IIeee8021dQosClassifier

module interface

Interface for 802.1d QoS classifiers. For each packet, the classifier computes a 802.1d User Priority (UP) value, and sets in on the Iee802Ctrl control info before sending out the packet on the "out" gate.

Inheritance diagram

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Implemented by

Name	Type	Description
ExampleQosClassifier	simple module	An example QoS classifier that assigns a User Priority based on the transport protocol and port numbers.
QosClassifier	simple module	This module classifies packets and assigns a User Priority based on the IP protocol or the transport protocol port numbers.
RandomQosClassifier	simple module	A QoS classifier that assigns a random User Priority. This is useful for testing purposes.

Used in compound modules

Name	Type	Description
ExtUpperIeee80211Interface	compound module	This module provides an IEEE 802.11 network interface suitable for emulation. The upper part of the network interface is realized in the real world using a real TAP device of the host computer which is running the simulation.
Ieee80211Interface	compound module	This NIC implements an 802.11 network interface card. It can be configured via the mgmt.typename parameter to act as an AP or a STA, or for ad-hoc mode.
WirelessInterface	compound module	(no description)

Properties

Name	Value	Description
display	i=block/fork

Source code

//
// Interface for 802.1d QoS classifiers. For each packet, the classifier
// computes a 802.1d User Priority (UP) value, and sets in on the
// Iee802Ctrl control info before sending out the packet on the "out" gate.
//
moduleinterface IIeee8021dQosClassifier
{
    parameters:
        @display("i=block/fork");
    gates:
        input in;
        output out;
}

File: src/inet/linklayer/common/IIeee8021dQosClassifier.ned