NED File src/inet/common/scenario/ScenarioManager.ned

Name	Type	Description
ScenarioManager	simple module	ScenarioManager is for setting up and controlling simulation experiments. You can schedule certain events to take place at specified times, like changing a parameter value, changing the bit error rate of a connection, removing or adding connections, removing or adding routes in a routing table, etc, so that you can observe the transient behaviour.

Source code:

//
// Copyright (C) 2005 Andras Varga
//
// This program is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public License
// as published by the Free Software Foundation; either version 2
// of the License, or (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with this program; if not, see <http://www.gnu.org/licenses/>.
//


package inet.common.scenario;

//
// ~ScenarioManager is for setting up and controlling simulation experiments.
// You can schedule certain events to take place at specified times,
// like changing a parameter value, changing the bit error rate of
// a connection, removing or adding connections, removing or
// adding routes in a routing table, etc, so that you can observe the
// transient behaviour.
//
// ~ScenarioManager executes a script specified in XML. It has a few
// built-in commands, while other commands are dispatched to be carried out
// by given simple modules. (The C++ class of these simple modules' needs
// to implement the IScriptable interface, and the processCommand() method
// must be redefined accordingly).
//
// An example script:
//
// <pre>
// <scenario>
//     <set-param t="10" module="host[1].mobility" par="speed" value="5"/>
//     <set-param t="20" module="host[1].mobility" par="speed" value="30"/>
//     <at t="50">
//         <set-param module="host[2].mobility" par="speed" value="10"/>
//         <set-param module="host[3].mobility" par="speed" value="10"/>
//         <connect src-module="host[2]" src-gate="ppp[0]"
//                  dest-module="host[1]" dest-gate="ppp[0]"
//                  channel-type="ned.DatarateChannel">
//             <param name="datarate" value="10Mbps" />
//             <param name="delay" value="0.1us" />
//         </connect>
//     </at>
//     <at t="60">
//         <disconnect src-module="host[2]" src-gate="ppp[0]" />
//         <disconnect src-module="host[1]" src-gate="ppp[0]" />
//     </at>
// </scenario>
// </pre>
//
// Built-in commands: <set-param>, <set-channel-attr>, <at>.
//
// All commands have a t attribute which carries the simulation time
// at which the command has to be carried out. You can group several commands
// to be carried out at the same simulation time using <at>, and
// then only the <at> command is needed to have a t attribute.
//
// connect/disconnect working between nodes, with have same parent
//
// Supported attributes:
//    - <set-param>: module, par, value.
//    - <set-channel-attr>: src-module, src-gate, attr, value.
//    - <connect>: src-module, src-gate, dest-module, dest-gate, channel-type
//        - <param>: name, value
//    - <disconnect>: src-module, src-gate
//          FIXME - TRANSLATE: a src-gate lehet inout gate is, akkor mindket iranyra disconnect
//
simple ScenarioManager
{
    parameters:
        xml script = default(xml("<script></script>"));
        @display("i=block/control_s");
        @labels(node,mpls-node);
}