Msg File src/inet/networklayer/icmpv6/ICMPv6Message.msg

Name Type Description
ICMPv6Type enum (no description)
ICMPv6DEST_UN enum

ICMPv6 "codes" for type ICMPv6_DESTINATION_UNREACHABLE

ICMPv6_TIME_EX enum

ICMPv6 "codes" for type ICMPv6_TIME_EXCEEDED

ICMPv6_PARAMETER_PROB enum

ICMPv6 "codes" for type ICMPv6_PARAMETER_PROBLEM

ICMPv6Message packet

Represents an ICMPv6 packet.

ICMPv6DestUnreachableMsg packet

Notes: 1. As defined in RFC2463: Section 3

ICMPv6PacketTooBigMsg packet (no description)
ICMPv6TimeExceededMsg packet (no description)
ICMPv6ParamProblemMsg packet (no description)
ICMPv6EchoRequestMsg packet

ICMPv6 Echo Request packet (RFC2463: Section 4). Data is attached through encapsulation (see ICMPv6.cc)

ICMPv6EchoReplyMsg packet

ICMPv6 Echo Reply packet. Data is attached through encapsulation (see ICMPv6.cc)

Source code:

//
// Copyright (C) 2001 CTIE, Monash University
// Copyright (C) 2005 Andras Varga
// Copyright (C) 2005 Wei Yang, Ng
//
// This program is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public License
// as published by the Free Software Foundation; either version 2
// of the License, or (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with this program; if not, see <http://www.gnu.org/licenses/>.
//

cplusplus {{
#include "inet/common/INETDefs.h"
#define ICMPv6_HEADER_BYTES  8
}}

namespace inet;

//
//# TODO consolidate this file's contents with ICMPMessage.msg
//

enum ICMPv6Type
{

    ICMPv6_UNSPECIFIED = 0;
    ICMPv6_DESTINATION_UNREACHABLE = 1;
    ICMPv6_PACKET_TOO_BIG = 2;
    ICMPv6_TIME_EXCEEDED = 3;
    ICMPv6_PARAMETER_PROBLEM = 4;
    ICMPv6_ECHO_REQUEST = 128;
    ICMPv6_ECHO_REPLY = 129;
    ICMPv6_MLD_QUERY = 130;
    ICMPv6_MLD_REPORT = 131;
    ICMPv6_MLD_DONE = 132;
    ICMPv6_ROUTER_SOL = 133;
    ICMPv6_ROUTER_AD = 134;
    ICMPv6_NEIGHBOUR_SOL = 135;
    ICMPv6_NEIGHBOUR_AD = 136;
    ICMPv6_REDIRECT = 137;
    ICMPv6_MLDv2_REPORT = 143;
    ICMPv6_EXPERIMENTAL_MOBILITY = 150;  //Zarrar Yousaf 02.08.07 (FMIPv6 Implementation)
}


//cplusplus {{
//typedef int ICMPv6Code;
//}}


//
// ICMPv6 "codes" for type ICMPv6_DESTINATION_UNREACHABLE
//
enum ICMPv6DEST_UN
{

    NO_ROUTE_TO_DEST = 0;
    COMM_WITH_DEST_PROHIBITED = 1;
    //2 - NOT ASSIGNED
    ADDRESS_UNREACHABLE = 3;
    PORT_UNREACHABLE = 4;
}


//
// ICMPv6 "codes" for type ICMPv6_TIME_EXCEEDED
//
enum ICMPv6_TIME_EX
{

    ND_HOP_LIMIT_EXCEEDED = 0;
    ND_FRAGMENT_REASSEMBLY_TIME = 1;
}

//
// ICMPv6 "codes" for type ICMPv6_PARAMETER_PROBLEM
//
enum ICMPv6_PARAMETER_PROB
{

    ERROREOUS_HDR_FIELD = 0;
    UNRECOGNIZED_NEXT_HDR_TYPE = 1;
    UNRECOGNIZED_IPV6_OPTION = 2;
}


//
// Represents an ICMPv6 packet.
//
// Notes:
//    1. number of octets excluding the error datagram that is usually appended
//       in optInfo, i.e. the Type|CODE|CHECKSUM|UNUSED/POINTER/MTU/OTHER
//       as defined in RFC2463
//    2. Any ICMP type with MSB set, i.e. >=128 is an Informational ICMP message
//
packet ICMPv6Message
{
    int type @enum(ICMPv6Type);
        //int code; //TODO: this should be specific to different ICMP types.
}

//
// Notes:
//   1. As defined in RFC2463: Section 3
//
packet ICMPv6DestUnreachableMsg extends ICMPv6Message
{
    int code @enum(ICMPv6DEST_UN);
}

packet ICMPv6PacketTooBigMsg extends ICMPv6Message
{
    int code; //Set to 0 by sender and ignored by receiver.
    int MTU; //MTU of next-hop link
}

packet ICMPv6TimeExceededMsg extends ICMPv6Message
{
    int code @enum(ICMPv6_TIME_EX);
}

packet ICMPv6ParamProblemMsg extends ICMPv6Message
{
    int code @enum(ICMPv6_PARAMETER_PROB);
}

//
// ICMPv6 Echo Request packet (RFC2463: Section 4).
// Data is attached through encapsulation (see ICMPv6.cc)
//
packet ICMPv6EchoRequestMsg extends ICMPv6Message
{
    int code; //set to 0.
    int identifier; // identifier to aid in matching Echo replies. May be Zero
    int seqNumber; // sequence number to aid in matching Echo replies. May be Zero
        //Data is attached through encapsulation. See ICMPv6.cc
}

//
// ICMPv6 Echo Reply packet. Data is attached through encapsulation (see ICMPv6.cc)
//
packet ICMPv6EchoReplyMsg extends ICMPv6Message
{
    int code; //set to 0.
    int identifier; // identifier to aid in matching Echo replies. May be Zero
    int seqNumber; // sequence number to aid in matching Echo replies. May be Zero
}