TelnetApp

simple module

Models Telnet sessions with a specific user behaviour. The server app should be TcpGenericServerApp. Compatible with both Ipv4 and Ipv6.

NOTE: This module emulates a very specific user behaviour, and as such, it should be viewed as an example rather than a generic Telnet model. If you want to model realistic Telnet traffic, you are encouraged to gather statistics from packet traces on a real network, and write your model accordingly.

Inheritance diagram

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram.

Parameters

Name	Type	Default value	Description
localAddress	string	""	local address or empty ("")
localPort	int		local port number
connectAddress	string		server address (may be symbolic)
connectPort	int	1000	port number to connect to
startTime	double	1s	time first session begins
stopTime	double	-1s	time of finishing sending, negative values mean forever
numCommands	int	int(exponential(10))	user types this many commands in a session
commandLength	int	10B	commands are this many characters (plus Enter)
keyPressDelay	double	exponential(0.1s)	delay between keypresses
commandOutputLength	int	intWithUnit(exponential(1000B))	commands produce this much output
thinkTime	double	exponential(10s)	user waits this much before starting to type new command
idleInterval	double	exponential(300s)	time gap between sessions
reconnectInterval	double	30s	if connection breaks, user waits this much before trying to reconnect
timeToLive	int	-1	if not -1, set the TTL (IPv4) or Hop Limit (IPv6) field of sent packets to this value
dscp	int	-1	if not -1, set the ToS (IPv4) or Traffic Class (IPv6) field of sent packets to this value
tos	int	-1	if not -1, set the Type Of Service (IPv4) / Traffic Class (IPv6) field of sent packets to this value
stopOperationExtraTime	double	-1s	extra time after lifecycle stop operation finished
stopOperationTimeout	double	2s	timeout value for lifecycle stop operation

Properties

Name	Value	Description
display	i=block/telnet
lifecycleSupport

Gates

Name	Direction	Size	Description
socketIn	input
socketOut	output

Signals

Name	Type	Unit
packetReceived	inet::Packet
packetSent	inet::Packet
connect	long

Statistics

Name	Title	Source	Record	Unit	Interpolation Mode
packetReceived	packets received	packetReceived	count, sum(packetBytes), vector(packetBytes)		none
numSessions	total number of sessions	sum(connect+1)/2	last
packetSent	packets sent	packetSent	count, sum(packetBytes), vector(packetBytes)		none
numActiveSessions	number of active sessions	sum(connect)	max, timeavg, vector		sample-hold
endToEndDelay	end-to-end delay	dataAge(packetReceived)	histogram, weightedHistogram, vector	s	none

Source code

//
// Models Telnet sessions with a specific user behaviour.
// The server app should be ~TcpGenericServerApp.
// Compatible with both ~Ipv4 and ~Ipv6.
//
// NOTE: This module emulates a very specific user behaviour, and as such,
// it should be viewed as an example rather than a generic Telnet model.
// If you want to model realistic Telnet traffic, you are encouraged
// to gather statistics from packet traces on a real network, and
// write your model accordingly.
//
simple TelnetApp like IApp
{
    parameters:
        string localAddress = default(""); // local address or empty ("")
        int localPort; // local port number
        string connectAddress;  // server address (may be symbolic)
        int connectPort = default(1000); // port number to connect to
        double startTime @unit(s) = default(1s); // time first session begins
        double stopTime @unit(s) = default(-1s);  // time of finishing sending, negative values mean forever
        volatile int numCommands = default(int(exponential(10))); // user types this many commands in a session
        volatile int commandLength @unit(B) = default(10B); // commands are this many characters (plus Enter)
        volatile double keyPressDelay @unit(s) = default(exponential(0.1s)); // delay between keypresses
        volatile int commandOutputLength @unit(B) = default(intWithUnit(exponential(1000B))); // commands produce this much output
        volatile double thinkTime @unit(s) = default(exponential(10s)); // user waits this much before starting to type new command
        volatile double idleInterval @unit(s) = default(exponential(300s)); // time gap between sessions
        volatile double reconnectInterval @unit(s) = default(30s);  // if connection breaks, user waits this much before trying to reconnect
        int timeToLive = default(-1); // if not -1, set the TTL (IPv4) or Hop Limit (IPv6) field of sent packets to this value
        int dscp = default(-1); // if not -1, set the ToS (IPv4) or Traffic Class (IPv6) field of sent packets to this value
        int tos = default(-1); // if not -1, set the Type Of Service (IPv4) / Traffic Class (IPv6) field of sent packets to this value
        @display("i=block/telnet");
        @lifecycleSupport;
        double stopOperationExtraTime @unit(s) = default(-1s);    // extra time after lifecycle stop operation finished
        double stopOperationTimeout @unit(s) = default(2s);    // timeout value for lifecycle stop operation
        @signal[packetSent](type=inet::Packet);
        @signal[packetReceived](type=inet::Packet);
        @signal[connect](type=long);  // 1 for open, -1 for close
        @statistic[packetReceived](title="packets received"; source=packetReceived; record=count,"sum(packetBytes)","vector(packetBytes)"; interpolationmode=none);
        @statistic[packetSent](title="packets sent"; source=packetSent; record=count,"sum(packetBytes)","vector(packetBytes)"; interpolationmode=none);
        @statistic[endToEndDelay](title="end-to-end delay"; source="dataAge(packetReceived)"; unit=s; record=histogram,weightedHistogram,vector; interpolationmode=none);
        @statistic[numActiveSessions](title="number of active sessions"; source="sum(connect)"; record=max,timeavg,vector; interpolationmode=sample-hold; );
        @statistic[numSessions](title="total number of sessions"; source="sum(connect+1)/2"; record=last);

    gates:
        input socketIn @labels(TcpCommand/up);
        output socketOut @labels(TcpCommand/down);
}

File: src/inet/applications/tcpapp/TelnetApp.ned