models.

Parameters

Name Type Default value Description
snirThreshold double

reception is not successful if the SNIR is below this threshold (unsuccessful reception)

snirThresholdMode string "min"
energyDetection double

no signal is detected at all below this reception power threshold (idle state)

sensitivity double

reception is not possible if the signal power is below sensitivity (idle or busy states)

centerFrequency double

center frequency of the band where this receiver listens on the medium

bandwidth double

bandwidth of the band where this receiver listens on the medium

modulation string "BPSK"

one of "BPSK", "16-QAM", "256-QAM"

opMode string
bandName string
channelNumber int

Properties

Name Value Description
display i=block/wrx

Source code

//
// This receiver model serves as the base module for IEEE 802.11 receivers. It
// supports switching channels, configuring different operation modes, and
// preamble modes.
//
// @see ~Ieee80211TransmitterBase, ~Ieee80211ScalarReceiver,
// ~Ieee80211DimensionalReceiver.
//
module Ieee80211ReceiverBase extends NarrowbandReceiverBase
{
    parameters:
        string opMode @enum("a","b","g(erp)","g(mixed)","n(mixed-2.4Ghz)","p","ac");
        string bandName @enum("2.4 GHz","5 GHz","5 GHz (20 MHz)","5 GHz (40 MHz)","5 GHz (80 MHz)","5 GHz (160 MHz)","5.9 GHz");
        int channelNumber;
        modulation = default("BPSK"); // TODO this is simply wrong
        errorModel.typename = default("Ieee80211NistErrorModel");
        // TODO remove when opMode is removed from the error model
        *.opMode = this.opMode;
}

File: src/inet/physicallayer/wireless/ieee80211/packetlevel/Ieee80211ReceiverBase.ned