Package: inet.examples.wireless.throughput

ThroughputClient

compound module

(no description)

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Used in

Name	Type	Description
Throughput	network	(no description)

Properties

Name	Value	Description
display	i=device/wifilaptop
networkNode

Gates

Name	Direction	Size	Description
radioIn	input

Unassigned submodule parameters

Name	Type	Default value	Description
cli.displayStringTextFormat	string	""	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cli.interfaceTableModule	string
cli.destAddress	string	""	Destination MAC address, or module path name of destination station; empty means off
cli.startTime	double	this.sendInterval	Time of sending the first request
cli.stopTime	double	-1s	Time of finishing sending, negative values mean forever
cli.localSAP	int	0xf0	Local service access point
cli.remoteSAP	int	0xf1	Remote service access point
cli.sendInterval	double	uniform(0s,1s)	Interval between sending requests
cli.reqLength	int	100B	Length of request packets
cli.respLength	int	1KiB	Length of response packets
cli.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
cli.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
wlan.pcapRecorder.displayStringTextFormat	string	"rec: %n pks"	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
wlan.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
wlan.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
wlan.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
wlan.pcapRecorder.pcapFile	string	""	The PCAP file to be written, suggested value: pcapFile = "${resultdir}/${configname}-#${runnumber}" + fullpath() + ".pcap"
wlan.pcapRecorder.fileFormat	string	"pcapng"
wlan.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
wlan.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see 'if_tsresol' option in pcapng file format).
wlan.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
wlan.pcapRecorder.sendingSignalNames	string	"transmissionEnded"	Space-separated list of outbound packet signals to subscribe to
wlan.pcapRecorder.receivingSignalNames	string	"receptionEnded"	Space-separated list of inbound packet signals to subscribe to
wlan.pcapRecorder.dumpProtocols	string	"ethernetmac ppp ieee80211mac"	Space-separated list of protocol names as defined in the Protocol class
wlan.pcapRecorder.packetFilter	object	"*"	Which packets are considered, matches all packets by default
wlan.pcapRecorder.helpers	string	""	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
wlan.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
wlan.mib.displayStringTextFormat	string	""	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
wlan.mgmt.macModule	string		The path to the MAC module
interfaceTable.displayStringTextFormat	string	""	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
interfaceTable.displayAddresses	bool	false	Whether to display IP addresses on links
mobility.displayStringTextFormat	string	"p: %p\nv: %v"	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
mobility.subjectModule	string	"^"	The module path that determines the subject module, the motion of which this mobility model describes. The default value is the parent module
mobility.coordinateSystemModule	string	""	The module path of the geographic coordinate system module
mobility.updateDisplayString	bool	true	Enables continuous update of the subject module's position by modifying its display string
mobility.constraintAreaMinX	double	-inf m	The minimum x position of the constraint area. It is unconstrained by default (negative infinity)
mobility.constraintAreaMinY	double	-inf m	The minimum y position of the constraint area. It is unconstrained by default (negative infinity)
mobility.constraintAreaMinZ	double	-inf m	The minimum z position of the constraint area. It is unconstrained by default (negative infinity)
mobility.constraintAreaMaxX	double	inf m	The maximum x position of the constraint area. It is unconstrained by default (positive infinity)
mobility.constraintAreaMaxY	double	inf m	The maximum y position of the constraint area. It is unconstrained by default (positive infinity)
mobility.constraintAreaMaxZ	double	inf m	The maximum z position of the constraint area. It is unconstrained by default (positive infinity)
mobility.initialX	double	uniform(this.constraintAreaMinX, this.constraintAreaMaxX)
mobility.initialY	double	uniform(this.constraintAreaMinY, this.constraintAreaMaxY)
mobility.initialZ	double	nanToZero(uniform(this.constraintAreaMinZ, this.constraintAreaMaxZ))
mobility.initialLatitude	double	nan deg
mobility.initialLongitude	double	nan deg
mobility.initialAltitude	double	0m
mobility.initialHeading	double	0deg
mobility.initialElevation	double	0deg
mobility.initialBank	double	0deg
mobility.initFromDisplayString	bool	true	Enables one-time initialization from the subject module's display string
mobility.updateFromDisplayString	bool	true	Enables continuous update from the subject module's display string for dragging and rotating it

Source code

module ThroughputClient
{
    parameters:
        @display("i=device/wifilaptop");
        @networkNode();
        *.interfaceTableModule = "^.interfaceTable";
        wlan.radio.antenna.mobilityModule = default("^.^.^.mobility");
    gates:
        input radioIn @directIn;

    submodules:
        cli: EtherAppClient {
            parameters:
                interface = "wlan";
                @display("p=300,100");
        }
        wlan: Ieee80211Interface {
            parameters:
                @display("p=250,200;q=queue");
                mgmt.typename = "Ieee80211MgmtStaSimplified";
                agent.typename = "";
        }
        interfaceTable: InterfaceTable {
            parameters:
                @display("p=100,100;is=s");
        }
        mobility: StationaryMobility {
            parameters:
                @display("p=100,200;is=s");
        }
    connections allowunconnected:
        wlan.radioIn <-- radioIn;
        cli.out --> wlan.upperLayerIn;
}

File: examples/wireless/throughput/Throughput.ned